!WARNING!
GETTING STARTED
• This Paintball Marker is NOT A TOY. Misuse can cause serious
• Tank valves must be installed or removed by qualified personnel.
1. First, place the BARREL BLOCKING DEVICE over the barrel.
• All tanks must be retested before the expiration date.
2. Always point your marker in a “SAFE” direction when not in play. The Safety is ON when it protrudes out on the right hand side of the grip frame. Point the marker in the safe direction before unlocking it. To disengage the Safety, push the Safety Button so it protrudes out on the left side of the grip frame.
IMPORTANT SAFETY INSTRUCTION AND GUIDELINS
injury or death.
• Recommend 18 years or older to purchase this product. Person under 18 must have adult supervision. • Read this manual, understand and follow the manual instructions for using this product. • Eye and face protection specially designed for paintball use, must be worn by user and persons within range at all times. • Treat all paintball markers as if it were loaded and able to fire. • Never look down the barrel or breech area of a marker. • Always use barrel blocking device when the marker is not in use. • Always chronograph this marker before playing paintball. • Never shoot any marker at velocities exceeds 300 FPS (Feet Per Second), or velocities which is greater than local fields or national laws allow. • Ensure all air lines and fittings are tightened and secured before installing the air tanks.
IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES
• Improper use, filling, storage of this air tank may cause death, serious injury and property damage. • Air tanks must be filled only by properly trained personnel. • Do not over pressurize. Do not expose pressurized tanks to temperatures in excess of 130F° degrees (54°C). • Do not expose tanks to corrosive materials and do not clean with caustic cleaners. • Do not alter tanks in any way. • Tanks heated up to a temperature of 250F° degrees (54°C) or more must be condemned or re-qualified. • Keep air tanks out of reach of children. • The valve should NEVER detach from the tank canister. Should this occur, seek assistance from a qualified airsmith immediately. • Air tanks are use for the sport of paintball only.
• Do not shoot at people, animals, houses, cars or anything is not related to the sport of paintball.
3. Firmly screw in the CO2/ HPA/ N2 air tank to the bottom ASA (KBA2). Tighten the air tank clockwise all the way into the marker’s bottom ASA until it stops. CAUTION: Never use any hand tools to screw the air tank into the bottom ASA. 4. Attach a paintball hopper/ loader into the marker’s feedneck. 5. Pump the handle back and pull it forward to it’s starting position. 6. Remove the barrel blocking device and disengage the safe mode. CAUTION: Now the marker is LIVE, pulling the trigger will fire a paintball. Only test your marker in a safe direction or on the paintball field. 7. Push the trigger’s safety switch from right to left. The marker’s is now ready to fire.
• Always keep the marker in Safe mode until ready for use.
8. Check marker’s velocity FPS (Feet Per Second). Turning the velocity adjuster (VA01) clockwise will increase the velocity. Counterclockwise will decrease the velocity.
• Fire only 0.68 caliber paintballs with this marker. • Always make sure the bolt is in the un-cocked position when marker is not in use.
GETTING THE MARKER READY FOR STORAGE
• Any modifications or tampering of original factory parts will cause all warranties and liabilities from Azodin. • This owner’s manual should always accompany this marker for reference and in the event of resale and new ownership.
1. Push the tirgger’s safety switch from left to right. This will engage the safety and not allow the trigger to fire the marker. CO2 or HPA/ N2 Air tanks will have enough force to fly off and cause serious injury or death if the valve unscrews from the tank head. Look at the valve when removing the tank from the marker's Bottom ASA (KBA2). Make sure that the valve is turning with the tank instead of staying with the marker. STOP IMMEDIATELY if valve starts to unscrew from the tank itself. Screw the tank back onto the marker's Bottom ASA adapter and contact a qualified airsmith for further assistance.
2. After playing, empty out all the paintballs from the hopper. Then detach the hopper from the marker. CAUTION: There may be 1-2 paintballs in the breach area; To remove the paintballs you can turn the marker upside down or fire it into a safe area. 3. Unscrew the barrel from the marker. 4. You may now store the marker.
VELOCITY ADJUSTMENTS
ASSEMBLY AND CLEANING THE MARKER PULL PUMP BOLT PIN (PBP3)
WARNING: Do not turn the velocity adjust clockwie more than 6 turns. This may strip the threads on the Velocity Adjuster and End Cap. To increase your velocity FPS (Feet Per Second), use the allen wrench to turn the Velocity Adjuster (VA01) clockwise. To decrease your velocity FPS (Feet Per Second), use the allen wrench to turn the Velocity Adjuster (VA01) counterclockwise.
WARNING: Never remove the internals of the marker while the tank is attached to the marker. Always remove the loader, the air tank, and all paintballs from the marker before disassembly.
HOW TO CLEANING AND DISASSEMBLE REAR INTERNALS 1. Pull the Top Cocking Knob (PBP3) up. 2. Pull the Bolt (PB03) out the back of the Pump Slide (PA02). 3. Turn the End Cap (EC02) counterclockwise until it is free of the marker’s body. 4. Remove the Pump Striker Spring (PSS2) from the Marker. 5. Tilt the marker backwards and slide the Pump Striker (PS02) out of the marker. It may get caught on the trigger sear. If this happens, pull the striker out using a finger. You may also push the striker out from the top of the marker with an allen key. 6. Use a squeegee or barrel swab to clean the inside of the body. Use a towel or rag to remove any paint or debris from the Pump Bolt (PB03). 7. Apply a thin layer of Azodin lube to the Bolt Orings (RO15) and the Pump Striker (PS02). HOW TO REASSEMBLE…
The first 1066 words, extracted from the PDF. Read the full manual above, or download it.