!WARNING!
GETTING STARTED
• This Paintball Marker is NOT A TOY. Misuse can cause serious injury or death.
• Tank valves must be installed or removed by qualified personnel.
1. First, place the BARREL BLOCKING DEVICE over the barrel.
• All tanks must be retested before the expiration date.
• Recommend 18 years or older to purchase this product. Person under 18 must have adult supervision.
• Improper use, filling, storage of this air tank may cause death, serious injury and property damage.
• Read this manual, understand and follow the manual instructions for using this product.
• Air tanks must be filled only by properly trained personnel.
2. Always point your marker at a “SAFE” direction before use. To use, push the safety button from the “PUSH SAFE” side of the grip frame. Doing this will put the marker in a lock safe mode. To unlock the safe mode, point the marker in the safe direction, and push the safety button towards the “PUSH SAFE” side of the grip frame.
IMPORTANT SAFETY INSTRUCTION AND GUIDELINS
• Eye and face protection specially designed for paintball use, must be worn by user and persons within range at all times. • Treat all paintball markers as if it were loaded and able to fire. • Never look down the barrel or breech area of a marker. • Always use barrel blocking device when the marker is not in use. • Always chronograph this marker before playing paintball. • Never shoot any marker at velocities exceeds 300 FPS (Feet Per Second), or velocities which is greater than local fields or national laws allow.
IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES
• Do not over pressurize. Do not expose pressurized tanks to temperatures in excess of 130F° degrees (54°C). • Do not expose tanks to corrosive materials and do not clean with caustic cleaners. • Do not alter tanks in any way. • Tanks heated up to a temperature of 250F° degrees (54°C) or more must be condemned or re-qualified. • Keep air tanks out of reach of children. • The valve should NEVER detach from the tank canister. Should this occur, seek assistance from a qualified airsmith immediately. • Air tanks are use for the sport of paintball only.
• Ensure all air lines and fittings are tightened and secured before installing the air tanks.
3. Firmly screw in the CO2/ HPA/ N2 air tank to the bottom ASA (A091). Tighten the air tank clockwise all the way in the marker’s bottom ASA. CAUTION: Never use any hand tool to screw air tank to the bottom ASA. 4. Attach a paintball hopper/ loader to the marker’s feed neck. 5. Remove the barrel blocking device and unlock the safe mode. CAUTION: Now the marker is LIVE, pulling the trigger will fire a paintball. Only test your marker at the safe direction or in a proper organized paintball field. 6. Check marker’s velocity FPS (Feet Per Second). Turning the velocity adjuster (P023) clockwise will increase the velocity. Counterclockwise will decrease the velocity. 7. After playing, take out all paintballs from the hopper. Then detach the hopper from the marker. CAUTION: There may be 1-2 paintballs in the breach area; take a couple more shots in a safe direction to make sure the marker is empty of paintballs.
• Do not shoot at people, animals, houses, cars or anything is not related to the sport of paintball. • Always keep the marker in Safe mode until ready for use.
8. Place the barrel blocking device over the barrel and push the safety button in the safe mode.
• Fire only 0.68 caliber paintballs with this marker.
9. Unscrew the CO2/ HPA/ N2 air tanks from the marker’s bottom ASA. CAUTION: Never use any hand tool to screw air tanks to the bottom ASA.
• Always make sure the bolt is in the un-cocked position when marker is not in use. • Any modifications or tampering of original factory parts will cause all warranties and liabilities from Azodin Paintball. • This owner’s manual should always accompany this marker for reference and in the event of resale and new ownership.
CO2 or HPA/ N2 Air tanks will have enough force to fly off and cause serious injury or death if the valve unscrews from the tank head. Look at the valve when removing the tank from the marker’s Bottom ASA (A091). Make sure that the valve is turning with the tank instead of staying with the marker. STOP IMMEDIATELY if valve starts to unscrew from the tank itself. Screw the tank back onto the marker’s Bottom ASA adapter and contact a qualified airsmith for further assistance.
10. Store the marker in a paintball gear bag or in a safe place.
VELOCITY ADJUSTMENTS (INCREASE & DECREASE)
REGULATOR ADJUSTMENT (INCREASE & DECREASE AIR PRESSURE)
ZERO SYSTEM
INSTRUCTION AND ADJUSTMENT
WARNING: Never remove the internal of the mark while the air tank is attached with the marker. FOR CO2 OPERATION: NOTE: KAOS-D is optimized for use with HPA, in order to optimize the KAOS-D for CO2 use, please follow the instructions below. 1. Insert 3mm allen wrench into ZeRO Adjustment Screw (Z031). Turn clockwise all the way into the ZeRO housing (Z041). 2. To optimize the velocity, mark sure the rear velocity adjustment is backed all the way out. Adjust the lnline Regulator (refer to Regulator Adjustment) until the marker is shooting at 250 feet per second over a chronograph. 3. To fine-turn the marker velocity follow the direction on page 9 (refer to Velocity Adjustment) FOR HPA OPERATION: NOTE: KAOS-D is optimized for HPA ues out of the box. Follow the instructions below only after you have used the CO2 setting and would like to reconfigure for HPA use. 1. Insert 3mm allen wrench into the ZeRO Adjustment Screw (Z031). Turn counter-clockwise until parallel with ZeRO Housing (Z041) then turn two turns in clockwise. To increase your velocity FPS (Feet Per Second), use the allen wrench to turn the Velocity adjuster (P023) clockwise.
To increase the input pressure use the allen wrench to turn the Regulator Adjustment Screw (S032) counterclockwise.
To decrease your velocity FPS (Feet Per Second), use the allen wrench to turn the Velocity adjuster counterclockwise.
The first 1040 words, extracted from the PDF. Read the full manual above, or download it.