!WARNING!
• This Paintball Marker is NOT A TOY. Misuse can cause serious injury or death.
• Tank valves must be installed or removed by qualified personnel.
1. First, place the BARREL BLOCKING DEVICE over the barrel.
• All tanks must be retested before the expiration date.
2. Always point your marker at a “SAFE” direction before use. To use, push the safety button from the “PUSH SAFE” side of the grip frame. Doing this will put the marker in a lock safe mode. To unlock the safe mode, point the marker in the safe direction, and push the safety button towards the “PUSH SAFE” side of the grip frame.
IMPORTANT SAFETY INSTRUCTION AND GUIDELINS
• Recommend 18 years or older to purchase this product. Person under 18 must have adult supervision. • Read this manual, understand and follow the manual instructions for using this product.
IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES
• Improper use, filling, storage of this air tank may cause death, serious injury and property damage. • Air tanks must be filled only by properly trained personnel.
• Eye and face protection specially designed for paintball use, must be worn by user and persons within range at all times.
• Do not over pressurize. Do not expose pressurized tanks to temperatures in excess of 130F° degrees (54°C).
• Treat all paintball markers as if it were loaded and able to fire.
• Do not expose tanks to corrosive materials and do not clean with caustic cleaners.
• Never look down the barrel or breech area of a marker. • Always use barrel blocking device when the marker is not in use. • Always chronograph this marker before playing paintball. • Never shoot any marker at velocities exceeds 300 FPS (Feet Per Second), or velocities which is greater than local fields or national laws allow. • Ensure all air lines and fittings are tightened and secured before installing the air tanks.
• Do not alter tanks in any way. • Tanks heated up to a temperature of 250F° degrees (54°C) or more must be condemned or re-qualified. • Keep air tanks out of reach of children. • The valve should NEVER detach from the tank canister. Should this occur, seek assistance from a qualified airsmith immediately. • Air tanks are use for the sport of paintball only.
• Do not shoot at people, animals, houses, cars or anything is not related to the sport of paintball.
GETTING STARTED
3. Firmly screw in the CO2/ HPA/ N2 air tank to the bottom ASA (A021). Tighten the air tank clockwise all the way in the marker’s bottom ASA. CAUTION: Never use any hand tool to screw air tank to the bottom ASA. 4. Attach a paintball hopper/ loader to the marker’s feed neck. 5. Remove the barrel blocking device and unlock the safe mode. CAUTION: Now the marker is LIVE, pulling the trigger will fire a paintball. Only test your marker at the safe direction or in a proper organized paintball field. 6. Check marker’s velocity FPS (Feet Per Second). Turning the velocity adjuster (P023) clockwise will increase the velocity. Counterclockwise will decrease the velocity.
• Fire only 0.68 caliber paintballs with this marker.
7. After playing, take out all paintballs from the hopper. Then detach the hopper from the marker. CAUTION: There may be 1-2 paintballs in the breach area; take a couple more shots in a safe direction to make sure the marker is empty of paintballs.
• Always make sure the bolt is in the un-cocked position when marker is not in use.
8. Place the barrel blocking device over the barrel and push the safety button in the safe mode.
• Any modifications or tampering of original factory parts will cause all warranties and liabilities from Azodin Paintball.
9. Unscrew the CO2/ HPA/ N2 air tanks from the marker’s bottom ASA. CAUTION: Never use any hand tool to screw air tanks to the bottom ASA.
• Always keep the marker in Safe mode until ready for use.
• This owner’s manual should always accompany this marker for reference and in the event of resale and new ownership.
10. Store the marker in a paintball gear bag or in a safe place. CO2 or HPA/ N2 Air tanks will have enough force to fly off and cause serious injury or death if the valve unscrews from the tank head. Look at the valve when removing the tank from the marker’s Bottom ASA (A021). Make sure that the valve is turning with the tank instead of staying with the marker. STOP IMMEDIATELY if valve starts to unscrew from the tank itself. Screw the tank back onto the marker’s Bottom ASA adapter and contact a qualified airsmith for further assistance.
VELOCITY ADJUSTMENTS (INCREASE & DECREASE)
ASSEMBLY AND CLEANING
CLEANING AND DISASSEMBLE REAR INTERNALS 1. Lift upward on the Top Cocking Knob at the rear of Delrin Bolt. This will let the Delrin Bolt (P041) slide out from the rear of the receiver. 2. Turn the End Cap (A051) counterclockwise. This will let the End Cap (A051) and the marker’s internals to slide out from the rear of the receiver. Remember to place the marker in the de-cock position and place light pressure behind the End Cap during the removal of the End Cap, this way will prevent the internals to spring out. 3. Slide the Feather Striker (P021) out of the rear of the receiver. 4. Once all the internal parts are removed, use a squeegee to clean the inside of the receiver and use a towel to clean the dirt or paint of Delrin bolt. Apply some paintball gun oil on the Striker O-Ring regularly. REASSEMBLE REAR INTERNALS 1. Insert the Feather Striker (P021) thru the rear of the receiver with the O-Ring facing towards the front of the marker and with the hole on the Feather Striker facing upright. While inserting the Feather Striker, apply pressure behind the Feather Striker and at the same time pull the Trigger to let Feather Striker enter the rear chamber of the receiver.
To increase your velocity FPS (Feet Per Second), use the allen wrench to turn the Velocity adjuster (P023) clockwise. To decrease your velocity FPS (Feet Per Second), use the allen wrench to turn the Velocity adjuster (P023) anticlockwise.
The first 1053 words, extracted from the PDF. Read the full manual above, or download it.