! WARNING !
IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES
IMPORTANT SAFETY INSTRUCTION AND GUIDELINES
• This Paintball Marker is NOT A TOY. Misuse can cause serious injury or death.
• Tank Regulators must be installed or removed by qualified personnel.
• It is recommended that a person be 18 years or older to purchase this product.
• All tanks must be retested before the expiration date.
Person under the age of 18 must have adult supervision or consent. • Please read the manual and follow the instructions for using this product.
property damage.
• Eye and face protection specially designed for paintball, must be worn by users and persons within range at all times.
• Do not over pressurize. Do not expose pressurized tanks to temperatures in excess of 130F° degrees (54°C).
• Never look down the barrel or breech area of a marker.
• Do not expose tanks to corrosive materials and do not clean with caustic cleaners.
• Always use barrel blocking device when the marker is not in use.
• Do not alter tanks in any way.
• Always chronograph this marker before playing paintball.
• Tanks heated up to a temperature of 250F° degrees (54°C) or more must be
• Never shoot any marker at velocities exceeds 300 FPS (Feet Per Second), or .
• Keep air tanks out of reach of children.
• Always chronograph the marker before playing.
• The Regulator should NEVER detach from the tank canister. Should this occur, seek tanks.
• Do not shoot at people, animals, houses, cars or objects that are not related to the sport
• Air tanks are to be used for the sport of paintball.
of paintball. • Always keep the marker in Safe mode until ready for use. • Only use 0.68 caliber paintballs with this marker. • Always make sure the bolt is in the un-cocked position when marker is not in use. will void all warranties and liabilities from Azodin. • This owner’s manual should always accompany this marker for reference and should be presented to the new owner if there is transfer of ownership. HPA / N2 Air tanks have enough force to become a projectile and cause serious injury or death if the regulator unscrews from the tank head. When removing the tank from the marker, please check to see if the regulator is unscrewing from the tank and staying on the On/Off ASA. If the two pieces are separating contact a qualified airsmith for further assistance. The regulator should unscrew from the marker’s On/Off ASA (A091) when the tank is turned. Both the regulator and tank should disconnect from the marker at the same time.
GETTING STARTED
VELOCITY ADJUSTMENT COUNTERCLOCKWISE DECREASE VELOCITY
1. First, place the BARREL BLOCKING DEVICE over the barrel. 2. Always point your marker at a “SAFE” direction before use. To use, push the safety button from the “PUSH SAFE” side of the grip frame. Doing this will put the marker in a lock safe mode. To unlock the safe mode, point the marker in the safe direction, and push the safety button towards the “PUSH SAFE” side of the grip frame.
CLOCKWISE INCREASE VELOCITY
3. Firmly screw in the HPA / N2 air tank to the On/Off Bottom ASA (A091). Tighten the air tank clockwise all the way in the marker’s bottom ASA. CAUTION: Never use any hand tool to screw air tank to the bottom ASA. 4. Attach a paintball hopper/ loader to the marker’s feed neck. 5. Turn the On/off Bottom ASA Cap (A092) clockwise to let air go into the marker. 6. Remove the barrel blocking device and unlock the safe mode. CAUTION: Now the marker is LIVE, pulling the trigger will fire a paintball. Only test your marker at the safe direction or in a proper organized paintball field. 7. Check marker’s velocity FPS (Feet Per Second). Turning the Velocity Adjuster (P023) clockwise will increase the velocity. Counterclockwise will decrease the velocity. 8. After playing, take out all paintballs from the hopper. Then detach the hopper from the marker. CAUTION: There may be 1-2 paintballs in the breach area; take a couple more shots in a safe direction to make sure the marker is empty of paintballs.
To increase your velocity FPS (Feet Per Second), use the allen wrench to turn the Velocity Adjuster (P023) clockwise. To decrease your velocity FPS (Feet Per Second), use the allen wrench to turn the Velocity Adjuster (P023) counterclockwise.
REGULATOR ADJUSTMENT CLOCKWISE DECREASE PRESSURE AND VELOCITY
9. Place the barrel blocking device over the barrel and push the safety button in the safe mode. 10. Counterclockwise the On/off Bottom ASA Cap (A092) to release air pressure in the marker. 11. Unscrew the HPA / N2 air tanks from the marker’s bottom ASA. CAUTION: Never use any hand tool to screw air tanks to the bottom ASA. 12. Store the marker in a paintball bag or in a safe place.
COUNTERCLOCKWISE INCREASE PRESSURE AND VELOCITY To increase the input pressure, use the allen wrench to turn the Rock Steady Seat (P086) counterclockwise. To decrease the input pressure, use the allen wrench to turn the Rock Steady Seat (P086) clockwise. NOTE: Contact [email protected] for more information on tuning the KD-II. Always use Velocity Adjuster (P023) to increse velocity first then increase input pressure. RESET THE REGULATOR TO FACTORY PRESSURE 1. Please remove air source and clear the air stored in the marker. 2. Turn the Rocksteady Seat clockwise till it stops (DO NOT FORCE IT PAST THE STOP POINT). 3. Turn the RockSteady Seat counterclockwise two and half turns.
ZeRO-D SYSTEM The ZeRO-D is a revolutionary system that combines the Feather Striker and Mass Flow Valve to achieve a low operating pressure. This gives the KD-II an unparalled shooting profile for a Stacked Tube Blow Back (STBB) Marker.
ASSEMBLY AND CLEANING THE MARKER Turn the End Cap Counterclockwise to access the internals PULL THE TOP COCKING KNOB 1
The ZeRO-D System is designed to reduce the mechanical recoil of the marker by balancing the output pressure of the inline regulator with the timing of the valve.
ZeRO-D SYSTEM ADJUSTMENT 1: Insert 3 mm allen wrench into the ZeRO-D Adjustment Screw (Z031).
The first 1035 words, extracted from the PDF. Read the full manual above, or download it.