!WARNING!
GETTING STARTED
• This Paintball Marker is NOT A TOY. Misuse can cause serious
• Tank valves must be installed or removed by qualified personnel.
1. First, place the BARREL BLOCKING DEVICE over the barrel.
• All tanks must be retested before the expiration date.
2. Always point the marker in a “SAFE” direction when powering it on. To turn the marker on, press the top button once. The marker will show a Red Light on the upper LED indicating it is in Safe Mode. The marker will not fire when the trigger is pulled. In order to remove the Safe Mode, please press the bottom button once. The upper Led will change to a Green Light (Eyes On) and the marker is ready to fire. * For a detailed breakdown of the electronics and its operation, please refer to page (7)
IMPORTANT SAFETY INSTRUCTION AND GUIDELINS
injury or death.
• Recommend 18 years or older to purchase this product. Person under 18 must have adult supervision. • Read this manual, understand and follow the manual instructions for using this product. • Eye and face protection specially designed for paintball use, must be worn by user and persons within range at all times. • Treat all paintball markers as if it were loaded and able to fire. • Never look down the barrel or breech area of a marker. • Always use barrel blocking device when the marker is not in use. • Always chronograph this marker before playing paintball. • Never shoot any marker at velocities exceeds 300 FPS (Feet Per Second), or velocities which is greater than local fields or national laws allow. • Ensure all air lines and fittings are tightened and secured before installing the air tanks.
IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES
• Improper use, filling, storage of this air tank may cause death, serious injury and property damage. • Air tanks must be filled only by properly trained personnel. • Do not over pressurize. Do not expose pressurized tanks to temperatures in excess of 130F° degrees (54°C). • Do not expose tanks to corrosive materials and do not clean with caustic cleaners. • Do not alter tanks in any way. • Tanks heated up to a temperature of 250F° degrees (54°C) or more must be condemned or re-qualified. • Keep air tanks out of reach of children. • The valve should NEVER detach from the tank canister. Should this occur, seek assistance from a qualified airsmith immediately. • Air tanks are use for the sport of paintball only.
• Do not shoot at people, animals, houses, cars or anything is not related to the sport of paintball.
4. Attach a paintball hopper/ loader to the marker’s feed neck. 5. Remove the barrel blocking device and unlock the safe mode. CAUTION: The marker is now LIVE, pulling the trigger will fire a paintball. Only test the marker at a proper paintball field or in a safe direction where persons are not present. 6. Check the marker’s velocity using a chronograph. Turning the Velocity Adjuster (P023) clockwise will increase the velocity. Turning it counterclockwise will decrease the velocity.
• Always keep the marker in Safe mode until ready for use.
7. After playing, remove all paintballs from the hopper and detach the hopper from the marker. CAUTION: There may be 1-2 paintballs in the breach area. Shoot the marker until it is clear of paintballs or turn the marker upside-down to remove the paintballs.
• Fire only 0.68 caliber paintballs with this marker. • Always make sure the bolt is in the un-cocked position when marker is not in use. • Any modifications or tampering of original factory parts will cause all warranties and liabilities from Azodin. • This owner’s manual should always accompany this marker for reference and in the event of resale and new ownership.
3. Firmly screw in the CO2/ HPA/ N2 air tank onto the marker’s ASA. Turn the air tank all the way in by turning it clockwise. CAUTION: Never use any hand tool to screw air tank to the bottom ASA.
STOP IMMEDIATELY
When removing the air tank from the marker, check to see if the regulator / bonnet is unscrewing from the tank. If so, stop unscrewing the air tank from the marker and contact a qualified airsmith for further assistance. Air tanks should unscrew from the marker’s ASA when the tank is turned counterclockwise. The regulator / bonnet should stay on the tank during the removal process. HPA / N2 air tanks store high pressure air. If this air is released without using a regulator, it may cause serious injury or death.
8. Place the barrel blocking device over the barrel and turn the marker off. To turn the marker off, press and hold the top button until the lights disappear. 9. Unscrew the CO2/ HPA/ N2 air tanks from the marker’s bottom ASA. CAUTION: Never use any hand tool to screw air tanks to the bottom ASA. 10. Store the marker in a paintball bag or in a safe place.
USING THE ZEN BOARD TURNING ON THE BOARD: Press the Top Button once to turn on the board. The upper LED will show a Red Light (Safe Mode) and the Lower LED will show a Green Light (Default setting is Semi-Auto mode). If the Upper LED is flashing Red, the battery has a low charge and needs to be replaced. The Battery power status can be verified by press the Top Button once more.
LED COLORS UPPER LED RED = SAFF MODE GREEN = EYES ON ORANGE = EYES OFF (10.5 BPS) FLASH RED = LOW BATTERY POWER STATUS FALSH GREEN = EYES MALFUNCTION (8 BPS)
LOWER LED GREEN = SEMI - AUTO (20 BPS SS=0) DARK BLUE = PSP RAMP (10.2 BPS SS=3) PURPLE = MILLENIUM RAMP (15 BPS SS=0) SAFE MODE: After turning on the board, press the Lower LIGHT BLUE = CFOA SEMI (10.2 BPS SS=3) Button once to turn off the Safe Mode. The Upper LED FALSH GREEN = PROGRAMMING MODE will show a Green Light to indicate the Eyes are on. Press the Lower Button again to turn on the Safe Mode. The NOTE: Safety Shot (SS) defines the number of consecutive Upper LED will revert back to the Red Light to indicate trigger pulls that must be achieved in order to activate the fire mode. the Safe Mode is on. EYES ON/OFF: When the Safety is off and Upper LED will show a Green Light…
The first 1088 words, extracted from the PDF. Read the full manual above, or download it.