JT SPORTS ER4 PISTOL OPERATORS MANUAL The JT Sports ER4 Pistol is non-serviceable and any attempts to repair or replace parts of the marker will void the warranty. For manuals and warranty details, go to: paintballsolutions.com. For manuals in other languages, (where applicable), go to: paintballsolutions.com
WARNING THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE PROTECTION DESIGNED SPECIFICALLY FOR PAINTBALL MUST BE WORN BY THE USER AND PERSONS WITHIN RANGE. WARNING: This product contains one or more chemicals that are known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. You must be at least 18 years of age to purchase this product. This product may be mistaken for a firearm by law enforcement officers or others. Altering the color of the product or brandishing the product in public may be considered a crime. Safe Marker Handling CAUTION Never carry your marker uncased when not on a playing field. The non-playing public and law enforcement personnel may not be able to distinguish between a paintball marker and firearm. For your own safety and to protect the image of the sport, always carry your marker in a suitable marker case or bag. Safety and safe marker handling are the most important aspects of paintball sports. Please practice each of the following steps with an unloaded marker before attempting to operate your marker with an air source and paintballs. • Every person within range must wear eye, face and ear protection designed specifically to stop paintballs and meeting ASTM standard F1776. • Treat every marker as if it were loaded. • Never look down the barrel of a paintball marker. • Do not install an air source or load paintballs into your marker until you have completely read and understood this manual and feel completely confident with your ability to handle your marker safely. • Keep the marker’s Safety “ON” until ready to shoot. • Keep your finger out of the trigger guard and away from the trigger until you are ready to shoot. • Keep the barrel blocking device in/on the markers barrel when not shooting. • Store the marker unloaded and degassed in a secure place. • Follow warnings listed on the air source for handling and storage. • Do not shoot at fragile objects such as windows. • Remember that the ultimate safety device is you, the operator. • Never point the marker at anything you do not wish to shoot. • After removing propellant point marker in safe direction and discharge until marker is degassed. • Always measure your marker’s velocity before playing paintball and never shoot at velovities in excess of 300 ft/s (91.44 m/s)
WARNING EYE PROTECTIVE DEVICES DESIGNED SPECIFICALLY FOR PAINTBALL USE MUST BE WORN BY THE OPERATOR AND ANYONE WITHIN RANGE (FIG 1). Mechanical Safety The Safety is a small mechanical push button above the trigger. When the Safety is “ON”, the red on the left side of the Safety will be not be visible and the marker will not fire. When the Safety is “OFF”, the red on the left side of the Safety will be visible. The Safety should be on at all times when the marker is not being fired (fig. 2). Barrel Blocking Device The barrel blocking device should be installed at all times when the marker is not being fired, along with the Safety being in the “ON” position, red not visible. To install Barrel blocking device, place plug into barrel end and push firmly until plug is fully into marker barrel (fig. 3). Installing 12 gram CO2 Cylinder Consult the dealer from whom you purchased your marker, or a recognized and competent air smith, for instruction in the safe handling of 12 gram CO2 cylinders before purchasing or installing one into your marker.
• Install the 12 gram cylinder, pressurizing the marker. • Install loader onto the marker and load paintballs. • Remove the barrel-blocking device. • Aim the marker in a safe direction. • Set the Safety to the “OFF” position. • Aim the marker at the target. • Place your finger on the trigger. • Pull the trigger with a smooth squeezing motion.
Cleaning Once your marker is unloaded and the 12 gram cylinder is removed, you can use a damp cloth to wipe off paint, dirt and debris from the outside of your marker. Do not use any petroleum based or aerosol products on your marker. Petroleum based and aerosol products can damage your markers o-rings and can damage the markers plastic components. Clean the barrel of the marker by pulling a squeegee thru the marker. When you are finished using your marker it is important that you prepare it for storage. This will not only serve to increase the life of the marker, but will assure optimum performance on your next outing. • The marker must be clear of all paint and air cylinders when not being used. • Be sure to have marker’s Safety is “ON” when not in use. • Make sure a barrel blocking device is in place. • Store your marker and air cylinders in a cool dry place. • Keep your marker away from unsupervised children. • Your marker must be free of all paint and CO2 while being transported to and from the playing field. • Observe and obey all local, state and federal laws concerning the transportation of paintball markers. • Observe and obey all local, state and federal laws concerning the transportation of paintball markers. For information concerning any of the laws in your area, contact your local law enforcement. • Always store the marker in a secure location when not in use so as to prevent access by unauthorized persons. WARRANTY ORIGINAL SALES PURCHASE RECEIPT OR PACKING SLIP Save your original sales purchase receipt or packing slip. JT Sports takes pride in manufacturing high quality paintball products that will provide you with many years of trouble free enjoyment. Should you experience any difficulty in operating the JT Sports ER4 pistol paintball marker, please contact Paintball Solutions at 1.800.220.3222. WARRANTY REPAIR RETURN PROCEDURE A returned product must be accompanied by a Return…
The first 1031 words, extracted from the PDF. Read the full manual above, or download it.