Welcome to the JT® team and thank you for purchasing this high quality JT Excellerator 3.5 paintball marker. We at JT® stand committed to providing you with the best product and service available. Your new marker is designed and manufactured to provide ease of maintenance with trouble free performance. We ask that you read this manual to obtain the maximum enjoyment of your purchase. Call 1-888-458-4327 or visit our web site at www.jtusa.com if you should need an Illustrated Parts List and Troubleshooting guides. For: EI, UK, BE, LUX, FR, ES, POR contact:
Sport Attitude
Z.I. Avenue Rhin et Danube 72201 La Fleche Cedex, France Tel 33 02 4348 5012 Fax 33 02 4348 5005
.68 CALIBER SEMI-AUTOMATIC PAINTBALL MARKER
EXCELLERATOR 3.5 RENTAL
For SE, EST, LAT, LITH, PL, DK, NL, DE, CZ, CH, A, HUN contact:
CMC Maxs-Sport
Am Wartfeld 1 61169 Friedberg, Germany Tel 49 6031 770333 Fax 49 6031 770334
JT USA® Inc.
515 Main Street, Chula Vista, CA 91911 U.S.A. 1-888-458-4327 Fax (619)205-5097 www.jtusa.com
OWNER’S MANUAL Contains: • Safety Information • Warranty Information • Operating Instructions
• Annotated Diagram • Trouble Shooting Guide
This safety alert symbol indicates important safety messages in this manual. When you see this symbol, be alert to the possibility of personal injury and carefully read the message that follows. WARNING: THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE PROTECTION DESIGNED FOR PAINTBALL USE MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. RECOMMEND AT LEAST 18 YEARS OLD TO PURCHASE, 14 YEARS OLD TO USE WITH ADULT SUPERVISION, OR 10 YEARS OLD TO USE ON PAINTBALL FIELDS MEETING ASTM-STANDARD F1777-97. READ OPERATION MANUAL BEFORE USING. WARNING: NEVER SHOOT AT ANYONE WITHOUT PROPER PROTECTIVE EQUIPMENT FOR EYES, EARS, THROAT AND HEAD, WHICH MUST BE WORN AT ALL TIMES. EYE PROTECTION MUST BE DESIGNED SPECIFICALLY FOR PAINTBALL USE. FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS MAY RESULT IN BODILY INJURY INCLUDING BLINDNESS AND DEAFNESS.
RULES OF SAFE PAINTBALL MARKER HANDLING
1. Always wear proper eye, face and ear protection designed especially to stop paintballs. 2. Never shoot a person who is not wearing proper protection. 3. Treat every paintball marker as if it were loaded. 4. Never look down the barrel of the marker. 5. Never point the paintball marker at anything you don’t wish to shoot. 6. Keep the paintball marker on safe until ready to shoot. 7. Keep the barrel plug in the paintball marker’s muzzle when not shooting. 8. Always remove gas source before disassembly. 9. Store the paintball marker unloaded and degassed in a locked place. 10. Follow warnings listed on gas source for handling and storage. 11. Never use anything other than .68 caliber paintballs. 12. Do not shoot fragile objects such as windows. 13. Paintballs may cause staining of some porous surfaces such as brick, stucco and wood. 14. Always measure velocity before playing paintball. 15. Never shoot at velocities in excess of 300 feet per second. Use a chronograph to insure the marker’s velocity is set accurately. Recommend the Viewloader® On-Barrel Chronograph #7815 to verify velocity.
Use a barrel squeegee to clean broken paintballs from your marker’s barrel. We recommend the JT® Battle Swab Squeegee #8401.
OPERATING INSTRUCTIONS WARNING: Be sure the paintball marker is always pointed in a safe direction. Read the following operating instructions and WITHOUT LOADING ANY PAINTBALLS proceed several times through the operating steps with your paintball marker (dry fire the paintball marker at a safe target) so that you will be able to operate the marker properly and safely. STEP 1. EYE PROTECTION: Make sure everyone within range (200 yards) is properly protected from paintball impacts. STEP 2. PUT ON “SAFE”. Push safety from left to right; no red band showing. Make sure barrel plug is placed securely in barrel of marker. STEP 3. ENGAGE: Cock marker by pulling cocking pin fully back until locked in rear position. The Excellerator™ is a semi-automatic marker, which will re-cock itself after firing when working properly. STEP 4. ATTACH GAS SOURCE: Marker can be used with a Brass Eagle® constant air refillable cylinder (not included in all packaging). You should expect better gas efficiency with a larger refillable cylinder. (RECOMMEND Brass Eagle® 9oz. refillable cylinder. Item #1471.) NOTE: Add 3 drops of mineral oil to the ASA adapter prior to attaching the refillable cylinder. Check the website at: www.jtusa.com for approved lubricants. STEP 5. LOAD PAINTBALLS: A) Insert loader (not included with all markers) into ball feed port. Grip loader from the top. Insert loader feed neck into ball feed port on the marker. Twist and push firmly in a clockwise direction. NOTE: The loader to ball feed port fit is purposely tight. (RECOMMEND Viewloader® QuantumTM, eVLution IITM or RevolutionTM electronic loader) B) Pour paintballs into loader. NOTE: Paintballs are gravity fed from loader to the marker each time the trigger is pulled. Too rapid a rate of fire, broken balls or too many balls in loader may cause subsequent balls to break and will adversely affect the paintball marker’s accuracy. Use a squeegee to clean inside the paintball marker’s barrel. (RECOMMEND Brass Eagle®, Viewloader® or JT® brand .68 caliber paintballs.) Paintballs should be stored in a cool, dry place in sealed plastic bags. Do not subject to freezing, excessive heat, humidity or store in direct sunlight. These conditions may cause ball breakage and/or poor feeding. STEP 6. Remove barrel plug and take off safe by pressing safety from right side of paintball marker until red band is showing. STEP 7. VERIFY VELOCITY: Verify that the paintball marker’s velocity is below 300 feet per second or less if required by playing field. Velocity should be measured with a chronograph prior to playing paintball. Velocity may be adjusted by turning the velocity adjustment screw. (See Fig. A) Using a 1/8” allen key (included) turn the screw clockwise…
The first 978 words, extracted from the PDF. Read the full manual above, or download it.