Spyder Victor 2 Manual - English

Mail to:

• The valve should NEVER be detached from the canister. Should this occur, please seek assistance from a trained airsmith immediately.

• Keep the paintball marker on safe until ready to shoot.

• Keep cylinder out of reach of children.

• Never look down the barrel of the marker.

LIMITED WARRANTY.

• Cylinders heated to a temperature of 250 degrees F or more must be condemned or requalified in accordance with test defined in CFR-49.

• Treat every paintball marker as if it were loaded.

RECEIPT, WITHIN 15 DAYS OF PURCHASE SO THAT WE MAY VALIDATE YOUR ONE YEAR

• Do not alter this cylinder in any way.

• Never shoot a person who is not wearing proper protection.

PLEASE COMPLETE AND RETURN THIS FORM, ALONG WITH A COPY OF YOUR PURCHASE

• Do not expose cylinder to corrosive materials and do not clean with caustic cleaners.

• Install a barrel plug in the barrel when not actually playing.

• Do not over pressurize. Do not expose pressurized cylinder to temperatures in excess of 130 degrees F.

• Recommend at least 18 years of age to purchase this product.

• This cylinder must be filled only by properly Trained personnel in accordance with CGA Pamphlets P.1 and G-6.3 available from the Compressed Gas Association WWW.CGANET.COM

• Improper use, filling, storage or disposal of this cylinder may result in death, personal injury and property damage.

CAUTION

• This tank is intended for paintball use only.

• Always remove gas source before disassembly.

• Fire only 0.68 caliber paintballs from this product. 36E

• Read this manual and air system warning before using this product. • Transfer this instruction manual upon change of marker ownership.

SPYDER VICTOR II

IMPORTANT

Firing velocity may vary according to altitude and climate conditions.

BEFORE using your marker in play, you must always first perform a “SAFE VELOCITY TEST”. This can only be accomplished by using a testing device called a “Velocity Chronograph” and can be performed by the dealership where you purchased this product or at a local paintball playing field.

Note: This product is intended to be used at a velocity no greater than 300 feet per second (FPS).

Recommended velocity is 280 FPS or less.

This product is NOT intended to be used at any distance less than 25 feet.

This paintball marker may have excess gas after removal of the tank. Please remove all paintballs and discharge the remaining gas safely.

Name of Parts

Barrel Plug

Victor Receiver (green)

Valve body

9" Barrel (silver)

Vertical Adapter (blue)

Valve body screw

Ball Stopper w/ Detent Cover (black)

Vertical Adapter (green)

M5 X 12.5 screw

Direct Feed (green)

Low Pressure Chamber (silver)

Venturi bolt

Direct Feed (blue)

O-ring #015 80D

Striker

M4 X 6 Screw (black)

Valve spring

Striker o-ring

Direct Feed Screw (silver)

Cup seal guide

Barrel o-ring

M5 X 14 Screw w/ washer

Cup seal

Bolt pin

Victor Receiver (blue)

Valve pin

Bolt screw

WARRANTY STATEMENT

Quick Disconnect Pin

Disconnect Lock Pin

Sight Rail Screw

Striker spring

Striker buffer

Striker spring guide

Flat disc

Striker plug (silver)

Velocity Adjust Screw

Deluxe Trigger Frame (blue)

Deluxe Trigger Frame (green)

Rubber Grip Cover (green)

Rubber Grip Cover (blue)

Grip Cover Screw

C/A adapter (green)

C/A adapter (blue)

Nut Screw

Screw 5/32" x 5/8" w/ washer (black)

Screw 5/32" x 7/8" w/ washer (black)

Disconnect Hose

Filter O-ring

Filter

Plastic Washer

Safety button

Male to Male Adapter

Sight Rail (green)

Sight Rail (blue)

Spare Parts Kit

Double Trigger

Trigger Roll Pin

Sear Roll Pin

Secondary Sear Roll Pin

TROUBLESHOOTING

SPYDER VICTOR II OPERATION GUIDE:

Kingman warranties to the original customer purchaser that this product is free from defects in

ONE OR MORE OF THE FOLLOWING MAY CAUSE RECOCKING RELATED PROBLEMS:

material and workmanship under normal use and service for a period of 12 months from the

a. The pressure in the tank is too low or too high.

original date of purchase by the initial owner/purchaser. For warranty to be effective, customer

b. Need lubrication. (S ee OPE R ATION G UIDE in P4)

Kingman Group 14010 Live Oak Avenue Baldwin Park, CA 91706 U.S.A.

Telephone (

Address City Your age

E-mail address

Country Occupation

Product name and model What other brand(s) of markers do you own? Why did you purchase this Kingman marker? Avg # of times you play paintball per month What is the next paintball product you intend to buy? What are your hobbies (other than paintball)?

What are some magazines you like to read?

Have you purchased products from the Internet within the last 6 months? Comments/Suggestions:

To put the marker on “SAFE”, push the safety from the “PUSH SAFE” side of the trigger frame. To disengage the safety, point the marker in safe direction, push in the safety from the “PUSH FIRE” side of the trigger frame.

c. #19A (striker o-ring) is damaged. Replace with new Kingman or Kingman-approved o-ring. (Note: the #19A O-ring c annot be s ubs tituted by a tank o-ring or a #9 o-ring).

must return the enclosed warranty registration card, along with a copy of the purchase receipt, within fifteen days of purchase. Kingman agrees to repair or replace (at its discretion) any product

d. Need to clean barrel and upper chamber or the receiver.

Tighten the air tank until it is snug. If a leak occurs between the air tank and the C/A Adapter, replace the tank o-ring.

within a reasonable period of time. This warranty does not cover o-rings, scratches, nicks,

e. Paintball may be defective (i.e. expired, change shape)

Install a 7/8” elbow with loader into the vertical feed. Fill the loader with .68 caliber paintballs only.