Spyder 2005 Victor Manual - English

SPYDER VICTOR

IMPORTANT

Firing velocity may vary according to altitude and climate conditions.

BEFORE using your marker in play, you must always first perform a “SAFE VELOCITY TEST”. This can only be accomplished by using a testing device called a “Velocity Chronograph” and can be performed by the dealership where you purchased this product or at a local paintball playing field.

Note: This product is intended to be used at a velocity no greater than 300 feet per second (FPS).

Recommended velocity is 280 FPS or less.

This product is NOT intended to be used at any distance less than 25 feet.

This paintball marker may have excess gas after removal of the tank. Please remove all paintballs and discharge the remaining gas safely.

Name of Parts

Sight Rail Screw

Striker spring

Striker buffer

Striker spring guide

Flat disc

Striker plug (silver)

Velocity Adjust Screw

Deluxe Trigger Frame (blue)

Deluxe Trigger Frame (green)

Grip Cover Screw

C/A adapter (green)

C/A adapter (blue)

Nut Screw

Screw 5/32" x 5/8" w/ washer (black)

Screw 5/32" x 7/8" w/ washer (black)

Disconnect Hose

Filter O-ring

Filter

Plastic Washer

Barrel Plug

Victor Receiver (green)

M5 x 12.5 Screw

Safety button

9" Barrel (silver)

Victor Reservoir Plug (silver)

Venturi bolt

Male to Male Adapter

Detent Cover w/ ball bearing & Spring (black)

O-ring #015 80D

Striker

Sight Rail (green)

Direct Feed (green)

Valve spring

Striker o-ring

Sight Rail (blue)

Direct Feed (blue)

Cup seal guide

Barrel o-ring

Spare Parts Kit

M4 X 6 Screw (black)

Cup seal

Bolt pin

Double Trigger

Direct Feed Screw (silver)

Valve pin

Bolt screw

Trigger Roll Pin

M5 X 14 Screw w/ washer

Valve body

Quick Disconnect Pin

Sear Roll Pin

Victor Receiver (blue)

Valve body screw

Disconnect Lock Pin

Secondary Sear Roll Pin

WARRANTY STATEMENT

TROUBLESHOOTING

SPYDER VICTOR OPERATION GUIDE:

Kingman warranties to the original customer purchaser that this product is free from defects in

ONE OR MORE OF THE FOLLOWING MAY CAUSE RECOCKING RELATED PROBLEMS:

material and workmanship under normal use and service for a period of 12 months from the

a. The pressure in the tank is too low or too high.

original date of purchase by the initial owner/purchaser. For warranty to be effective, customer

b. Need lubrication. (S ee OPE R ATION G UIDE in P4)

Kingman Group 14010 Live Oak Avenue

• This tank is intended for paintball use only.

• Always remove gas source before disassembly.

• The valve should NEVER be detached from the canister. Should this occur, please seek assistance from a trained airsmith immediately.

• Keep the paintball marker on safe until ready to shoot.

• Keep cylinder out of reach of children.

• Never look down the barrel of the marker.

• Cylinders heated to a temperature of 250 degrees F or more must be condemned or requalified in accordance with test defined in CFR-49.

• Treat every paintball marker as if it were loaded.

• Do not alter this cylinder in any way.

• Never shoot a person who is not wearing proper protection.

LIMITED WARRANTY.

• Do not expose cylinder to corrosive materials and do not clean with caustic cleaners.

• Install a barrel plug in the barrel when not actually playing.

RECEIPT, WITHIN 15 DAYS OF PURCHASE SO THAT WE MAY VALIDATE YOUR ONE YEAR

PLEASE COMPLETE AND RETURN THIS FORM, ALONG WITH A COPY OF YOUR PURCHASE

• Do not over pressurize. Do not expose pressurized cylinder to temperatures in excess of 130 degrees F.

• Recommend at least 18 years of age to purchase this product.

• This cylinder must be filled only by properly Trained personnel in accordance with CGA Pamphlets P.1 and G-6.3 available from the Compressed Gas Association WWW.CGANET.COM

• Improper use, filling, storage or disposal of this cylinder may result in death, personal injury and property damage.

• BOTTLE MUST BE RETESTED SEE CO2/HP TANK LABEL FOR RETEST DATE!

• This paintball marker is NOT a toy. It can cause serious injury or death.

• VALVES MUST BE INSTALLED OR REMOVED ONLY BY QUALIFIED PERSONNEL.

CAUTION

KINGMAN Warranty Registration

Telephone (

Address City Your age

E-mail address

Country Occupation

Product name and model What other brand(s) of markers do you own? Why did you purchase this Kingman marker? Avg # of times you play paintball per month What is the next paintball product you intend to buy? What are your hobbies (other than paintball)?

What are some magazines you like to read?

Have you purchased products from the Internet within the last 6 months? Comments/Suggestions:

To put the marker on “SAFE”, push the safety from the “PUSH SAFE” side of the trigger frame. To disengage the safety, point the marker in safe direction, push in the safety from the “PUSH FIRE” side of the trigger frame.

must return the enclosed warranty registration card, along with a copy of the purchase receipt,

c. #19A (striker o-ring) is damaged. Replace with new Kingman or Kingman-approved o-ring. (Note: the #19A O-ring c annot be s ubs tituted by a tank o-ring or a #9 o-ring).

within fifteen days of purchase. Kingman agrees to repair or replace (at its discretion) any product

d. Need to clean barrel and upper chamber or the receiver.

Tighten the air tank until it is snug. If a leak occurs between the air tank and the C/A Adapter, replace the tank o-ring.

within a reasonable period of time. This warranty does not cover o-rings, 9.6v rechargeable

e. Paintball may be defective (i.e. expired, change shape) f. #9 (bolt o-ring) is damaged or the o-ring has expanded or swelled. Replace with a new o-ring.

Install a 7/8” elbow with loader into the vertical feed. Fill the loader with .68 caliber paintballs only.