Spyder 2007 Fenix Manual - English

WARNING

• Install a barrel plug in the barrel when not actually playing. • All persons using this product, or within range while this product is being used, must wear eye and face protection specifically designed for paintball. • Never shoot a person who is not wearing proper protection. • Treat every paintball marker as if it were loaded.

• VALVES MUST BE INSTALLED OR REMOVED ONLY BY QUALIFIED PERSONNEL.

• Never look down the barrel of the marker. • Keep the paintball marker on safe until ready to shoot.

• BOTTLE MUST BE RETESTED SEE CO2/HP TANK LABEL FOR RETEST DATE!

• Always remove gas source before disassembly. • Fire only 0.68 caliber paintballs from this product.

• Improper use, filling, storage or disposal of this cylinder may result in death, personal

• Read this manual and air system warning before using this product.

injury and property damage.

• Transfer this instruction manual upon change of marker ownership. • This cylinder must be filled only by properly Trained personnel in accordance with CGA Pamphlets P.1 and G-6.3 available from the Compressed Gas Association www.CGANET.COM

IMPORTANT

• Do not over pressurize. Do not expose pressurized cylinder to temperatures in excess of 130 degrees F.

• Firing velocity may vary according to altitude and climate conditions. • BEFORE using your marker in play, you must always first perform a

• Do not expose cylinder to corrosive materials and do not clean with caustic cleaners.

“SAFE VELOCITY TEST”. This can only be accomplished by using a testing device called a “Velocity Chronograph” and can be performed by the dealership where you

• Do not alter this cylinder in any way.

purchased this product or at a local paintball playing field. • NOTE: This product is intended to be used at a velocity no greater than

• Cylinders heated to a temperature of 250 degrees For more must be condemned or re-

300 feet per second (FPS).

qualified in accordance with test defined in CFR-49.

• Recommended velocity is 280 FPS or less. • This product is NOT intended to be used at any distance less than 25 feet.

• Keep cylinder out of reach of children.

• This paintball marker may have excess gas after removal of the tank. Please remove all paintballs and discharge the remaining gas safely.

• The valve should NEVER be detached from the canister. Should this occur, please seek assistance from a trained airsmith immediately. • This tank is intended for paintball use only.

(Midnight Blue and Cherry Red)

Fenix Venturi Bolt

Touch Switch Roll Pin

Retaining Screw

On/Off Switch with wiring harnesses

Retaining Spring

Battery harness

Retaining Ball

Fenix Circuit Board

Striker bolt

On/Off Screw (M2 x 6 Screw)

Striker O-Ring

Java 9.6v Rechargeable Battery

Barrel O-Ring (Black)

Trigger Sear

Bolt Screw

Coil Set

M4 X 8 Screw w/Washer (Black)

Coil Set Screw

Bolt Plug

Charge Pin

Advanced Quick Release Pin (silver)

Touch Switch

Striker Spring

IPI-Tack Switch

Striker Buffer

Circuit Board Screw

Striker Spring Guide

Tournament Lock Switch

Flat Disc

Trigger

Striker Plug

Trigger Adjust Screw

Tournament Thumb Adjuster

Sear Spring

Lock Screw

Trigger Spring

Deluxe Trigger Frame (blue)

Grip Cover Screw (silver)

SPYDER Fenix Parts List

Secondary Sear Roll Pin

M5 x 12 Screw (silver)

Trigger Roll Pin

Valve Body Screw

Regulator w/ Expansion Chamber (red)

Valve Body

Regulator w/ Expansion Chamber (blue)

Valve Pin

45 Male to Male Adapter

Cup Seal

Fenix Spare Parts Kit

Cup Seal Guide

Striker Knob

Valve Spring

Plastic Washer

O-Ring #015 90D

Disconnect O-Ring #01 1 (Black)

O-Ring #015 80D

Air Filter

Regulator Lock Screw

Filter O-Ring

Low Pressure Chamber (red)

Fenix Disconnect Hose

Low Pressure Chamber (blue)

5/32" X 7/8" Screw (silver)

Vertical Adapter w/ Gauge (red)

5/32" x 5/8" Screw (silver)

Vertical Adapter w/ Gauge (blue)

Regulator Adjust Screw

Receiver (silver)

Drop Forward

M4 x 6 Screw (silver)

C/A Adapter (red)

Vertical Feed Nut

C/A Adapter (blue)

Vertical Feed Screw

Compact Nut Screw

Detent Cover (silver)

16D JE29 JE26 E29F JE28D

Trigger Screw

Direct Feed

Grip Panel (grey)

12" Competition Barrel (red)

Fenix Trigger Guard (silver)

12" Competition Barrel (blue)

Deluxe Trigger Frame (red)

NAME OF PART (S)

Barrel Plug

Spyder Fenix