CO2/HP AIR TANK WARNING 01
SEMI-AUTO
WARNING • VALVES MUST BE INSTALLED OR REMOVED ONLY BY QUALIFIED PERSONNEL.
der spy
• Keep the paintball marker on safe until ready to shoot.
IMPORTANT •
Firing velocity may vary according to altitude and climate conditions.
BEFORE using your marker in play, you must always first perform a “SAFE VELOCITY TEST”. This can only be accomplished by using a testing device called a “Velocity Chronograph” and can be performed by the dealership where you purchased this product or at a local paintball playing field. Note: This product is intended to be used at a velocity no greater than 300 feet per second (FPS).
Recommended velocity is 280 FPS or less.
This product is NOT intended to be used at any distance less than 25 feet.
This paintball marker may have excess gas after removal of the tank. Please remove all paintballs and discharge the remaining gas safely.
Your age
5/32" x 7/8" Screw (Black)
Filter O-Ring
Valve Body
Air Filter
12" Barrel (Silver)
Valve Body Screw
Disconnect O-Ring #011(Black)
Ball Stopper w/Detent Cover
M5 x 12 Screw (Black)
Plastic Washer
Disconnect Hose
Spare Parts Kit
M4 x 6 Screw (Silver)
Venturi Bolt
Direct Feed (Silver)
Retaining Screw
Receiver (Blue)
Retaining Spring
Vertical Adapter (Blue)
Retaining Bearing
Name of Parts
Striker Bolt Plug (Silver)
Low Pressure Chamber (Silver)
Striker Bolt (#19A)
M5 x 14 Screw w/ Washer
Striker O-Ring
O-Ring #015 80D
Barrel O-Ring (Black)
Valve Spring
Bolt Pin
Trigger Sear
Striker Spring
Striker Buffer
45 Grip Cover
Striker Spring Guide
Grip Cover Screws (M3 x 10)
E-mail address
Country Occupation
Spyder Barrel Plug
Why did you purchase this Kingman marker?
What other brand(s) of markers do you own?
Product name and model
Telephone (
Name Address
Baldwin Park, CA 91706 U.S.A.
Kingman Group
• Do not alter this cylinder in any way.
• Transfer this instruction manual upon change of marker ownership.
• Fire only 0.68 caliber paintballs from this product. • Read this manual and air system warning before using this product.
SPYDER TL-X
• Always remove gas source before disassembly.
LIMITED WARRANTY.
Mail to:
• Do not expose cylinder to corrosive materials and do not clean with caustic cleaners.
RECEIPT, WITHIN 15 DAYS OF PURCHASE SO THAT WE MAY VALIDATE YOUR ONE YEAR
14010 Live Oak Avenue
• This tank is intended for paintball use only.
• Never look down the barrel of the marker.
• The valve should NEVER be detached from the canister. Should this occur, please seek assistance from a trained airsmith immediately.
• Treat every paintball marker as if it were loaded.
• Keep cylinder out of reach of children.
• Never shoot a person who is not wearing proper protection.
PLEASE COMPLETE AND RETURN THIS FORM, ALONG WITH A COPY OF YOUR PURCHASE
• Cylinders heated to a temperature of 250 degrees F or more must be condemned or requalified in accordance with test defined in CFR-49.
• All persons using this product, or within range while this product is being used, must wear eye and face protection specifically designed for paintball.
KINGMAN Warranty Registration
• Do not over pressurize. Do not expose pressurized cylinder to temperatures in excess of 130 degrees F.
• Install a barrel plug in the barrel when not actually playing.
• This cylinder must be filled only by properly Trained personnel in accordance with CGA Pamphlets P.1 and G-6.3 available from the Compressed Gas Association WWW.CGANET.COM
• Recommend at least 18 years of age to purchase this product.
• Improper use, filling, storage or disposal of this cylinder may result in death, personal injury and property damage.
• This paintball marker is NOT a toy. It can cause serious injury or death.
• BOTTLE MUST BE RETESTED SEE CO2/HP TANK LABEL FOR RETEST DATE!
CAUTION
Gas Thru Fore Grip (Silver)
Mini Fore Grip (Blue)
Deluxe Trigger Frame
What are your hobbies (other than paintball)?
What are some magazines you like to read?
Cocking Knob (Blue) Male to Male Metric Adapter
Trigger Roll Pin
Sear Roll Pin
Cup Seal Guide
M4 X 8 Screw (Black)
Flat Disc
Nut Screw
Cup Seal
Quick Disconnect Pin
Lock Screw
C/A Adapter (Blue)
Secondary Sear Roll Pin
Valve Pin
Disconnect Pin Lock
Deluxe Drop Forward (Silver)
Double Trigger
What is the next paintball product you intend to buy?
Safety Button Set (Medium)
Thumb Adjuster w/ screw (Blue)
Avg # of times you play paintball per month
Have you purchased products from the Internet within the last 6 months? Comments/Suggestions:
WARRANTY STATEMENT
TROUBLESHOOTING
SPYDER TL-X OPERATION GUIDE:
Kingman warranties to the original customer purchaser that this product is free from defects in
ONE OR MORE OF THE FOLLOWING MAY CAUSE RECOCKING RELATED PROBLEMS:
material and workmanship under normal use and service for a period of 12 months from the
a. The pressure in the tank is too low or too high.
To put the marker on “SAFE”, push the safety from the “PUSH SAFE” side of the trigger frame. To disengage the safety, point the marker in safe direction, push in the safety from the “PUSH FIRE” side of the trigger frame.
Cock the marker by pulling the Cocking Bolt (#RF39) rearward until it latches. Caution: if you let go before it latches, your marker may fire.
Tighten the air tank until it is snug. If a leak occurs between the air tank and the C/A Adapter, replace the tank o-ring.
Install a 7/8” elbow with loader into the vertical feed. Fill the loader with .68 caliber paintballs only.
With the safety off, fire the marker by pulling the trigger.
Only use lubrication specifically designed for paintball markers. To lubricate your marker, you will need to disassemble your marker (please note how parts are removed from marker as this will ease reassembly). Remove the Disconnect Lock Pin (#23C) and the Disconnect Pin (#23B). Hold down the Striker Plug (#23FA) and Thumb Adjuster (#28291), as internal parts may be springloaded. As you pull the cocking knob out of the receiver, the Cocking Bolt (#RF17) and Striker (#18B) will also be removed.
Lubricate o-rings #9 and #19A with a few drops of paintball oil only.
The first 1026 words, extracted from the PDF. Read the full manual above, or download it.