Spyder Electra Dx Manual - English

WARNING

• Install a barrel plug in the barrel when not actually playing. • All persons using this product, or within range while this product is being used, must wear eye and face protection specifically designed for paintball. • Never shoot a person who is not wearing proper protection. • Treat every paintball marker as if it were loaded.

• VALVES MUST BE INSTALLED OR REMOVED ONLY BY QUALIFIED PERSONNEL.

• Never look down the barrel of the marker. • Keep the paintball marker on safe until ready to shoot.

• BOTTLE MUST BE RETESTED SEE CO2/HP TANK LABEL FOR RETEST DATE!

• Always remove gas source before disassembly. • Fire only 0.68 caliber paintballs from this product.

• Improper use, filling, storage or disposal of this cylinder may result in death, personal

• Read this manual and air system warning before using this product.

injury and property damage.

• Transfer this instruction manual upon change of marker ownership. • This cylinder must be filled only by properly Trained personnel in accordance with CGA Pamphlets P.1 and G-6.3 available from the Compressed Gas Association www.CGANET.COM

IMPORTANT

• Do not over pressurize. Do not expose pressurized cylinder to temperatures in excess of 130 degrees F.

• Firing velocity may vary according to altitude and climate conditions. • BEFORE using your marker in play, you must always first perform a

• Do not expose cylinder to corrosive materials and do not clean with caustic cleaners.

“SAFE VELOCITY TEST”. This can only be accomplished by using a testing device called a “Velocity Chronograph” and can be performed by the dealership where you

• Do not alter this cylinder in any way.

purchased this product or at a local paintball playing field. • NOTE: This product is intended to be used at a velocity no greater than

• Cylinders heated to a temperature of 250 degrees For more must be condemned or re-

300 feet per second (FPS).

qualified in accordance with test defined in CFR-49.

• Recommended velocity is 280 FPS or less. • This product is NOT intended to be used at any distance less than 25 feet.

• Keep cylinder out of reach of children.

• This paintball marker may have excess gas after removal of the tank. Please remove all paintballs and discharge the remaining gas safely.

• The valve should NEVER be detached from the canister. Should this occur, please seek assistance from a trained airsmith immediately. • This tank is intended for paintball use only.

Spyder Electra & Electra DX

(Matte Black and Matte Blue) ITEM #

NAME OF PARTS

Spyder Barrel Plug

Striker Spring Guide

Electra 13.5" Barrel (Black)

Flat Disc

Electra 13.5" Barrel (Blue)

Lock Screw

Mini Detent Cover (Black)

LED Circuit Board

M4 x 6 Screw (Black)

Thumb Adjuster w/ Screw (Black)

M4 x 6 Screw (Silver)

Thumb Adjuster w/ Screw (Blue)

Direct Feed Screw

Compact Nut Screw

M5 X 14 Screw w/ Washer

Spyder Gauge

O-Ring #015 80D

Regulator Lock Screw

Valve Spring

Electra Drop Forward (Black)

Cup Seal Guide

Electra Drop Forward (Blue)

Cup Seal

5/32" X 7/8" Screw (Silver)

Valve Pin

5/32" x 5/8" Screw (Black)

Valve Body

5/32" X 7/8" Screw (Black)

Valve Body Screw

Filter O-Ring

M5 x 12 Screw (Black)

Air Filter

M5 x 12 Screw (Silver)

Disconnect O-Ring #011 (Black)

Electra Venturi Cocking Bolt

Plastic Washer

Retaining Screw

Electra Disconnect Hose

Retaining Spring

Electra Striker Knob

Retaining Ball

Electra Spare Parts Kit

Striker

Male To Male Adapter

Striker O-Ring

C/A Male Adapter

Barrel O-Ring (Black)

Electra Sight Rail (Black)

Bolt Pin

Electra Sight Rail (Blue)

Direct Feed (Black)

Trigger Roll Pin

Direct Feed (Blue)

Secondary Sear Roll Pin

Electra Receiver (Black)

Touch Switch Roll Pin

Electra Receiver (Blue)

On/Off Switch with Wiring Harness

Vertical Adapter (Black)

Battery Harness

Vertical Adapter w/ Gauge (Blue)

On/Off Screw (M2 x 6 Screw)

Low Pressure Chamber (Black)

Straight Elbow - 2 3/4"(Clear)

Low Pressure Chamber (Blue)

Java 9.6v Rechargeable Battery

Striker Plug (Black)

Trigger Sear

Striker Plug (Silver)

Coil Set

C/A Adapter (Black)

Coil Set Screw

C/A Adapter w/ Regulator (Blue)

Charge Pin

Mini Fore Grip (Black)

Touch Switch

Mini Fore Grip (Blue)

Circuit Board Screw

Model S Expansion Chamber (Pewter)

Tournament Lock Switch

Model S Expansion Chamber (Silver)

Trigger

Bolt Screw

Trigger Adjust Screw

M4 X 8 Screw w/Washer (Black)

Sear Spring

Quick Disconnect Pin

Trigger Spring

Disconnect Pin Lock

Grip Cover (Black)

Sight Rail Screw w/ washer

Grip Cover (Clear)

Striker Spring

Grip Cover Screw (Black)

Striker Buffer

Grip Cover Screw (Silver)

SPYDER Electra and Electra DX Parts List

JE33C/JE33D JE33C/JE33D

JE33C/JE33D

* For Electra DX Model Only.