Spyder E99 Avant Manual - English

WARNING

• Install a barrel plug in the barrel when not actually playing. • All persons using this product, or within range while this product is being used, must wear eye and face protection specifically designed for paintball. • Never shoot a person who is not wearing proper protection. • Treat every paintball marker as if it were loaded.

• VALVES MUST BE INSTALLED OR REMOVED ONLY BY QUALIFIED PERSONNEL.

• Never look down the barrel of the marker. • Keep the paintball marker on safe until ready to shoot.

• BOTTLE MUST BE RETESTED SEE CO2/HP TANK LABEL FOR RETEST DATE!

• Always remove gas source before disassembly. • Fire only 0.68 caliber paintballs from this product.

• Improper use, filling, storage or disposal of this cylinder may result in death, personal

• Read this manual and air system warning before using this product.

injury and property damage.

• Transfer this instruction manual upon change of marker ownership. • This cylinder must be filled only by properly Trained personnel in accordance with CGA Pamphlets P.1 and G-6.3 available from the Compressed Gas Association www.CGANET.COM

IMPORTANT

• Do not over pressurize. Do not expose pressurized cylinder to temperatures in excess of 130 degrees F.

• Firing velocity may vary according to altitude and climate conditions. • BEFORE using your marker in play, you must always first perform a

• Do not expose cylinder to corrosive materials and do not clean with caustic cleaners.

“SAFE VELOCITY TEST”. This can only be accomplished by using a testing device called a “Velocity Chronograph” and can be performed by the dealership where you

• Do not alter this cylinder in any way.

purchased this product or at a local paintball playing field. • NOTE: This product is intended to be used at a velocity no greater than

• Cylinders heated to a temperature of 250 degrees For more must be condemned or re-

300 feet per second (FPS).

qualified in accordance with test defined in CFR-49.

• Recommended velocity is 280 FPS or less. • This product is NOT intended to be used at any distance less than 25 feet.

• Keep cylinder out of reach of children.

• This paintball marker may have excess gas after removal of the tank. Please remove all paintballs and discharge the remaining gas safely.

• The valve should NEVER be detached from the canister. Should this occur, please seek assistance from a trained airsmith immediately. • This tank is intended for paintball use only.

Spyder E99 Avant (black & green)

Coil Set

Expansion Chamber (Silver)

Coil Set Screw (A)

Bolt Screw

Charge Pin

Vertical Adapter (Black)

Battery Low Indicator

Striker Plug (Black)

Low R.O.F. Indicator

C/A Adapter (Black)

High R.O.F. Indicator

Mini Fore Grip (Black)

Single Shot Indicator

M4 X 8 Screw w/Washer (Black)

3 Round Burst Indicator

Quick Disconnect Pin

Full Auto Indicator

Disconnect Pin Lock

IPI 3.0 Circuit Board

Striker Spring

Circuit Board Screw

Striker Buffer

Grip Cover Screw (Black)

Striker Spring Guide

SPYDER E99 Avant Parts List

Drop Forward (Matted Silver)

Striker Bolt

Low Pressure Chamber (Matted Silver)

Trigger Sear

E99 Receiver (Black)

Java 9.6v Rechargeable Battery

E99 Receiver (Green)

On/Off Screw (M2 x 6 Screw)

Direct Feed (Black)

Battery Harness

Direct Feed (Green)

On/Off Switch with Wiring Harnesses

Bolt Pin

Touch Switch Roll Pin

Barrel O-Ring (Black)

Secondary Sear Roll Pin

Striker O-Ring

Sear Roll Pin (Medium)

E99 Venturi Cocking Bolt (Black)

Sight Rail with Beaver Tail (Black)

M5 x 12 Screw w/ washer

Sight Rail with Beaver Tail (Silver)

Valve Body Screw

E99 Spare Parts Kit

Valve Body

Disconnect Hose

Valve Pin

Plastic Washer

Cup Seal

Disconnect O-Ring #011 (Black)

Cup Seal Guide

Air Filter

Valve Spring

Filter O-Ring

O-Ring #015 80D

5/32" X 7/8" Screw (Black)

M5 X 14 Screw w/ Washer

5/32" x 5/8" Screw (Black)

JE29 JE26 JE28N JE28A JE28B2 JE28B1 JE29A

Direct Feed Screw

Compact Nut Screw

M4 x 6 Screw (Silver)

E-99 Grip Cover (Black)

M4 x 6 Screw (Black)

Thumb Adjuster w/ Screw (Silver)

Mini Detent Cover (Black)

Lock Screw

12" Barrel (Black)

Flat Disc

NAME OF PARTS

Spyder Barrel Plug