Spyder 2010 Mr1 Manual - English

QUICK CLEAN / DISASSEMBLE / REASSEMBLE REAR INTERNALS

CUP SEAL REMOVAL GUIDE

TROUBLESHOOTING

AIR LEAKS

MR1 PARTS LIST

MR1 SCHEMATIC

WARRANTY STATEMENT

English IMPORTANT SAFETY GUIDELINES WARNING • • • • • •

This paintball marker is NOT a toy. Misuse can cause serious injury or death. Kingman recommends that the customer be at least 18 years of age to purchase this product. Person under 18 years of age must have adult supervision when using this product. Read this User manual before using this product. Any modifications or tampering of original factory parts or use non authorized aftermarket accessories will void all warranties and liabilities from Kingman. Keep the barrel blocking device on marker when not shooting/playing. To ensure proper adjustment of velocity Feet per Second (fps), Kingman strongly recommends using a chronograph for paintball use located or purchased at most paintball stores and paintball fields. The discharges of paintballs are high velocity and high impact that can cause serious injuries or death if misused. Before / after use of the marker, check and make sure all screws are securely tightened. Loose screws may prevent the marker from functioning properly. A paintball marker NOT properly maintained can be dangerous and can cause serious injury or death. Any person using this product or within range of this product while it is in use MUST wear EYES/FACE, EARS PROTECTION designed specifically for the sport of paintball. This includes, but is not limited to, performing a maintenance, velocity check and target practice. Kingman reminds the user that SAFETY IS YOUR RESPONSIBILITY. Protect your eyes/face and ears at all times, and will not be held liable for injuries or death sustained when failing to follow the safety guidelines. Never shoot or point your marker at a person that is not in a designated paintball facility and without proper paintball EYES/FACE/EARS PROTECTION. The protection includes and not limited to the protection of eyes, face, ears, neck and head. Avoid shooting underneath the paintball goggles. DO NOT point or shoot at any Law Enforcement Officer. Treat every paintball marker as if it were loaded. Never look down the barrel of a loaded or unloaded marker. Always keep the paintball marker in SAFE mode until ready to operate. Always remove the air source and all paintballs from the marker, includes paintballs inside the breach of the marker, before disassembly. Fire only 0.68 caliber paintballs with this product. Always make certain the bolt of the marker is in the un-cocked position when not shooting/playing. Using a paintball marker outside of a non designated paintball field can be illegal, and is subject to law enforcement penalties if property damage is caused by the user. Never point or shoot your marker at an animal. Never point the barrel toward yourself while playing, running or stumbling to avoid shooting underneath your paintball goggles. Wear appropriate dress to avoid any exposure of skin to protect you when playing paintball games. Transfer this User manual upon change of marker ownership. Please visit www.spyder.tv for the latest User Manual updates..

OPERATION GUIDE / START UP 1. 2.

Always attach a barrel blocking device over the tip of the barrel for safety precautions when not shooting/playing. Have the marker in the “SAFE” position before use. To operate, push the safety button from the “PUSH SAFE” side of the trigger frame. This will position the marker in a lock safe mode. To disengage the safety button in a safely manner, point the marker in a safe direction, and push the safety button towards the opposite side of the trigger frame. Do not disengage safety button until step 6. 3. Attach a CO2 / Compressed Air Tank to the C/A Adapter. HELPFUL TIP: Make sure to have the CO2 / Compressed Air Tank filled before attaching to the marker. Hand tightens the tank clockwise in the markers C/A adapter until it is snug. If an air leak occurs between the tank and the C/A adapter, replace the urethane O-ring. NOTE: O-rings in the markers parts kit are not supplied to attach with a CO2 / Compressed Air Tank. IMPORTANT: You should never need to use any hand tool to attach a CO2 / Compressed Air Tank to the C/A adapter. (See CO2/Compressed Air Tank Warning) 4. Attach an elbow and paintball loader to the markers feed neck. NOTE: Small hole on the elbow must fasten to the markers feed neck and larger hole to the loader. Elbows with adjusting screws must tighten accordingly. NOTE: Fill your paintball loader with only .68 caliber paintballs. 5. Cocking the marker. Pull the Top Cocking Knob rearward until the Delrin Bolt latches. CAUTION: Should you let go of the Top Cocking Knob before it latches, your marker may fire. 6. Remove the barrel blocking device over the barrel. Now you can release the safety button. CAUTION: With the safety button released in the FIRE position the marker is ready to shoot/play. By pulling the trigger will fire a paintball. IMPORTANT: Only test your marker in a safe direction or in a designated playing field. 7. Performing a velocity (fps) check. Turning the velocity adjuster & spring guide clockwise will increase the velocity (fps) while turning counter-clockwise will decrease the velocity (fps). NOTE: Your marker is intended to be used in a paintball facility with the proper paintball protection. IMPORTANT: Kingman recommends using a chronograph to ensure that the marker’s velocity is under 300 (fps). 8. When finished playing, remove all paintballs from the paintball loader before detaching from the markers feed neck by…