Angel Speed Manual - English

• Este manual de (operarios y) usarios està en Inglés. • Contiene importantes normas de seguridad e instrucciones. • Si no esta seguro de algún punto o no entiende los contenidos de este manual debe conultar con un experto.

OPERATING INSTRUCTIONS

Charging

Switching on

Propellant Air/Nitrogen Supply

Macro Line Hose/Connector attachment

Macro Line Hose removal and re-attachment

OPTOTM Board

Bolt Removal Rotor BreechTM

Velocity Adjustment

Gated FeedTM

EXTERNAL ELECTRONIC LED MENUS SENSiTM Test

• Sollten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalt dieses Heftes nicht verstehen, lassen Sie siche bitte von einem Experten beraten.

Sub Assemblies

Exploded Left Hand View

Exploded Right Hand View

Mini-Regulator Service

Anti-Double Ball Detent Service

Low Pressure Regulator (LPR) Adjustment

LPR Assembly Removal

LPR Main Seal Replacement

Exhaust Valve Stem Removal

Exhaust Guide Removal

RAM Stroke Adjustment

RAM Removal

Servicing

Trigger Return, Over-Travel & Toe Adjustments 31 8

Trigger Pivot Point Adjustments

Switching SENSi ON/OFF

Battery Removal

Wiring Connections

Battery Status

APPENDIX

• Diese Bedienungs- und Benutzeranleitung ist in Englisch. • Sie enthält wichtige Sicherheitsrichtlinien und -bestimmungen.

General Care and Cleaning

CONTENTS

• Le mode d’emploi est en Anglais.

INTERNAL ELECTRONIC LED MENUS Factory Settings

SENSiTM Modes

Fault Finding Table

Useful Conversions

Terms of Warranty - EEC/R.O.W Exc USA/CAN

WDP Ltd. Express Warranty USA/CAN Only

Updates

Your Personal Details

WARNINGS – IMPORTANT SAFETY INSTRUCTIONS & GUIDELINES

m WARNING

ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES

IMPORTANT SAFETY INSTRUCTIONS & GUIDELINES WARNINGS FOR SAFE ANGELTM HANDLING · The ANGELTM is not a toy.

· Do not fire the ANGELTM with the pull knob in the unlocked position.

· Careless or improper use, including failure to follow instructions and warnings within this Operator Manual and attached to the ANGELTM, could cause death or serious injury.

· Never look into the barrel or breech area of the ANGELTM whilst the marker is switched on and able to fire.

· Do not remove or deface any warnings attached to the ANGELTM.

WARNINGS

· Paintball industry standard eye/face/ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by user and any person within range.

· Never allow pressurised gas to come into contact with any part of your body. · Always switch off the ANGELTM when not in use.

· Must be at least 18 years of age to purchase the ANGELTM.

· Always fit a barrel blocking device to your ANGELTM when not in use on the field of play.

· Persons under 18 years of age must have adult supervision when using or handling the ANGELTM.

· Always remove all paintballs from the ANGELTM when not in use on the field of play.

· Observe all local and national laws, regulations and guidelines.

· The Gated Feed is designed to retain a number of paintballs in the feed tube and breech area of the ANGELTM Always ensure that these paintballs are removed from the ANGELTM when it is not in use on the field of play.

· Use only on professional paintball fields where codes of safety are strictly enforced. · Use compressed air/nitrogen gas only. Do not use CO2. · Do not exceed 850 psi (58 bar) input pressure. · Always follow instructions, warnings and guidelines given with any first stage regulator you use with the ANGELTM. · Use 0.68 calibre paintballs only. · Keep the ANGELTM switched off until ready to shoot. · Treat every marker as if it is loaded.

· Never put your finger or any foreign objects into the paintball feed tube of the ANGELTM

· Always remove the first stage regulator and relieve all residual gas pressure from the ANGELTM before disassembly. · The ANGELTM can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed. Always discharge the marker in a safe direction to relieve this residual gas pressure. · Always remove first stage regulator and all residual gas pressure from the ANGELTM for transport and storage.

· Never point the ANGELTM at anything you do not intend to shoot.

· Always follow warnings and guidelines given with your first stage regulator for safe transport and storage.

· Do not shoot at persons at close range.

· Only charge the ANGELTM using the charger supplied.

· Do not shoot at fragile objects such as windows.

· Only use 12 Volt negative earth vehicles as a power supply for the charger.

· Always measure your markers velocity before playing paintball, using a suitable chronograph.

· Do not leave the ANGELTM unattended whilst charging.

· Never shoot at velocities in excess of 300 feet (91.44 meters) per second, or at velocities greater than local or national laws allow.

· THIS OPERATOR MANUAL MUST ALWAYS ACCOMPANY THE PRODUCT IN THE EVENT OF RESALE OR NEW OWNERSHIP.

· Do not fire the ANGELTM with the breech open or without the bolt in the breech, as high pressure gas will be emitted.

· SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.

· Always store the ANGELTM in a secure place.

OPERATION – CHARGING The ANGELTM may be left charging for prolonged periods without damage occurring to the battery pack. · A full charge will give sufficient power for approximately 150,000 consecutive shots. · A 1-hour charge at 12.5V DC will give sufficient power for approximately 40,000 consecutive shots. The ANGELTM will continue to use power whilst it is switched ON. To save the charge the isolator switch must be switched…