Contents
• This Operator’s and User’s Manual is in English. • It contains important safety guidelines and Instructions. • S hould you be unsure at any stage, or unable to understand the contents within this manual you must seek expert advice.
• L e mode d’emploi est en Anglais. • Il contient des instructions et mesures de sécurité importantes. • En cas de doute, ou s’il vous est impossible de comprendre le contenu du monde d’emploi, demandez conseil à un expert.
• E ste manual de (operarios y) usarios està en Inglés. •C ontiene importantes normas de seguridad e instrucciones. • Si no esta seguro de algún punto o no entiende los contenidos de este manual debe conultar con un experto.
•D iese Bedienungs- und Benutzeranleitung ist in Englisch. • S ie enthält wichtige herheitsrichtlinien und -bestimmungen. • S ollten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalt dieses Heftes nicht verstehen, lassen Sie siche bitte von einem Experten beraten.
General Warnings
MROF eyes on/off
Switching on your Angel
Breakout
Turning the Angel off
Navigation switch
Shot % filtering
Replacing the 9v battery
Anti bolt stick
Switching Angel eyes on/off
Software version
OPTO board
Factory reset
Macro line hose
Game timer alarm
Propellant air/nitrogen supply
Tournament lock
Adjusting the ASA position
General care and cleaning
Installing an air nitrogen system
Left & right cut-aways
Bolt removal and rotor breech
General assemblies
Velocity adjustment
In-line regulator service & assembly
Rubber finger detent
Angel eyes servicing
OLED menu
Modes Semi Auto
Angel eyes removal
LPR adjustment
MILLENNIUM
LPR assembly removal & replacement
XBall/NXL
LPR spool removal
Exhaust valve guide removal
Full Auto
Exhaust valve stem removal
Ram removal
Custom Semi
Magnetic force trigger adjustment
Front and back stop position adjustment
Soft breakout
Trigger activation position
Hard breakout
Wiring connections
Fault finding
Parameters
Useful conversions
Valve dwell
Warranty - EEC/ROW
De-Bounce
Warranty - USA/Canada
Loader speed delay
Warranty card
ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES
• The ANGEL is not a toy. • Careless or improper use, including failure to follow instructions and warnings within this Operator Manual and attached to the ANGEL could cause death or serious injury. • Do not remove or deface any warnings attached to the ANGEL. • Paintball industry standard eye/face/ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by user and any person within range. • Must be at least 18 years of age to purchase the ANGEL. • Persons under 18 years of age must have adult supervision when using or handling the ANGEL. • Observe all local and national laws, regulations and guidelines. • Use only on professional paintball fields where codes of safety are strictly enforced. • Use 0.68 calibre paintballs only. • Keep the ANGEL switched off until ready to shoot. • Treat every Angel as if it is loaded. • Never point the ANGEL at anything you do not intend to shoot. • Do not shoot at persons at close range. • Do not shoot at fragile objects such as windows. • Always measure your Angels velocity before playing paintball, using a suitable chronograph. • Never shoot at velocities in excess of 300 feet (92 meters) per second, or at velocities greater than local or national laws allow. • Do not fire the ANGEL with the breech open or without the bolt in the breech, as high pressure gas will be emitted. • Use compressed air/nitrogen gas only. Do not use CO2. • Do not exceed 850 psi (58 bar) input pressure.
• Always follow instructions, warnings and guidelines given with any first stage regulator you use with the ANGEL. • Do not fire the ANGEL with the breech release knob in the unlocked position. • Never look into the barrel or breech area of the ANGEL whilst the Angel is switched on and able to fire. • Never put your finger or any foreign objects into the breech or paintball feed tube of the ANGEL • Never allow pressurised gas to come into contact with any part of your body. • Always switch off the ANGEL when not in use. • Always fit a barrel blocking device to your ANGEL when not in use on the field of play. • Always remove all paintballs from the ANGEL when not in use on the field of play. • Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL before disassembly. • The ANGEL can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed. Always discharge the Angel in a safe direction to relieve this residual gas pressure. • Always remove first stage regulator and all residual gas pressure from the ANGEL for transport and storage. • Always follow warnings and guidelines given with your first stage regulator for safe transport and storage. • Always store the ANGEL in a secure place. • THIS OPERATOR’S MANUAL MUST ALWAYS ACCOMPANY THE PRODUCT IN THE EVENT OF RESALE OR NEW OWNERSHIP. • SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.
Switch the Angel off by pressing and holding the navigation switch 1 in for 1 second. A goodbye message will be displayed on the screen and the Angel will power down.
· Angel is LIVE and capable of firing.
To switch the Angel on press and hold the navigation switch 1 inwards for up to 2 seconds. The Angel will turn on and will automatically go into LIVE mode with the eyes on. The display screen will illuminate and will show the firing Status of the Angel.
Push & hold for 1 sec
The LED on the rear of the grip frame will show blue.
Push & hold navigation switch for up to 2 secs
Making the Angel SAFE When you turn the Angel on the Angel is LIVE. To make the Angel SAFE, either: • Access the menu options by pushing the navigation upwards and holding for 1.5 sec. This automatically puts the Angel in SAFE. • Choose SAFE from the menu options.
Gun status Battery status
Eyes status Ball status
The first 1033 words, extracted from the PDF. Read the full manual above, or download it.