Angel G7 Manual - English

Loaders (Hoppers)

LPR Main Seal Replacement

Soft Nose Bolt Removal & Rotor Breech

Exhaust Guide Removal

Velocity Adjustment

Exhaust Valve Stem Removal

Ram Removal

OPTO Board

Vernier Trigger Adjustments

Vernier Trigger Wheel Removal

Battery Removal

Wiring Connections

OPERATING INSTRUCTIONS Charging Switching On Your ANGEL Making the ANGEL Safe

Macro Line Hose/Connector attachment Macro Line Hose removal and re-attachment

Twist Lock Feed Collar

LCD MENUS • This Operators and Users Manual is in English. • It contains important safety guidelines and Instructions. • Should you be unsure at any stage, or unable to understand the contents within this manual you must seek expert advice.

ANGEL G7

Basic Menu

Menu – Fetch – Timer – Angel Eyes Test Advanced Menu

MROF – Hopper (Loader) T Time – Hopper (Loader) A Time Hopper (Loader) Type – Temperature – Vibrator – Trip – Backlight

APPENDIX

SEND IR – ROF – MODE – Dwell – Cycles – ID – Trigger Offset • Le mode d’emploi est en Anglais.

Internal Electronic Menus

Fault Finding Table

• Il contient des instructions et mesures de sécurité importantes.

Factory Default Settings

Useful Conversions

Terms of Warranty - EEC/R.O.W Exc USA/CAN

WDP Ltd. Express Warranty USA/CAN Only

Updates

• En cas de doute, ou s’il vous est impossible de comprendre le contenu du monde d’emploi, demandez conseil à un expert.

• Este manual de (operarios y) usarios està en Inglés. • Contiene importantes normas de seguridad e instrucciones. • Si no esta seguro de algún punto o no entiende los contenidos de este manual debe conultar con un experto.

• Diese Bedienungs- und Benutzeranleitung ist in Englisch. • Sie enthält wichtige Sicherheitsrichtlinien und -bestimmungen. • Sollten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalt dieses Heftes nicht verstehen, lassen Sie siche bitte von einem Experten beraten.

© 2005 WDP LTD.

FIGURES 1 Basic & Advanced Menus

2 Internal Menu

3 Internal Text Programming

4 Internal PIN Programming

5 External PIN Lock/Unlock

6 Game Timer Activation

Your Personal Details

Warnings: Important Safety Instructions & Guidelines

 WARNING

ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES

WARNINGS FOR SAFE ANGEL HANDLING • The ANGEL is not a toy. • Careless or improper use, including failure to follow instructions and warnings within this Operator Manual and attached to the ANGEL could cause death or serious injury. • Do not remove or deface any warnings attached to the ANGEL. • Paintball industry standard eye/face/ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by user and any person within range. • Must be at least 18 years of age to purchase the ANGEL. • Persons under 18 years of age must have adult supervision when using or handling the ANGEL. • Observe all local and national laws, regulations and guidelines. • Use only on professional paintball fields where codes of safety are strictly enforced. • Use compressed air/nitrogen gas only. Do not use CO2. • Do not exceed 850 psi (58 bar) input pressure. • Always follow instructions, warnings and guidelines given with any first stage regulator you use with the ANGEL. • Use 0.68 calibre paintballs only. • Keep the ANGEL switched off until ready to shoot. • Treat every marker as if it is loaded. • Never point the ANGEL at anything you do not intend to shoot. • Do not shoot at persons at close range. • Do not shoot at fragile objects such as windows. • Always measure your markers velocity before playing paintball, using a suitable chronograph. • Never shoot at velocities in excess of 300 feet (91.44 meters) per second, or at velocities greater than local or national laws allow. • Do not fire the ANGEL with the breech open or without the bolt in the breech, as high pressure gas will be emitted.

• Do not fire the ANGEL with the pull knob in the unlocked position. • Never look into the barrel or breech area of the ANGEL whilst the marker is switched on and able to fire. • Never put your finger or any foreign objects into the paintball feed tube of the ANGEL • Never allow pressurised gas to come into contact with any part of your body. • Always switch off the ANGEL when not in use. • Always fit a barrel blocking device to your ANGEL when not in use on the field of play. • Always remove all paintballs from the ANGEL when not in use on the field of play. • The Twisted Lock Gated Feed™ is designed to retain a number of paintballs in the feed tube and breech area of the ANGEL Always ensure that these paintballs are removed from the ANGEL when it is not in use on the field of play. • Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL before disassembly. • The ANGEL can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed. Always discharge the marker in a safe direction to relieve this residual gas pressure. • Always remove first stage regulator and all residual gas pressure from the ANGEL for transport and storage. • Always follow warnings and guidelines given with your first stage regulator for safe transport and storage. • Only charge the ANGEL using the charger supplied. • Only use 12 Volt negative earth vehicles as a power supply for the charger. • Do not leave the ANGEL unattended whilst charging. • Always store the ANGEL in a secure place. • THIS OPERATOR MANUAL MUST ALWAYS ACCOMPANY THE PRODUCT IN THE EVENT OF RESALE OR NEW OWNERSHIP. • SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE. © 2005 WDP LTD.

Charging – Switching On Your ANGEL

CHARGING