Angel 4 Manual - English

• Este manual de (operarios y) usarios està en Inglés. • Contiene importantes normas de seguridad e instrucciones. • Si no esta seguro de algún punto o no entiende los contenidos de este manual debe conultar con un experto.

3 Charging 3 Switching On Your ANGEL™ 4 Making the ANGEL™ Live / Safe 5 Switching SENSi™ On/Off 5 Propellant Air/Nitrogen Supply 6 Macro Line Hose/Connector attachment 6 Macro Line Hose removal and re-attachment 6 OPTO™ Board / Soft Bolt Removal Rotor Breech 7 Velocity Adjustment 8 Twist Lock Gated Feed™ 9 Volumizer Accessories 10 Fitting an Intellifeed (Optional Extra) 11

DUAL EXTERNAL MENUS IN SAFE MODE Basic Menu Advanced Menu

• Diese Bedienungs- und Benutzeranleitung ist in Englisch. • Sie enthält wichtige Sicherheitsrichtlinien und -bestimmungen. • Sollten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalt dieses Heftes nicht verstehen, lassen Sie siche bitte von einem Experten beraten.

FIGURES 1 Basic Menu 2 Advanced Menu 3 Internal Menu 4 Internal Text Programming 5 Internal PIN Programming 6 External PIN Lock/Unlock 7 Game Timer Activation

CONTENTS

• En cas de doute, ou s’il vous est impossible de comprendre le contenu du monde d’emploi, demandez conseil à un expert.

OPERATING INSTRUCTIONS

General Care and Cleaning General Assembly - Right Hand View General Assembly - Left Hand View Cutaway – Right Hand View Cutaway – Left Hand View Sub Assemblies Mini-Regulator Service Anti-Double Ball Detent Service Micro-Pressure Indicator SENSi™ Test & Replacement LPR Adjustment LPR Assembly Removal LPR Main Seal Replacement Exhaust Guide Removal Exhaust Valve Stem Removal RAM Stroke Adjustment RAM Removal Servicing Vernier Trigger Adjustments Vernier Trigger Wheel Removal Battery Removal Wiring Connections

APPENDIX Fault Finding Table Useful Conversions Terms of Warranty - EEC/R.O.W Exc USA/CAN WDP Ltd. Express Warranty USA/CAN Only Updates Your Personal Details

WARNINGS – IMPORTANT SAFETY INSTRUCTIONS & GUIDELINES

m WARNING

ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES

IMPORTANT SAFETY INSTRUCTIONS & GUIDELINES WARNINGS FOR SAFE ANGEL™ HANDLING · The ANGEL™ is not a toy.

· Do not fire the ANGEL™ with the pull knob in the unlocked position.

· Careless or improper use, including failure to follow instructions and warnings within this Operator Manual and attached to the ANGEL™, could cause death or serious injury.

· Never look into the barrel or breech area of the ANGEL™ whilst the marker is switched on and able to fire.

· Do not remove or deface any warnings attached to the ANGEL™.

WARNINGS

· Paintball industry standard eye/face/ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by user and any person within range.

· Never allow pressurised gas to come into contact with any part of your body. · Always switch off the ANGEL™ when not in use.

· Must be at least 18 years of age to purchase the ANGEL™.

· Always fit a barrel blocking device to your ANGEL™ when not in use on the field of play.

· Persons under 18 years of age must have adult supervision when using or handling the ANGEL™.

· Always remove all paintballs from the ANGEL™ when not in use on the field of play.

· Observe all local and national laws, regulations and guidelines.

· The Twisted Lock Gated Feed™ is designed to retain a number of paintballs in the feed tube and breech area of the ANGEL™ Always ensure that these paintballs are removed from the ANGEL™ when it is not in use on the field of play.

· Use only on professional paintball fields where codes of safety are strictly enforced. · Use compressed air/nitrogen gas only. Do not use CO2. · Do not exceed 850 psi (58 bar) input pressure. · Always follow instructions, warnings and guidelines given with any first stage regulator you use with the ANGEL™. · Use 0.68 calibre paintballs only. · Keep the ANGEL™ switched off until ready to shoot. · Treat every marker as if it is loaded.

· Never put your finger or any foreign objects into the paintball feed tube of the ANGEL™

· Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL™ before disassembly. · The ANGEL™ can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed. Always discharge the marker in a safe direction to relieve this residual gas pressure. · Always remove first stage regulator and all residual gas pressure from the ANGEL™ for transport and storage.

· Never point the ANGEL™ at anything you do not intend to shoot.

· Always follow warnings and guidelines given with your first stage regulator for safe transport and storage.

· Do not shoot at persons at close range.

· Only charge the ANGEL™ using the charger supplied.

· Do not shoot at fragile objects such as windows.

· Only use 12 Volt negative earth vehicles as a power supply for the charger.

· Always measure your markers velocity before playing paintball, using a suitable chronograph.

· Do not leave the ANGEL™ unattended whilst charging.

· Never shoot at velocities in excess of 300 feet (91.44 meters) per second, or at velocities greater than local or national laws allow.

· THIS OPERATOR MANUAL MUST ALWAYS ACCOMPANY THE PRODUCT IN THE EVENT OF RESALE OR NEW OWNERSHIP.

· Do not fire the ANGEL™ with the breech open or without the bolt in the breech, as high pressure gas will be emitted.

· SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.

· Always store the ANGEL™ in a secure place.

OPERATION – CHARGING