Angel Speed 2005 Manual - English

Vernier Trigger Adjustments

All rights will be strictly enforced.

Propellant Air/Nitrogen Supply

Vernier Trigger Wheel Removal

Macro Line Hose/Connector attachment

Wiring Connections

Opto Board

Macro Line Hose removal and re-attachment

APPENDIX

Loaders (Hoppers)

Soft Nose Bolt Removal & Rotor Breech

Fault Finding Table

Velocity Adjustment

Useful Conversions

Twist Lock Feed Collar

Terms of Warranty - EEC/R.O.W Exc USA/CAN

Volumizer Accessories

WDP Ltd. Express Warranty USA/CAN Only

Updates

Your Personal Details

• This Operators and Users Manual is in English. • It contains important safety guidelines and Instructions. • Should you be unsure at any stage, or unable to understand the contents within this manual you must seek expert advice.

LED MENUS Internal Electronic Menus

Factory Default Settings

• Le mode d’emploi est en Anglais.

Trigger Offset

• Il contient des instructions et mesures de sécurité importantes.

• En cas de doute, ou s’il vous est impossible de comprendre le contenu du monde d’emploi, demandez conseil à un expert.

Loader

Battery

• Este manual de (operarios y) usarios està en Inglés.

MAINTENANCE

• Contiene importantes normas de seguridad e instrucciones. • Si no esta seguro de algún punto o no entiende los contenidos de este manual debe conultar con un experto.

• Diese Bedienungs- und Benutzeranleitung ist in Englisch. • Sie enthält wichtige Sicherheitsrichtlinien und -bestimmungen. • Sollten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalt dieses Heftes nicht verstehen, lassen Sie siche bitte von einem Experten beraten.

© 2004 WDP LTD.

General Care and Cleaning

General Assembly - Right Hand View

General Assembly - Left Hand View

Sub Assemblies

Cutaway – Right Hand View

Cutaway – Left Hand View

Mini-Regulator Service

Anti-Double Ball Detent Service

WARNINGS

Warnings: Important Safety Instructions & Guidelines

 WARNING

ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES

WARNINGS FOR SAFE ANGEL HANDLING · The ANGEL is not a toy. · Careless or improper use, including failure to follow instructions and warnings within this Operator Manual and attached to the ANGEL could cause death or serious injury. · Do not remove or deface any warnings attached to the ANGEL. · Paintball industry standard eye/face/ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by user and any person within range. · Must be at least 18 years of age to purchase the ANGEL. · Persons under 18 years of age must have adult supervision when using or handling the ANGEL. · Observe all local and national laws, regulations and guidelines. · Use only on professional paintball fields where codes of safety are strictly enforced. · Use compressed air/nitrogen gas only. Do not use CO2. · Do not exceed 850 psi (58 bar) input pressure. · Always follow instructions, warnings and guidelines given with any first stage regulator you use with the ANGEL. · Use 0.68 calibre paintballs only. · Keep the ANGEL switched off until ready to shoot. · Treat every marker as if it is loaded. · Never point the ANGEL at anything you do not intend to shoot. · Do not shoot at persons at close range. · Do not shoot at fragile objects such as windows. · Always measure your markers velocity before playing paintball, using a suitable chronograph. · Never shoot at velocities in excess of 300 feet (91.44 meters) per second, or at velocities greater than local or national laws allow. · Do not fire the ANGEL with the breech open or without the bolt in the breech, as high pressure gas will be emitted.

· Do not fire the ANGEL with the pull knob in the unlocked position. · Never look into the barrel or breech area of the ANGEL whilst the marker is switched on and able to fire. · Never put your finger or any foreign objects into the paintball feed tube of the ANGEL · Never allow pressurised gas to come into contact with any part of your body. · Always switch off the ANGEL when not in use. · Always fit a barrel blocking device to your ANGEL when not in use on the field of play. · Always remove all paintballs from the ANGEL when not in use on the field of play. · Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL before disassembly. · The ANGEL can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed. Always discharge the marker in a safe direction to relieve this residual gas pressure. · Always remove first stage regulator and all residual gas pressure from the ANGEL for transport and storage. · Always follow warnings and guidelines given with your first stage regulator for safe transport and storage. · Always store the ANGEL in a secure place. · THIS OPERATOR MANUAL MUST ALWAYS ACCOMPANY THE PRODUCT IN THE EVENT OF RESALE OR NEW OWNERSHIP. · SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.

Replacing the Battery/Switching Your ANGEL ON/OFF

REPLACING THE 9v (PP3) Battery

OPERATION

SWITCHING ON YOUR ANGEL • Ensure the isolator switch is in the OFF position.

• Remove the left & right hand grip cheeks 1 by removing the 6 M4 screws 2 using a suitable 2.5 mm Allen Key.

• Carefully lift the battery 3 from its housing if a battery is already present. • Observe the battery polarity as marked on the battery housing and the battery. • Insert a good quality fresh battery 3.

IMPORTANT NOTES: • We recommend the use of good quality 9v (PP3) batteries such as those produced by Duracell ™. • Batteries that leak may cause damage to the electronics. • Re-chargable batteries may be used but must be charged…