WARRANTY INFORMATION
WARRANTY: LIMITED 90 DAY WARRANTY (ORIGINAL PURCHASE RECEIPT REQUIRED)
For 90 days from date of purchase, Viewloader® will repair or replace this loader free of charge if defective in material or workmanship. This warranty gives you specific legal rights. You may also have other rights which may vary from state to state. Service is available from authorized Viewloader® Service Centers. A list of these is available at Viewloaders’s website at www. viewloader.com or by calling Viewloader® at 1-877-877-GAME (4263). These Service Centers generally offer the quickest service. If you would rather return your loader to Viewloader® please call customer service at1-877-877-GAME (4263) for return authorization number and shipping address. (Authorization number must be visible on outside of shipping package to be accepted.) Do not return any products via non-trackable services such as regular mail or parcel post. Such products may become lost and Viewloader® Inc. will not be responsible for replacement.
PAINTBALL LOADERS OUT-OF-WARRANTY
Authorized Service Centers will gladly repair any markers out of warranty for a nominal charge to cover parts and labor. Repairs made by Service Centers will usually be faster and less expensive than those sent back to the factory. Go to www.viewloader.com/service for service center locations near you. Prior to shipping out of warranty markers, you must first call customer service at 1-877-877-GAME (4263) for return authorization number and shipping address. (Authorization number must be visible on outside of shipping package to be accepted.) Any out of warranty Vlocity® returned to Viewloader® must be shipped prepaid and include the repair fee. Please call the Customer Service number for current repair fees. Viewloader® will repair or replace the loader with a reconditioned unit of the same model. If payment is not included, you will be billed for the repair fee plus a $4.00 invoicing fee. Upon receipt of payment, the loader or its replacement will be shipped to you. In the event that the loader includes no means of contacting the sender or no payment for repairs is received within 60 days of billing, the ownership of the loader will be forfeited and it will be disposed of at the discretion of Viewloader®.
OWNER’S MANUAL Select Force™ Electronic Loader U.S. PATENT NO. 5816232 OTHER PATENTS PENDING
OPERATION INSTRUCTIONS
This Manual Contains: • Warranty Information • Maintenance Instructions
Power Capacity Activation Feed Rate
The XSV Vlocity® Select Force™ loader iincludes a state of the art Lithium Ion battery kit that includes 2 nine volt sized cells, a wall charger, car charger,and charging pedestal. Please follow the provided battery instructions for best performance. NOTE: Lithium Ion batteries perform at their best after 3-4 cycles of charge and discharge. NOTE: Even though this loader comes with the latest technology in rechargeable batteries we have also designed the loader to perform with standard alkaline batteries. (See the low-battery section for details)
• Operating Instructions • Annotated Diagram
SPECIFICATIONS
18 volts Approx. 180 paintballs (.68 cal) 4 eye IR circuit Select Force™ feed on marker, up to 27bps.
(Diagram B)
The patented Vlocity® loader has Select Force™ technology with adjustable settings. The Select Force™ Options are OFF – and 4 divisions of force from low to high. All Vlocity® loaders also have Auto Anti Jam.
WARNING: NEVER SHOOT AT ANYONE WITHOUT PROPER
PROTECTIVE EQUIPMENT FOR EYES, EARS, THROAT AND HEAD, WHICH MUST BE WORN AT ALL TIMES. EYE PROTECTION MUST BE DESIGNED SPECIFICALLY FOR PAINTBALL USE. FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS MAY RESULT IN BODILY INJURY INCLUDING BLINDNESS AND DEAFNESS.
Step 1. Insert Batteries: Remove battery door screw. Slide battery door forward (see arrow) to remove. Move dual 9 volt battery harness outside the battery area and attach two new 9 volt or 9.6 volt NiMH batteries. Place batteries attached to harness into compartment. Replace door into grooves on shell halves. Replace screw to hand tight. Set low battery mode. Step 2. Install Loader: Press the neck portion of the loader into the feedport or elbow of the paintball marker as shown in direction of arrow and orient so the lid is to the rear of the marker. The neck is designed to fit most common paintball markers. The fit should be firm and tight.
DIAGRAM B DIAGRAMA B SCHEMA B BATTERY DOOR COMPUERTA DE LA PILA COUVERCLE DU COMPARTIMENT A PILES
FLIP LID TAPA BASCULANTE COUVERCLE MOBILE
GREEN indicates Lithium Ion battery usage. RED indicates alkaline battery usage. If the battery usage light does not match the actual batteries being used, push the micro switch to change it to match. Turn the power switch “OFF” so that the electronics now know what kind or batteries you are using. NOTE: Repeat the process every time new or freshly charged batteries are installed to “reset” the low battery recognition software. If you are using Lithium Ion batteries the low battery light will flash red when it is time to recharge. One flash in tension mode indicates 50% battery used. Two flashes in tension mode indicates 65% battery used. Three flashes in tension mode indicates 75% battery used. If youi are using alkaline batteries the low battery light will turn solid red to indicate low battery voltage. Removable/upgradeable Control Chip: Setting Select Force™ modes: Step 1. Turn loader power to on. Block vision system with finger or paintballs. Press and hold microswitch switch till LED flashes orange. The flashes indicate current Select Force™ mode. If you continue to hold the microswitch the LED will cycle flashes in Selct Force™ modes. Once the microswitch is released the Select Force™ mode is set until changed. Made Lock: The Mode is locked until changed by the player. Turning off / on the unit will not change locked tension mode. Modes: 1 flash, no force for extended battery life and use with old or brittle painballs 2-3 flashes, increasing…
The first 964 words, extracted from the PDF. Read the full manual above, or download it.