Shocker Sport
Manual
Includes: Shocker Sport 4X4 TM and Shocker Sport TurboTM
WARNING! The Shocker SportTM Paintball Marker is not a toy. Misuse or careless use may cause serious injury or death. The user and any person within range must wear eye protection designed for paintball use. Recommended at least 18 years old to purchase, 14 years old to use with adult supervision, or 10 years old to use on paintball fields meeting ASTM standard F1777-97. Read operation manual before using. Always use barrel plugs when not involved in actual play. When gassing and de-gassing the marker’s system, never aim the gun at another person. Always point the barrel towards the ground. Never use over-filled CO2 bottles as this will “spike” the system causing the hoses to burst. Shocker Sport™ Limited Warranty Smart Parts warrants for 1 year to initial retail purchaser that the Shocker Sport™ paintball marker and regulator are free from defects in materials and workmanship. Disposable parts (batteries, o-rings, seals, etc) are not warranted. The fill poppet and firing piston are warranted for six months. The solenoids and electronics on your Shocker Sport™ are unconditionally warranted for six months, plus an additional warranty of six months for electronic parts only (installation and labor are not included.) This warranty does not cover surface damages (scratches and nicks,) misuse, or improper disassembly and re-assembly, or attempts made to drill holes or remove metal from the external surfaces, which could result in degrading the performance and reducing pressure safety factors. Do not use Teflon tape on any part of this marker--the tape can break off and plug the solenoids. Instead, use Loctite 271. Do not make changes to the basic marker parts without written approval. The only authorized lubricant for the gun is DOW 33 Lubricant. Use of any other lubricant could result in voiding your warranty. Use only those “on/off” switches purchased from Smart Parts. Unauthorized “on/off” switches will void this warranty. This warranty is limited to repair or replacement of defective parts with the customers to pay shipping costs. This warranty is effective only if the customer returns the warranty registration card enclosed with the marker.
Thank you for purchasing the Shocker Sport. The Shocker Sport is the culmination of years of research and testing. Engineers at Smart Parts, building on their experience with the original Shocker, have given the Shocker Sport a complete overhaul to keep up with the demands of today’s players and the quality you expect from Smart Parts, Inc. We’ve made the Shocker Sport smaller, lighter and faster than the original Shocker while keeping the low pressure, accuracy and extremely low ball breakage! In addition, we’ve upgraded the electronics, wiring and grounding to make the marker more reliable. The Shocker Sport now incorporates a digital circuit board, redesigned bolt assembly, new solenoid valves and an optional integrated air assist port.
THE BASICS The Shocker Sport 4x4 and Turbo consist of three main assemblies: the Body, the Solenoid Housing, and the Grip Frame.
Body The Body is two interlinked systems, the Bolt and the Firing System. It also includes an air transfer port and air assist fitting port. The Bolt is contained in the upper chamber and should only be removed when the gun is degassed. The Bolt is operated by the rearmost solenoid controlling the air going to the front and rear of the bolt piston in order to make it travel back and forth. The bolt’s function is to load the paintballs into the breach of the gun and to transfer the air from the firing system to the ball in order to propel it. The firing system contains three main moving parts: the firing piston, the fire rod and the fill poppet. The firing system is controlled by the foremost solenoid valve which when activated starts the firing cycle. The firing piston and fill poppet are contained in their respective housings. NOTE: The firing piston also contains a glide ring that is split to facilitate assembly. The air transfer port distributes air to the entire gun and has 1/8" N.P.T. ports at the front and rear of the gun. This also contains a gun filter. Clean the filter every six (6) months with alcohol. The air assist fitting port is where the 10-32 air fitting is screwed into for the optional air assist elbow. It is located on the right-hand side of the gun.
Solenoid Housing The solenoid housing serves three functions. First it encloses and protects the solenoids, secondly it holds the circuit board and third it connects the body and the grip frame. The solenoid housing is held to the body using four 10-32 Phillips head cap screws. It is important not to over tighten these screws as thread damage may occur. The circuit board is mounted to the solenoid housing using screws and should not be removed or adjusted. The circuit board is coated with a water-repellent coating to prevent problems in wet playing conditions. The timing of the gun is preset at the factory. A small green LED is located on the side of the solenoid housing. This is the battery life indicator. It will light up continuously when the battery needs replaced. In front of the LED light is the on/off battery switch. This switch acts as the gun’s safety. If you have purchased a Shocker Sport Turbo, your solenoid housing will have a 3-way switch protruding from the front of it. This is the Selective Mode switch. It allows you to select between Semi-Automatic and Turbo. With the switch in the center position the gun is in SemiAutomatic mode, the gun shoots once per trigger pull. Moving the switch to the left or right position when you are facing the back of the gun sets Turbo mode. Two switch covers are provided with the Shocker Sport, the tournament cover does not allow the modes to be changed during play. The recreational cap is exposes the switch to allow changing modes during play.
The first 996 words, extracted from the PDF. Read the full manual above, or download it.