GEN 5 INTIMIDATOR
VICE & PROTÉGÉ MANUAL VERSION 2.0
BOB LONG TECHNOLOGIES 209-293-4440 www.boblongdirect.com
CONTENTS
Contents 2
Warning 3
Warranty 3
Quick Start 4
Installing Air Tank 4
Turning Marker On/Off 4
Adjusting Velocity 4
Turning Eyes on/off 4
Generation 5 model differences: 5
Maintenance Schedule 5
Adjusting the Trigger 6
Replacing/Upgrading 6
Adjusting the ASA (front/Back) 7
Maintaining the Eyes and Detents 8
Maintaining the HPR 9
Setting HPR pressure 10
Setting LPR Pressure 10
Maintaining the LPR 11
Maintaining the Poppet Valve assembly 12
Maintaining the bolt 13
Maintaining the Ram 13
O-Rings and Fasteners 14
O-rings 14
Fasteners 15
O-Ring Size Table 16
Troubleshooting Guide 20
CAUTION: READ ALL WARNINGS BEFORE USING OR ATTEMPTING ANY WORK ON YOUR VICE. SHOULD YOU BE UNSURE AT ANY POINT, STOP AND SEEK PROFESSIONAL SUPPORT.
WARNING
This paintball marker is not a toy. Misuse or mishandling can result in serious injury or death. Every person within range of a loaded paintball gun must wear eye protection specifically designed for paintball. It is recommended at least 18 years of age to purchase, 14 years old to use with adult supervision or 10 years old to use on paintball fields meeting ASTM standards F1777-97. Ensure you read the entire instruction manual before operating your marker. WARRANTY Bob Long Technologies warrants our paintball markers to be free from defect in materials and workmanship for a period of 1 year from purchase date. This warranty will only be honored for the initial retail purchaser and is nontransferable. Wear items such as batteries and seals are not covered under warranty. Main PCB, electropneumatic solenoid, eye PCB’s and wire harnesses will be covered under warranty for a period of 6 Months from purchase date. This warranty does not cover: > Any system failure resulting from the use of a non-authorized propellant. The only authorized propellants are nitrogen or compressed air. > Damage to electro-pneumatic solenoid resulting from external air source regulation failure. The use of an external regulated air source is your choice, so research well and choose wisely. > Damage to electro-pneumatic solenoid from foreign objects, specifically Teflon® tape. > Surface damage such as scratches, nicks, or dings. > Improper disassembly or re-assembly. > Improper lubrication. The only authorized grease for maintaining a Bob Long marker is Molykote® 55 made by the Dow Corning Corporation (Dow 55). Authorized oil is limited to Tri-flow® or any other synthetic oil made specifically for maintaining a paintball marker. > Modification or any other alteration of a marker or its parts. Dremels, acid, most things involving a show on the Bravo network or HGTV fit in this category. > Misuse of any conceivable kind. Basically if it involves law enforcement officers, the phrase “I hope we don’t get caught!”, use as a pry bar, or other things that would have made it into an episode of the show Jackass. This warranty is limited to repair or replacement of defective items with the initial retail purchaser to pay shipping costs. The initial retail purchaser must enclose a copy of the original sales receipt with the marker to be repaired for this warranty to be honored. CAUTION: READ ALL WARNINGS BEFORE USING OR ATTEMPTING ANY WORK ON YOUR VICE. SHOULD YOU BE UNSURE AT ANY POINT, STOP AND SEEK PROFESSIONAL SUPPORT.
Extracted from the PDF. Read the full manual above, or download it.