BOB LONG TECHNOLOGIES Mokelumne Hill, CA
[email protected] www.boblongdirect.com
CONTENTS
Contents 2
Warning 3
Warranty 3
Quick Start 4
Powering On Marker 4
Installing Air Tank 4
Turning Eyes On/Off 4
Adjusting Velocity 4
Adjusting the Trigger 5
Removing/Replacing Trigger 5
Maintenance 6
Maintaining the Eyes and Detents 7
Maintaining the HPR (In-Line-Regulator) 8
Maintaining the LPR 9
Setting HPR Pressure Error! Bookmark not defined.
Setting Initial LPR Pressure 10
Setting Pressures if No Pressure Tester is Available 10
Setting Pressures Using the Pressure Tester 11
Maintaining the Engine 12
Removal of the ASA 13
O-Rings and Fasteners 14
O-Rings 15
O-Rings 16
Fasteners 17
CAUTION: READ ALL WARNINGS BEFORE USING OR ATTEMPTING ANY WORK ON YOUR VICTORY. SHOULD YOU BE UNSURE AT ANY POINT, STOP AND SEEK PROFESSIONAL SUPPORT.
Troubleshooting Guide 20
WARNING
This Paintball Marker is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically for Paintball must be worn by user and any other persons within 200 yards (183 meters) of this Marker. Must be at least 18 years old to purchase, at least 14 years old to use or operate under adult supervision, 10 years of age or older to use or operate on insured Paintball fields meeting ASTM-standard F1777-97. Read owner’s manual prior to using or operating this Paintball Marker. . WARRANTY Bob Long Technologies warrants our paintball markers to be free from defect in materials and workmanship for a period of 1 year from purchase date. This warranty will only be honored for the initial retail purchaser and is nontransferable. Wear items such as batteries and seals are not covered under warranty. Main PCB, electropneumatic solenoid, eye PCB’s and wire harnesses will be covered under warranty for a period of 6 Months from purchase date. This warranty does not cover: > Any system failure resulting from the use of a non-authorized propellant. The only authorized propellants are nitrogen or compressed air. > Damage to electro-pneumatic solenoid resulting from external air source regulation failure. The use of an external regulated air source is your choice, so research well and choose wisely. > Damage to electro-pneumatic solenoid from foreign objects, specifically Teflon® tape. > Surface damage such as scratches, nicks, or dings. > Improper disassembly or re-assembly. > Improper lubrication. The only authorized grease for maintaining a Bob Long marker is Molykote® 55 made by the Dow Corning Corporation (Dow 55). Authorized oil is limited to Tri-flow® or any other synthetic oil made specifically for maintaining a paintball marker. > Modification or any other alteration of a marker or its parts. Dremels, acid, most things involving a show on the Bravo network or HGTV fit in this category. > Misuse of any conceivable kind. Basically if it involves law enforcement officers, the phrase “I hope we don’t get caught!”, use as a pry bar, or other things that would have made it into an episode of the show Jackass. This warranty is limited to repair or replacement of defective items with the initial retail purchaser to pay shipping costs. The initial retail purchaser must enclose a copy of the original sales receipt with the marker to be repaired for this warranty to be honored.
Extracted from the PDF. Read the full manual above, or download it.