STEP 1: degas your gun and remove your old Clone 5 drive
unscrew
STEP 2: Unscrew the drive cap as shown, keeping the spring, detent and drive cap/cover assembly keep these and set the rest aside
STEP 3: make sure the spring carrier is in place as shown, and install the spring and detent as shown
screw on
CLONE 5 INFINITY DRIVE - Infinity Drive assembly - spare bolt tip - spare bolt switch o-ring (ORM16-2) Part code: X5IDUK This upgrade kit assumes you have a complete Clone 5 drive, as some parts are re-used (drive cap, drive cover, detent and spring) macdevpaintball.com
spring carrier
spring detent
STEP 4: Screw the back cap and cover assembly in place. The cover should click up and down as usual Now your drive is ready to use!
Detent
INFINITY DRIVE PARTS Spring carrier
Spring
OR14 Bolt ORM17 Keg
OR16 Bumper
Valve cap
Bolt tip
Need help or spares? Visit macdevpaintball.com for all spares, and to contact a tech.
Extracted from the PDF. Read the full manual above, or download it.