The transmitter kit is designed to work with the Magna Drive loader or an upgraded Halo B, Reloader B (all models) with the RF upgrade circuit board.
Attaching the RF transmitter to your marker The transmitter kit comes with 3 different harnesses. Some newer markers might have a connector on the circuit board for easy installation. In most other applications, simply use one of the harnesses and plug in it between your solenoid and your markers circuit board.
If you are not able to use one of the 3 supplied harnesses, it might be necessary to solder one of them to your marker. We recommend that you have Paintball Airsmith solder the transmitter to your marker. It is possible to damage your marker/transmitter electronics if not done properly.
Attaching the RF transmitter to your marker
The transmitter kit comes with 3 different harnesses. Some newer markers might have a connector on the circuit board for easy installation. In most other applications, simply use one of the harnesses and plug in it between your solenoid and your markers circuit board.
Paintball Solutions 570 Mantua Blvd. Sewell, NJ 08080 800-220-3222 www.paintballsolutions.com
See the Magna Drive Loader or the RF Circuit Board instructions for detailed operational info.
You will notice that the transmitter has 3 prongs coming out of it. Simply plug the transmitter into the harness. It does not matter which way it is plugged in, it will work in either direction.
Attaching the Transmitter to the harness
Extracted from the PDF. Read the full manual above, or download it.