BACK COVER BLANK
• Owner’s Manual • Manual del Usuario
PROJECT SALVO TM
PROJECT SALVO
PLAY.. SMART... PLAY.. STRONG... ARMY.. STRONG SMM
TP04603 Rev Date 05-09
WARNING E N G L I S H
E S P A Ñ O L
THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE, FACE AND EAR PROTECTION DESIGNED FOR PAINTBALL MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. WE RECOMMEND AT LEAST 18 YEARS OLD TO PURCHASE. PERSONS UNDER 18 MUST HAVE ADULT SUPERVISION WHEN USING THIS PRODUCT. READ THE OWNER’S MANUAL BEFORE USING THIS PRODUCT.
WARNING SAFETY IS YOUR RESPONSIBILITY READ, FAMILIARIZE YOURSELF AND ANY OTHER USER OF THIS MARKER WITH THE SAFETY INSTRUCTIONS ALWAYS KEEP IN THIS MANUAL. TRIGGER SAFETY FOLLOW THESE IN SAFE MODE INSTRUCTIONS WHEN UNLESS FIRING USING, WORKING ON, AS DETAILED IN TRANSPORTING OR INSTRUCTIONS STORING THIS MARKER. ON PAGE 4.
ALWAYS KEEP THE BARREL BLOCKING DEVICE INSTALLED WHEN NOT IN SHOOTING SITUATION, SEE INSTRUCTIONS ON PAGE 2.
ADVERTENCIA
ESTO NO ES UN JUGUETE. UN USO INAPROPIADO PUEDE CAUSAR SERIAS HERIDAS O LA MUERTE. OJOS, CARA Y OIDOS DEBEN ESTAR PROTEGIDOS TODO EL TIEMPO, CON LA PROTECCIÓN DISEÑADA PARA PAINTBALL TANTO PARA JUGADORES COMO PARA CUALQUIER PERSONA QUE ESTE EN EL RADIO DE ALCANCE. RECOMENDAMOS AL MENOS 18 AÑOS DE EDAD PARA LA COMPRA Y USO. LAS PERSONAS MENORES DE 18 AÑOS DEBEN USAR ESTE PRODUCTO BAJO LA SUPERVISIÓN DE UN ADULTO. ANTES DE USAR ESTE PRODUCTO LEA EL MANUAL DEL USUARIO.
LA SEGURIDAD ES SU RESPONSABILIDAD EL PROPIETARIO Y TODA PERSONA QUE UTILICE ESTE MARCADOR DEBE LEER Y FAMILIARIZARCE CON MANTENGA SIEMPRE LAS INSTRUCCIONES DE EL SEGURO DEL SEGURIDAD EN ESTE GATILLO ACTIVADO MANUAL. SIGA LAS A MENOS QUE SEA INSTRUCCIONES DE NECESARIO HACER USO, MANTENIMIENTO, DISPAROS. COMO TRANSPORTE Y SE VE EN LAS ALMACENAJE DE INSTRUCCIONES ESTE MARCADOR. DE LA PÁGINA 3.
MANTENGA EL MECANISMO DE BLOQUEO DEL BARRIL INSTALADO CUANDO NO ESTE HACIENDO DISPAROS COMO SE ILUSTRA EN LA PÁGINA 1.
E N G L I S H
PROJECT SALVO E TM
WARNING KEEP THE BARREL BLOCKING DEVICE INSTALLED EXCEPT WHEN YOUR MARKER IS IN USE. ALWAYS MAKE SURE THAT THE TRIGGER SAFETY IS IN THE SAFE MODE (SEE INSTRUCTIONS ON PAGE 4) AND THE BARREL BLOCKING DEVICE IS PROPERLY INSTALLED ON YOUR MARKER ACCORDING TO THE INSTRUCTIONS TO PREVENT DAMAGE TO PROPERTY, SERIOUS INJURY OR DEATH.
BARREL BLOCKING DEVICE INSTALLATION INSTRUCTIONS 1) Insert the barrel blocking device into the barrel (or over the barrel, depending on the style of barrel blocking device) and loop the cord over the top of the receiver and position at the back of the grip as shown. Barrel Blocking Device
Barrel Blocking Device
2) Adjust the cord length retainer up to the back Cord Length of the grip by pulling the cord through it until the Retainer retainer is snug against the back of the grip. Keeping the cord as tight as possible, leave just enough cord elasticity to pull the cord/retainer up over the top of the marker to remove the barrel blocking device for firing. 3) After the cord length is properly adjusted, lock the cord length by tying a knot in the cord against the back of the retainer as shown. 4) Before and after playing, inspect the barrel blocking device and replace if bag, plug, or cord damage, or loss of cord elasticity is found. 5) Clean the barrel blocking device with plain, warm water and store out of sunlight in a dry area when not in use. 2
2955 Adams Center Road, Fort Wayne, IN 46803 USA P) 260-749-6022 • F) 260-749-6619 • www.tippmann.com
CONGRATULATIONS on your purchase of a U.S. ARMY Project Salvo paintball marker. We believe our Project Salvo markers to be the most G accurate and durable paintball markers available, and are proudly L manufactured by Tippmann . All Project Salvo markers will provide many I years of dependable service if cared for properly. Visit www.usarmypaintball.com and find out how to maximize your paintball S experience – play smart... play strong...Army StrongSM. H Please take time to read this manual thoroughly and become familiar with your Project Salvo marker’s parts, operation, and safety precautions before you attempt to load or fire this marker. If you have a missing or broken part or need assistance, please contact Tippmann Consumer Relations at 1-800-533-4831 for fast friendly service. TABLE OF CONTENTS
Warning/Caution 2
Warning/Caution Barrel Blocking Device Installation 2
Warning/Liability Statement 4
Safety is your Responsibility / Familiarize Yourself With Safety 4
Safe Mode = Turning The Safety On (PUSH SAFE) 4
Fire Mode = Turning The Safety Off (PUSH FIRE) 4
Getting Started 6
1. Prepare Marker for Air Supply Cylinder Installation 6
2. Air Supply Cylinder Installation 7
3. Hopper Installation 8
4. Velocity Adjustment 8
Specifications 9
Schematics 10
Unloading Your Marker 12
Air Supply Cylinder Removal / Air or CO 2 Cylinder Safety Tips 12
Repairing Air Supply Leaks 15
Cleaning & Maintenance 15
Storage 15
Marker Disassembly / Assembly 16
Warranty Information, Registration and Repairs 20
Extracted from the PDF. Read the full manual above, or download it.