Piranha Blackmaxx Diagram - Spanish

Feed Port:

.68 CALIBER SEMI AUTOMATIC PAINTBALL MARKER OPERATOR’S MANUAL Paintball is a recreational and competitive sport played worldwide. Special equipment used in paintball includes paintball markers, which are airguns; and paintballs, which are liquid-filled gelatin capsules that mark with a bright color. The object of the game is to capture the opposing team’s flag; while on that quest, players try to mark their opponents to eliminate them from the game.

Paintballs:

for use only with standard “.68 caliber” (.68-in. diameter) paintballs

Power source:

accepts standard connections for CO2, regulated N2,or regulated compressed air

Operating pressure:

recommended 650 p.s.i. to 1000 p.s.i.

Input pressure:

1000 p.s.i. Do not exceed recommended input on operating pressure

Power source input:

bottom line adapter; accepts standard threading

molded .45 style

Safety:

rotating mechanical

READ THIS OPERATOR’S MANUAL COMPLETELY BEFORE LOADING, PRESSURIZING, OR OPERATING THE PMI BLACKMAXX™ PAINTBALL MARKER.

PE SPARE AIR INSTALLATION This operator’s manual is provided with several models of the PMI BlackMaxx™ paintball marker. Pursuit Marketing, Inc. (PMI, Inc.), reserves the right to modify or change its markers without incurring any obligation to incorporate such modifications or changes in any of its products that were sold prior to the modification. The information in this operator’s manual may be updated or changed without notice.

1. Receiver 2. Barrel 3. Bolt 4. Front Cowl 5. Barrel O-ring 6. Screen Filter 7. Tank O-ring 8. Valve spring 9. Valve Guide 10. Cup Seal 11. Sight Screw

12. Ball Detent 13. Cowl Pins 14. Sear 15. Front Pivot Pin 16. 7 in. Hose 17. Grip Frame 18. Hammer O-ring 19. Hammer 20. Hammer Spring 21. Spring Guide 22. Bolt Pin

23. Velocity Adjust O-ring 10460 24. Velocity Adjust Screw 10026 25. Brass Valve Base 77108 26. Front Bolt O-ring 77109 27. Bolt O-rings 77106 28. Eliptical Locking Switch 77107 29. Safety Switch 77130 30. Trigger 77104 31. Sight Housing 77105 32. Latch Pin 77152 33. 3K Burst Disk 41026

OPERATING THE PMI BLACKMAXX™

PAINTBALL MARKER

1. Attach threaded barrel firmly to marker. 2. At this time, do not attach power source or loader and do not load paintballs into marker. 1. Unthread reusable adapter from Spare Air Cartridge.

3. Insert barrel plug firmly into barrel. 4. Pull the cocking knob straight back from the rear of the marker until the cocking mechanism locks back in the cocked position. Push cocking knob back into original position. Figures 1 and 2. Push the Safety Switch forward into the Shoot Position. Figures 3 and 4.

This operator’s manual is intended to remain with the paintball marker upon any subsequent transfer of the marker, whether through sale, resale, or furnishing in any manner. An updated and replacement operator’s manual may be obtained from: Pursuit Marketing, Inc., 55 Howard Ave, Des Plaines, IL 60018 USA; phone 800.579.1633; www.buypmi.com. Questions about the operation of the PMI BlackMaxx™ paintball marker may be directed to Pursuit Marketing, Inc. or visit www.buypmi.com for updates regarding your PMI BlackMaxx™ purchase.

5. Squeeze the trigger with an even pressure. You will hear the hammer snap forward. Return the Safety Switch to the No Shoot Position. 6. Attach feed tube elbow and empty loader. If the feed tube elbow is difficult to attach, run hot water over the elbow or soak it in hot water for one minute, which will help the elbow expand for easier attachment. When the elbow cools, the snug fit will help the loader remain in position.

Disposable Cartridge

Reusable Adapter

7. Cock the marker. 2. Screw adapter into marker. Be sure it is securely tightened.

3. Thread cartridge into adapter until completely pierced.

8. Attach CO2 source to bottom line adapter, ensure safety is in No Shoot position (see Figure 3 below). 9. Load paintballs into the hopper.

STATEMENT OF LIABILITY This PMI BlackMaxx™ semi-automatic paintball marker is surrendered by Pursuit Marketing, Inc. (PMI, Inc.), with the express understanding that the purchaser assumes all liability arising out of any unsafe handling of this marker or any action that violates any applicable laws or regulations. PMI, Inc., assumes no liability for, and shall not be responsible for, any personal injury or loss of property or life resulting from the use of this paintball marker under any circumstances, including but not limited to those resulting from intentional, reckless, negligent or accidental discharges.

Figure 1 Pull Back

Figure 2 Fully Cocked

Figure 3 no shoot position

WARNING

Safety Device Figure A.

Your PMI Marker has a specially designed pressure release system installed. See Figure A. DO NOT REMOVE OR ALTER THIS SAFETY DEVICE! This safety device will not allow pressures in excess of 3000 psi to enter your marker. If the output pressure of your air system exceeds 3000 psi the safety release disc will vent, preventing damage to your marker. Should this occur, replace the rupture disc using only PMI Replacement Kit #41022 rated at 3000 PSI. Contact your local paintball dealer to perform this maintenance or contact PMI at 1.800.579.1633 for further information.

READY FOR USE

DO NOT REMOVE CARTRIDGE UNTIL EMPTY

WARNING 4. When done playing, slowly unthread cartridge from adapter.

WARNING THE PMI BLACKMAXX™ PAINTBALL MARKER IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE PROTECTION DESIGNED FOR PAINTBALL USE MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. READ THIS OPERATOR’S MANUAL COMPLETELY BEFORE LOADING, PRESSURIZING, OR OPERATING THE PMI BLACKMAXX™ PAINTBALL MARKER.