HATER PAIN TBALL “HATRED PM7/PMR Board” HATRED Software Version 4 Instruction Manual Featur es:
Designed from the ground up for the Proto Matrix 7 and Proto Rail. The first ever paintball circuit board with a fully integrated wireless transceiver! Fully compatible with all SYMBIO wireless products. Includes 22 firing modes including fully customizable ramp modes. Proprietary multi-tasking algorithms continuously monitor all trigger and eye events to ensure that all pulled shots register and are processed. TEN TIMES faster than the top-ranked competitor! This translates to 900,000 more operations per second than anyone else. Fully adjustable ABS features add to the marker’s dwell to eliminate that pesky first shot drop-off. Anti-mechanical bounce (AMB) algorithms solve the problem of physical switch bounce. No need to worry when the refs pull that old slow trigger pull trick on your gun. A “forced shot” feature allows the user to clear the marker of eye faults. Instant on feature. After all, you wanna play now! Instantaneous battery status. Tournament lock feature allows the user to “lock out” the programming mode in order to meet specific field/tournament guidelines. Ready to accept Nicky Cuba’s signature series NUSKOOL software upgrades.
will see a flickering GREEN or RED led. The GREEN indicates a good battery and the RED means replace the battery as soon as possible. Regardless of GREEN/RED battery indication, your marker WILL REGISTER YOUR FIRST TRIGGER PULL! Please be careful! Power Off: To turn the marker off, press and hold the power button until the LED goes through a rainbow power down sequence. Please note that this particular rainbow LED sequence does NOT indicate that you’re entering the programming menu.
Pr ogr ammi ng The bottom dip switch must be in the OFF position in order to enter the programming menu. If the bottom dip switch is ON, “tournament lock” will be enabled and the user will be unable to program the marker. To enter the programming menu, hold the trigger down and THEN turn the marker on. The LED will inform the user that the programming mode has been accessed by flashing several colors rapidly.
LED Color
Setting
Purple Green Red Blue Teal
Fire Mode Debounce Dwell Max ROF AMB
Yellow White
Eye Delay Wireless Address ABS
Flickering Purple Flickering Green Flickering Red Flickering Blue 1.) 2.) 3.)
Instal l ati on: MAKE SURE THE MARKER IS NOT CONNECTED TO AN AIR SOURCE AND DOES NOT HAVE PAINTBALLS IN THE BREACH DURING INSTALLATION!!!!!! 1. 2. 3. 4. 5. 6.
Remove the screws that secure the grips. This will expose the board. Unplug the eye ribbon, solenoid wires, and power wires. Wiggle your old board out. Slide your new HATRED board in. It’s purposely a tight fight so you may have to use some force. Plug in your eye ribbon, power, and solenoid wires. Replace grips.
Pow er : Power On: The HATRED board comes equipped with an Instant On feature. Simply press the power button (top button) and your marker will instantly power on. As long as the power button is depressed, you
Default Setting 1 5 ms 18 ms 20 cps 1 ms (1 = AMB Disabled) 4 ms 1
Adjustable Range 1-22 1-50 ms 5-35 ms 10-35 cps 1-60ms
Ramp Activation Ramp Percent
Reset Defaults
Pulling and releasing the trigger will allow the user to toggle through the different programming options. Once the desired setting/LED color is reached, pull and hold the trigger to select that setting. The LED will then go blank. Once the LED goes blank, pull the trigger for the desired setting. For example, if the user wishes to set the debounce to 2, he or she must pull the trigger two times. ➠If the user wants to view their current value for a particular setting, he or she need only to continue holding the trigger in after the setting is selected from the menu. The software will then blink back the user’s current value for that particular setting. The software will indicate that the new value has successfully been entered by blinking the value back to the user then rapidly flashing the LED through a spectrum of colors. ➠As the software blinks back the new setting, the user may abort this process by simply clicking the trigger once. The new settings will still be saved. After a setting has been changed, the user may change another option or power the gun off to save the settings.
NOTE: All “programming clicks” correspond exactly to their settings. If you want to cap the ROF at 15, pull the trigger 15 times. If the user sets the value too low (2 cps ROF cap for example), the software will automatically default to the lowest accepted value. The inverse is also true for user inputs which are beyond the adjustable range.
Pr ogr ammi ng Ex ampl es: To set the firing mode to PSP mode. 1. 2. 3. 4. 5. 6.
Turn the marker off. Hold the trigger down; then turn the marker on. Once the LED flashes many colors, release the trigger. Tap the trigger until the LED turns purple. Hold down the trigger until the LED goes blank. Tap the trigger two times. Once the LED flashes many colors, turn the marker off.
To set the eye delay to 5 ms. 1. 2. 3. 4. 5. 6.
Turn the marker off. Hold the trigger down; then turn the marker on. Once the LED flashes many colors, release the trigger. Tap the trigger until the LED turns yellow. Hold down the trigger until the LED goes blank. Tap the trigger 5 times. Once the LED flashes many colors, turn the marker off.
To set the max ROF to 15 bps. 1. 2. 3. 4. 5. 6.
Turn the marker off. Make sure the top dipswitch (dipswitch 1) is in the ON/UP position. Hold the trigger down; then turn the marker on. Once the LED flashes many colors, release the trigger. Tap the trigger until the LED turns blue. Hold down the trigger until the LED goes blank. Tap the trigger 15 times. Once the LED flashes many colors, turn the marker off.
Di p Sw i tch Setti ngs:
Switch 1 (top) 2 (bottom)
UP ROF Cap ON
DOWN ROF Cap OFF
Tournament Lock
Programming Mode
The first 1044 words, extracted from the PDF. Read the full manual above, or download it.