Brass Eagle Talon Ghost Manual - English

WARNING: THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE PROTECTION DESIGNED FOR PAINTBALL USE MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. RECOMMEND AT LEAST 18 YEARS OLD TO PURCHASE, 14 YEARS OLD TO USE WITH ADULT SUPERVISION, OR 10 YEARS OLD TO USE ON PAINTBALL FIELDS MEETING ASTM-STANDARD F1777-02. READ OPERATION MANUAL BEFORE USING. WARNING: NEVER SHOOT AT ANYONE WITHOUT PROPER PROTECTIVE EQUIPMENT FOR EYES, EARS, THROAT AND HEAD, WHICH MUST BE WORN AT ALL TIMES. EYE PROTECTION MUST BE DESIGNED SPECIFICALLY FOR PAINTBALL USE. FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS MAY RESULT IN BODILY INJURY INCLUDING BLINDNESS AND DEAFNESS.

1. Always wear proper eye, face and ear protection designed especially to stop paintballs. 2. Never shoot a person who is not wearing proper protection. 3. Treat every paintball marker as if it were loaded. 4. Never look down the barrel of the marker. 5. Never point the paintball marker at anything you don’t wish to shoot. 6. Keep the paintball marker on safe until ready to shoot. 7. Keep the barrel plug in the paintball marker’s muzzle when not shooting. 8. Always remove gas source before disassembly. 9. Store the paintball marker unloaded and degassed in a locked place. 10. Follow warnings listed on gas source for handling and storage. 11. Never use anything other than .68 caliber paintballs. 12. Do not shoot fragile objects such as windows. 13. Paintballs may cause staining of some porous surfaces such as brick, stucco and wood. 14. Always measure velocity before playing paintball. 15. Never shoot at velocities in excess of 300 feet per second. 16. Never engage in vandalism. 17. Do not use marker for drive-by shooting. 18. Do not modify your marker’s pressurized air system or cylinder in anyway.

OPERATING INSTRUCTIONS WARNING: Be sure the paintball marker is always pointed in a safe direction. Read the following operating instructions and WITHOUT LOADING ANY PAINTBALLS OR CO2 proceed several times through the operating steps with your paintball marker (dry fire the paintball marker at a safe target) so that you will be able to operate the marker properly and safely.

Step 3. INSTALL LOADER AND LOAD PAINTBALLS: 1) Press Elbow (Included) into ball feed port. Press loader into the elbow. (Fig D) 2) Pour paintballs into loader.. NOTE: Paintballs are gravity fed from loader to the marker each time the marker is cocked. Too rapid a rate of fire, broken balls or too many balls in loader may cause subsequent balls to break and will adversely affect the paintball marker’s accuracy. Use a squeegee to clean inside the paintball marker’s barrel. (RECOMMEND Brass Eagle®, Stryker™ or JT® brand .68 caliber paintballs.)

Welcome to the Brass Eagle® team and thank you for purchasing this high quality Brass Eagle® paintball marker. We at Brass Eagle® stand committed to providing you with the best product and service available. Your new marker is designed and manufactured to provide ease of maintenance with trouble free performance. We ask that you read this manual to obtain the maximum enjoyment of your purchase.

Call 1-877-877-GAME (4263) or visit www.brasseagle.com if you should need an illustrated parts list.

Step 4. ATTACH CO2 POWER SOURCE Marker can be used with Brass Eagle® 12 gram CO2 cylinders. Use piercing screw to install the CO2 cylinder (Fig E). Turn screw clockwise to tighten until cartridge has been pierced. DO NOT OVER TIGHTEN. WARNING: Use only CO2 cylinders which are 12 gram type. (Recommend Brass EagleTM 12 gram CO2 cylinders Item #7105, #7115 or #7125) Any attempt to use other sizes and/or cylinders containing other types of gas could be extremely dangerous. The use of gasses other than CO2 could result in an explosion or rupture of the marker, causing serious injury.

Brass Eagle

1201 S.E. 30th Street Bentonville, AR 72712, U.S.A. 877-877-GAME(4263) Fax: (479)464-8701 www.brasseagle.com Part No. 142597-000

Step 6. COCK: Cock marker by pulling pump arm completely back until you hear “click” (sound of sear engaging) (Fig H). Push pump arm completely forward until “click” is heard again (Fig I).

Marker Fails to Discharge

Marker is not Cocked

Cock Marker Pump Handle

Lack of Gas Pressure

Install New 12gm CO2 Cylinders

Gas Source Not Fully Engaged

Tighten Piercing Screw

Operating Temperature Too Cold

Operate in Warmer Temperature

Broken Paintball

Squeegee Out Paintball Fragments in Barrel Wait until it warms up

Barrel Plug Tapón del Cañón Bouchon de canon

Elbow Codo Coude

Safety Seguro Cran de sûreté

Barrel Cañón Canon

Pump Handle Manija de la Bomba Poignée de la pompe

FIGURE C

Sight Mira Viseur Trigger Gatillo Gâchette

CO2 Piercing Screw Tornillo Perforador del Suministro de CO2 Vis de perçage pour CO2

NOTE: The marker will not cock with the safety on.

FIGURE B

40 Round Hopper Tolva Redonda de 40 Chargeur 40 coups

Ball Feed Port Compuerta de Alimentación de Paintballs Entrée d’alimentation des billes

FIGURE A

Now anti-double feed feature is engaged and a second ball cannot be FIGURE I fed into chamber until the marker is fired. The Talon Ghost is a pump actuated marker, which needs to be pumped after firing to chamber the next paintball and to compress the hammer spring. The marker may not cock (sear may not engage) when the 12 gram CO2 is low on pressure or when there is no 12 gram CO2 cylinder installed. STEP 7. VERIFY VELOCITY: Verify that the paintball marker’s velocity is below 300 feet per second or less if required by playing field (ASTM standard F1777-02). Velocity should be measured with a chronograph prior to…