BT (Battle Tested) TM-7 Manual - English

13. General Maintenance 10

14. Assembly/Disassembly Instructions 10

15. Storage and Transportation 13

16. Troubleshooting Guide 14

17. Diagram and Parts List 17

©2010 Empire Paintball. The Empire Logo, “Battle Tested” and “TM-7” are trademarks of KEE Action Sports, LLC. All rights reserved. Covered by one or more of the following U.S. patents: U.S. patent nos. 5,881,707, 5,967,133, 6,035,843, 6,474,326, 6,637,421, 7,100,593, marked under license: 6,601,780, 6,925,997, 6,161,573, 6,057,750, 7.603,997, 7,610,908, and EPC Patented. Empire is a brand of KEE Action Sports, LLC.

18. Warranty Information 20

Authorized by Umarex, the worldwide exclusive H&K licensee for paintball products.

1. Rules for Safe Marker Handling

IMPORTANT: Never carry your TM-7 uncased when not on a playing field. The non-playing public and law enforcement personnel may not be able to distinguish between a paintball marker and firearm. For your own safety and to protect the image of the sport, always carry your TM-7 in a suitable marker case or in the box in which it was shipped. • Treat every marker as if it were loaded. • Never look down the barrel of a paintball marker. • Keep your finger OFF the trigger until ready to shoot. • Never point the marker at anything you don’t wish to shoot. • Keep the marker on “safe” until ready to shoot. • Keep the barrel blocking device in/ on the marker’s barrel when not shooting. • Always remove paintballs and propellant source before disassembly. • After removing air source, point marker in safe direction and discharge until Marker is degassed. • Store the marker unloaded and degassed in a secure place. • Follow warnings listed on the air source for handling and storage. • Do not shoot at fragile objects such as windows. • Every person within range must wear eye, face and ear protection designed specifically to stop paintballs and meeting ASTM standard F1776. • ­Always measure your marker’s velocity before playing paintball and never shoot at velocities in excess of 91.44 meters (300 feet-per-second).

READ OWNERS MANUAL BEFORE USING. 2. Introduction and Specifications

Congratulations on your selection of the TM-7 paintball marker. The TM-7 is made to provide you with many years of reliable performance. We are honored that you have chosen the TM-7 as your marker of choice and hope you enjoy using this high quality product. The patented Valve design, Slip Stream™ Solenoid, Hall Effect Sensor

Trigger, Four Position Selector Switch, set new standards for marker technology. The TM-7 is precision engineered from Aircraft grade Aluminum and Composite, to meet the demands of the most competitive players, teams, and climates. The ultimate intent of the TM-7 is to exceed your expectations. We expect you to play hard and play frequently and thus the TM-7 was built with this in mind. All internal parts, wear, and contact surfaces have been heat treated or hard anodized. The toughest and most resilient materials and components have been used in the construction of this marker. The TM-7 operates on Low-Pressure. The main operating pressure is 180-200 PSI. The pressure can be nominally adjusted and monitored visually via the gauge on the bottom-line regulator. There is no secondary regulator to worry about. TM-7 Specifications Model- TM-7 Barrel- 9“ Ported Barrel Caliber-68 Action- Semi Auto, Ramping, and Full Auto Air source- Compressed Air Battery- One 9 Volt Cycle Rate- 20 BPS Shell Material- Composite Main Body material- Aluminum Accuracy Range- 150ft + Weight– 2.5 lbs Included with your TM-7 - 9” Barrel (.691 bore) - Allen Keys - Spare Parts - Barrel Blocking Device - One 9 Volt Battery