GOG eNVy Manual - English

LUBRICANT:

For proper and consistent operation, the Vibe should only be lubricated with SL33K lubricating grease.

MAINTENANCE The Vibe has been designed with simplicity in mind so that you can concentrate on your game instead of your marker. It has a minimal number of moving parts and seals so that you can maintain the marker with little effort. This DOES NOT mean that you should neglect your marker. If you take care of it off the field, your Vibe will take care of you on the field. For best performance, clean and grease your Vibe frequently. Many players clean their marker after every use. While this may seem a bit extreme, being vigilant in the upkeep of your marker will extend its useful life considerably. Playing in the rain will not damage your Vibe, but you should NEVER immerse it in water. If your marker should become waterlogged, remove the barrel, body cover and rubber grips and allow them to dry out, then follow the disassembly instructions for full cleaning. Clean out mud and paint with a damp cloth and alcohol. Grease the Vibe ONLY with SL33K pneumatic grease. For best performance, use high quality paintballs.

www.smartparts.com

PLEASE READ CAREFULLY

While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for errors or omissions. Smart Parts, Inc. reserves the right to change the specifications of the Vibe at any time without prior notice. The latest version of this manual may be downloaded free of charge at www.smartparts.com.

V I B E WAR NI NGS

– THE VIBE IS NOT A TOY. – MISUSE OF THE VIBE MAY RESULT IN SERIOUS INJURY OR DEATH. – EYE PROTECTION SPECIFICALLY DESIGNED FOR PAINTBALL USE MUST BE IN COMPLIANCE WITH ASTM SPECIFICATION F1776 AND MUST BE USED BY THE USER AND ANYONE WITHIN RANGE OF THE VIBE. – WEAR EYE PROTECTON DURING DISASSEMBLY OR MAINTENANCE. – SMART PARTS RECOMMENDS THAT THE VIBE ONLY BE SOLD TO PERSONS 18 AND OLDER. – THOROUGHLY READ THE VIBE MANUAL BEFORE OPERATING. – TREAT EVERY PAINTBALL MARKER AS IF IT WERE LOADED. – NEVER LOOK DOWN THE BARREL OF A PAINTBALL MARKER. – KEEP YOUR FINGER OFF THE TRIGGER UNTIL READY TO SHOOT. – NEVER POINT THE VIBE AT ANYTHING YOU DON’T WISH TO SHOOT. – KEEP THE VIBE ON SAFE (POWER OFF) UNTIL READY TO SHOOT. – KEEP THE BARREL BLOCKING DEVICE ON THE VIBE’S MUZZLE WHEN NOT SHOOTING. – ALWAYS REMOVE PAINTBALLS AND DEGAS THE VIBE BEFORE DISASSEMBLY. – STORE AND TRANSPORT THE VIBE UNLOADED AND DEGASSED IN A SECURE PLACE. – FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS FOR PROPELLANT SOURCE HANDLING, STORAGE, AND FILLING. – DO NOT SHOOT FRAGILE OBJECTS SUCH AS WINDOWS. – ALWAYS MEASURE THE VELOCITY OF PAINTBALLS FIRED BY THE VIBE BEFORE USE, AND NEVER ADJUST TO FIRE ABOVE 300FPS (91.44 M/S.)