Instruction Manual
Table of Contents
SAFETY 1
COMPRESSED AIR ONLY 2
FAST START 3
FIRST TIME PROBLEMS 4
PERFORMANCE 4
LUBRICATION 5
VELOCITY ADJUSTMENT 5
CLEANING 5
PAINTBALLS 6
LOADER 7
NUBBIN 8
BLOW-OFF VALVE 8
ACCESSORIES 9
TECHNICAL SUPPORT 9
SAFETY THIS PAINTBALL MARKER IS NOT A TOY! This paintball marker should be treated as a dangerous instrument and should always be treated with respect. Never point a paintball marker at anyone not properly attired. This paintball marker can cause serious bodily injury including, but not limited to, blindness or even death. Please read all safety instructions and directions in this manual before using this paintball marker. Always wear approved safety goggles or an approved mask whenever you handle this paintball marker! Do not point or shoot this paintball marker at animals. Do not point or shoot this paintball marker at any person unless you and your target are engaged in paintball activities and are wearing proper safety gear including approved paintball goggles, mask, and pads. Never shoot anyone at close range! Never load this paintball marker with anything except approved paintballs. Never put anything down the barrel except paintballs, barrel squeegees or barrel plugs. Do not attempt to repair this paintball marker by yourself. Follow all maintenance instructions carefully. If you are unsure about any aspect of the maintenance procedures contact your local dealer or Airgun Designs, Inc. at (847) 520-7225. This paintball marker is always armed and cocked when an air supply is installed. Always engage the safety (located behind the trigger on the grip) and use an approved barrel plug when an air supply is attached or installed. Disengage the safety and remove the barrel plug only when on a playing field, the game has started and all players are wearing proper safety gear. When the red ring of the safety pin is showing, the safety is off and the paintball marker will fire. Always chronograph this paintball marker before using it. Never shoot this paintball marker when the chronograph readings exceed 300 fps! There is a blow-off valve incorporated into the valve mechanism that will release air pressure if pressure exceeds a predetermined amount. This blow-off valve is factory set and is not user adjustable. Remember to wear proper approved goggles or masks when chronographing your paintball marker.
Extracted from the PDF. Read the full manual above, or download it.