Icon-E-Manual-Insert.qxd
WARNING WARNING: This is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically for paintball must be worn by the user and persons within range. Recommend 18 years of age or older to purchase. Persons under 18 years of age must have adult supervision. READ OWNER’S MANUAL BEFORE USING. Rules of Safe Marker Handling
TABLE OF CONTENTS: Page
Topic(s)
2 Welcome
Warranty Information
Treat every marker as if it were loaded.
Never look down the barrel of a paintball marker.
Keep your finger off the trigger until ready to shoot.
Never point the marker at anything you don’t wish to shoot.
Keep the marker on “safe” until ready to shoot.
Keep the barrel blocking device in/on the marker’s muzzle when not shooting.
Always remove paintballs and propellant source before disassembly.
5 Parts Lists
After removing propellant source, point marker in safe direction and discharge until marker is degassed.
6 Chronographing
Store the marker unloaded and de-gassed in a secure place.
Follow warnings listed on propellant source for handling and storage.
Do not shoot at fragile objects such as windows.
9 Storage
Every person within range must wear eye, face, and ear protection designed specifically to stop paintballs and meeting ASTM standard F1776.
10 Trouble Shooting Guide
Always measure your marker’s velocity before playing paintball and never shoot at velocities in excess of 91.44 meters (300 feet) per second.
3 Initial Assembly
Battery Installation Attaching Propellant Source
4 Attaching Feeder/Hopper
Loading Paintballs
7 De-Gassing
8 Maintenance
11 Warranty Registration
Welcome . . .Thank you for purchasing the Icon Electronic Paintball marker. The Icon-E represents the culmination of a great deal of research by 32 Degrees, along with input from players such as you. We believe that the affordability of a reliable, feature-packed marker will improve your playing experience and winning percentage. While winning isn't everything, it sure beats the alternative!
Play hard, play safe, play to win!
Initial Assembly 1. Screw the barrel (#23) hand tight into the Main Body (#34). 2. Screw the Velocity Adjuster (#12) into the Hammer Plug (#24) approximately two complete turns. 3. Place a Barrel Plug or Barrel cover into/on the end of the barrel. The barrel is the top chamber of the Main Body (#34).
Battery Installation
Standard Warranty: The manufacturer warranties to the original customer that this product is free from defects in material and workmanship under normal use and service for a period of 90 days from the original date of purchase by the initial owner/purchaser. The manufacturer agrees to repair or replace (at its discretion) any product within a reasonable period of time. This warranty does not cover: o-rings, scratches, nicks, normal wear and tear of parts, any modifications or normal fading of anodizing or damage caused by dropping or hitting of the product. This warranty shall not apply if it is shown by the manufacturer that the consumer caused the defect or malfunction because of misuse. This warranty only covers original factory parts. Any modifications or tampering of original factory parts will not be covered by this warranty. Warranty work can only be conducted by the manufacture technicians and or authorized technicians. If product needs to be repair, package it carefully and send it together with your name, address, phone number and a brief description of the malfunction to: Paintball Solutions 570 Mantua Blvd Sewell, NJ 08080
1. Find the safety switch located on the left side of the marker just above the Left Grip Panel (#36). 2. Make sure the switch is in the “Safety” position (toward the rear of the marker). 3. Using a screwdriver, remove the three Grip Panel Screws (20) from the left side (side facing you if the barrel is pointing to your left) of the Grip Panel (36). 4. Install the 9-volt battery. NOTE: We recommend the use of a strong, brand name battery, such as Duracell or Energizer, for a longer lasting charge and better performance. 5. Push the safety switch towards the on position (toward the front end of the marker). 6. Confirm that the LED light located on the grip is lit, signifying that the battery is good and properly installed. 7. Push the safety switch to the off position toward the rear of the marker. 8. Replace the Grip Panel using the three Grip Panel Screws, being careful not to pinch the wires leading to the battery connector and those leading to the circuit board.
Attaching Propellant Source
Extended Warranty:
1. Confirm that the Barrel Plug is properly installed and the marker is on “Safe.” 2. Cock the marker by pulling the Bolt (#28) in the rearward direction until it “clicks” into place. This compresses the Main Spring (#2) and allows the Cupseal (#7) to properly seat. 3. Point the marker downward and in a safe direction. 4. Place a few drops of non-corrosive lubricant made specifically for use in paintball (Empire
By returning the enclosed warranty registration card or registering your warranty on-line at www.PaintballSolutions.com, within fifteen days of purchase the warranty will automatically be extended for an additional year.
Oil) into the Tank Adapter (#14). This will run the oil through the valve to ensure the ORings stay moist and do not dry or crack. Failure to do so may cause the marker to leak. 5. Place the leading end of the propellant cylinder threads into the threaded interface of the Tank Adapter (14). 6. Without pushing, twist the propellant cylinder in a clockwise direction and allow the cylinder threads to “draw” it into the Tank Adapter. DO NOT force the cylinder; it could cause cross threading, not covered by warranty. 7. Screw the propellant cylinder completely in until it is firmly seated.
The performance of your marker is directly affected by the quality of paintballs used. We highly recommend Diablo paintballs to give you satisfaction and success on the playing field. 1. Confirm that the Barrel Plug is properly installed and…
The first 989 words, extracted from the PDF. Read the full manual above, or download it.