PA I NT BAL L
M ARKER
WARNING: This is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically for paintball must be worn by the user and persons within range. Recommend 18 years of age or older to purchase. Persons under 18 years of age must have adult supervision. READ OWNER’S MANUAL BEFORE USING. Rules of Safe Marker Handling
TABLE OF CONTENTS: Page
Topic(s)
2 Welcome
Warranty Information
3 Initial Assembly
Treat every marker as if it were loaded.
Never look down the barrel of a paintball marker.
Keep your finger off the trigger until ready to shoot.
Never point the marker at anything you don’t wish to shoot.
Keep the marker on “safe” until ready to shoot.
Keep the barrel blocking device in/on the marker’s muzzle when not shooting.
Always remove paintballs and propellant source before disassembly.
After removing propellant source, point marker in safe direction and discharge until marker is degassed.
7 Maintenance
Store the marker unloaded and de-gassed in a secure place.
8 Storage
Follow warnings listed on propellant source for handling and storage.
Do not shoot at fragile objects such as windows.
Every person within range must wear eye, face and ear protection designed specifically to stop paintballs and meeting ASTM standard F1776.
Always measure your marker’s velocity before playing paintball and never shoot at velocities in excess of 91.44 meters (300 feet) per second.
Attaching Propellant Source Attaching Feeder/Hopper
4-5 Exploded Diagram
Parts Key
6 Loading Paintballs
Chronographing De-Gassing
Troubleshooting Guide
9 Warranty Registration
Welcome . . . Thank you, for purchasing this PT Jr. Paintball marker. The PT Jr. represents the culmination of a great deal of research by 32 Degrees along with input from players such as you. We believe that the affordability of a reliable, feature packed marker will improve your playing experience and winning percentage. While winning isn’t everything, it sure beats the alternative!
Play Hard, play safe, play to win! WARRANTY INFORMATION Standard Warranty: The manufacturer warranties to the original customer that this product is free from defects in material and workmanship under normal use and service for a period of 90 days from the original date of purchase by the initial owner/purchaser. The manufacturer agrees to repair or replace (at its discretion) any product within a reasonable period of time. This warranty does not cover: o-rings, scratches, nicks, normal wear and tear of parts, any modifications or normal fading of anodizing or damage caused by dropping or hitting of the product. This warranty shall not apply if it is shown by the manufacturer that the consumer caused the defect or malfunction because of misuse. This warranty only covers original factory parts. Any modifications or tampering of original factory parts will not be covered by this warranty. Warranty work can only be conducted by the manufacture technicians and or authorized technicians. If product needs to be repaired, package it carefully and send it together with your name, address, phone number and a brief description of the malfunction to: Paintball Solutions 570 Mantua Blvd Sewell, NJ 08080
Extended Warranty: By returning the enclosed warranty registration card or registering your warranty on-line at www.PaintballSolutions.com, within fifteen days of purchase the warranty will automatically be extended for an additional year.
Numbers shown in parentheses following part names correspond to the numbers on the Parts key located on the centerfold pages of this manual. Initial Assembly 1. Screw the Velocity Adjuster (#4) into the Hammer Plug (#35) approximately two complete turns. 2. Place a Barrel Plug into the end of the barrel. The barrel is the top chamber of the Main Body (#23). 3. Push the safety (#25) into the “safe” position (pushing from left to right looking down the sights).
Attaching Propellant Source 1. Confirm that the Barrel Plug is properly installed and the marker is on “Safe”. 2. Cock the marker by pulling the Bolt (#14) in the rearward direction until it “clicks” into place. This compresses the Main Spring (#2) and allows the Cupseal (#8) to properly seat. 3. Point the marker downward and in a safe direction. 4. Unscrew the 12 Gram Plug (#19) from the front of the PT JR. 5. Place a few drops of non-corrosive lubricant made specifically for use in paintball (Empire Oil) into the center of the bottom chamber of the Main Body (#23), where the CO2 will be punctured. This must be done for every 12 Gram CO2 put into the marker. This will run the oil through the valve to ensure the puncture O-Rings stay moist and do not dry or crack. Failure to do so will cause the marker to leak. 6. Remove the pin from the front of the 12 Gram Plug (#19) by just pulling back on the ball on the end until it releases. 7. Place the 12 Gram CO2 cylinder into the tube with the narrow end in first. 8. Screw back in the 12 Gram Plug (#19) clockwise into the front end of the PT JR. When almost closed by hand tightening, use the pin in the spaces provided in the 12 Gram Plug (#19) and use it to tighten the 12 Gram Plug into place. *NOTE* Once sealed, DO NOT OVERTIGHTEN.
Attaching Feed Tube 1. Confirm that the Barrel Plug is properly installed on the marker and is on “Safe”. 2. Taking the feed tube hook on the back retaining stud on the body of the PT JR (#23). Pulling back the front retaining stud clip into place. See Diagram below.
Installing the feed tube:
Removing the feed tube:
1. Hook retaining stud
1. Pull back retaining stud and un-clip from the seat
2. Pull back retaining stud and clip into place.
Extracted from the PDF. Read the full manual above, or download it.