Dye MXR Mech Frame Manual - English

W A R N I N G I M P O R TA N T S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S

This Product is not a toy. Misuse may cause serious injury or death. Paintball safety rules must be followed at all times.

Never look down the barrel or into breech area of the paintball marker.

Please read, understand and follow the directions in the owner’s manual.

Compressed gas is dangerous, do not allow compressed gas to come in contact with your skin or try to stop a leak by covering it with your hand.

Eye protection that is designed specifically for paintball and meets ASTM/CE standards must be worn by user and persons within range. Recommend 18 years or older to purchase. Person under 18 must have adult supervision. Always treat the Paintball marker as if it were loaded and able to fire. Do not exceed 850 psi input pressure. Only use .68 caliber paintballs that meet ASTM/CE standards. Ensure all air lines and fittings are tightened and secured before gassing up the paintball marker. Always chronograph the paintball marker before playing paintball.

Always fit a barrel blocking device to your paintball marker when not in use on and off the field of play. The owner’s manual and any related warnings or instructions should always accompany the product for reference or in the event of resale and new ownership. Do not point the paintball marker at anything that you do not intend to shoot. Do not shoot at people, animals, houses, cars, or anything not related to the sport of paintball. Do not fire the marker without the bolt secured in the marker. If you read these instructions and do not fully understand them or are unsure of your ability to make necessary adjustments properly, call DYE Precision or your local pro shop for help.

Never shoot the marker at velocities in excess of 300 feet per second, or at velocities greater than local or national laws allow. 01

MXR Mechanical & Single Trigger Electronic Frame Kit The MXR mechanical frame kit offers industry-leading flexibility and may be used in either mechanical configuration or single trigger electronic configuration.

Get personalized help at the DYE Tech Central Facebook Group 03

Installation STEP1: REMOVE FRAME AND BATTERIES When servicing your marker: • Make sure your hopper is removed from the MXR. • Make sure there are no paintballs in the breach of the MXR. • Always remove the air supply and relieve all gas pressure in the MXR before disassembly. • Remove front grip and batteries. • Remove bolt kit. • Remove front and rear frame mounting screws with a 3/32” allen wrench.

The MXR utilizes a positive force conector to link the body and frame electrical components together. There are no wires to disconnect when removing the frame from the body.