TECHNICAL MANUAL
*Pictured with optional user installed bolt reset handle and 13CI HPA Air Tank. Includes: Marker Polymer Flip Up Sights 1 18 Round Paintball/FSR Magazine 1 Tool Kit and Barrel Plug
Do not load or fire this marker until you have completely read this manual and are familiar with its safety features, mechanical operation, and handling characteristics. Handle this and any marker as if it were loaded at all times. Keep your finger off of the trigger until ready to shoot. Do not look down the barrel of a paintball marker. Accidental discharge into the eyes may cause permanent injury or death. Keep the marker on safe until ready to shoot. Keep the barrel plug installed on marker when not shooting. Never point the marker at anything you do not intend to shoot. Never fire your marker at anything you do not intend to shoot because there may be balls or foreign debris lodged in the chamber, barrel, and / or marker valve. Do not shoot at fragile objects such as windows. Never fire your marker at personal property of others; the paintball can stain the paint of automobiles and houses. Always keep the muzzle pointed in a safe direction, even if you stumble or fall. Eye, face, and ear protection designed specifically to stop paintballs in the form of approved goggles, and full face mask should be worn by the user and any person within range. Never shoot at a person who is not protected by eye, face, and ear protection designed for paintball. Pressurize and load the marker only when the marker will be immediately used. Before storing or disassembling be sure to point your marker in a safe direction, fire several times to be sure there are no balls lodged in the chamber and / or barrel or air left in the marker. Install barrel plug. Store the marker unloaded and degassed in a secured place. Familiarize yourself with any warnings and instructions listed on the air supply cylinder. Contact the air supply cylinder manufacturer with any questions. Do not field strip or otherwise disassemble this marker while it is pressurized with air. Dress appropriately when playing the game of paintball. Avoid exposing any skin when playing the game of paintball. Even a light layer will absorb some of the impact and protect you from the paintballs. Keep exposed skin away from escaping gas when installing or removing air supply cylinder or if the marker or air supply is leaking. Compressed air, CO2, and nitrogen gasses are very cold and can cause frostbite under certain conditions. Use only .68 caliber paintballs, never load or fire any foreign objects. Avoid alcoholic beverages before and during the use of this marker. Handling markers while under the influence of drugs or alcohol is a criminal disregard for public safety. Avoid shooting an opponent at point blank, 2 meters or less. Familiarize yourself with instructions listed on air supply cylinder or adaptor. Contact the air supply cylinder or adaptor manufacturer with any questions. Always measure your marker’s velocity before playing paintball, and never shoot at velocities in excess of 300 feet per second.
WARRANTY Valken warrants that this product is found free from defects in materials and workmanship for a period of 1 year from the original date of purchase by the original owner. Unauthorized modifications, alterations, neglect or abuse of this product may result in repairs that are not covered by this warranty. This warranty covers the parts and labor required to repair the product to proper working order. Valken is dedicated to providing you with the best product and excellent support for your ultimate paintball experience. Additional charges such as shipping, or parts required as a result of misuse may not be covered under this warranty policy. See www.valken.com for full warranty details.
EXCEPT WHEN MARKER IS IN USE, ALWAYS MAKE SURE THAT THE BARREL PLUG IS INSTALLED AND THE SELECTOR SWITCH IS IN SAFE MODE, WHICH DISABLES THE TRIGGER.
SAFETY
To turn ON the Safety (SAFE MODE): To turn OFF the Safety (FIRE MODE):
Rotate Selector Switch counterclockwise until the aarow points to “0” Rotate Selector Switch clockwise until the aarow points to “1” for semi-auto; to “∞” for full auto.
BARREL PLUG
Insert plug into barrel and loop under the Magazine Well as shown. Pinch cord length adjuster button and hold to back of Magazine Well as you pull cord through it until adjuster is snug against the back of the magazine well, then release. Check to be sure there is enough cord elasticity to pull cord / adjuster off to remove barrel plug for firing. After the cord length is adjusted, lock cord length by tying a knot in the cord against the back of the adjuster.
Extracted from the PDF. Read the full manual above, or download it.