Planet eclipse: etha3 User manual: english
SUB TITLE
SUB TITLE SAFETY NOTICES IMPORTANT
PLANET ECLIPSE PAINTBALL EQUIPMENT IS NOT A TOY. PAINTBALL SAFETY RULES MUST BE FOLLOWED AT ALL TIMES.
Always fit a barrel-blocking device to the marker when not in use.
Always remove paintballs from the marker when not in use.
Careless or improper use of the marker and/or parts, including failure to follow instructions and warnings within this User Manual could cause serious injury or even death.
Do not remove or deface any warnings attached to the marker.
Paintball industry standard eye/face/ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by the user and any person within range. Proper protection must be worn during assembly, cleaning and maintenance.
Hearing protection should be worn.
Never shoot at a person who is not wearing proper protection.
Never look directly into the barrel of the marker. Accidental discharge into the eyes may cause permanent injury or even death. Never look into the barrel or breech area of the marker whilst the marker is switched on and able to fire.
Keep the marker switched off until ready to shoot.
Treat every marker as if it is loaded and ready to fire.
IMPORTANT SAFETY NOTICES
The electronic On/Off button or mechanical Safety switch is the marker’s disabling device. Always switch the marker off when not in use. Etha3
Do not field strip or remove any parts while the marker is pressurised.
Do not pressurise the marker without all the components of the marker correctly installed, as high-pressure gas may be emitted.
Do not fire the marker without the bolt correctly installed.
Never put your finger or any foreign objects into the paintball feed tube of the marker. Never allow pressurised gas to come into contact with any part of your body.
Only use professional paintball fields where codes of safety are strictly enforced. Use compressed air/nitrogen only. Do not use any other compressed gas or pressurised liquid including CO2. Always follow instructions, warnings and guidelines given with any first stage regulator you use with the marker. Use 0.68 inch calibre paintballs only. Always measure your marker’s velocity before playing paintball, using a suitable chronograph. Never shoot at velocities in excess of 300 feet (91.44 metres) per second, or at velocities greater than local or national laws allow. Any installations, modifications or repairs should be carried out by a qualified individual at a licensed and insured paintball facility.
This User Manual is in English. It contains important safety guidelines and instructions. Should you be unsure at any stage, or unable to understand the contents of this manual you must seek expert advice. Le mode d’emploi est en Anglais. Il contient des instructions et mesures de sécurité importantes. En cas de doute, ou s’il vous est impossible de comprendre le contenu du monde d’emploi, demandez conseil à un expert. Este manual de usuarios (operarios)
Always remove the first stage regulator and relieve all residual gas pressure from the marker for transport and storage.
Usarios está en Inglés.Contiene importantes normas de seguridad e instrucciones. Si no está seguro de algùn punto o no entiende los contenidos de este manual debe consultar con un experto.
Always follow guidelines given with your first stage regulator for safe transportation and storage.
Diese Bedienungs - und Benutzeranleitung ist in Englisch.
Always store the marker in a secure place.
Observe all local and national laws, regulations and guidelines.
Persons under 18 years of age must have adult supervision when using or handling the marker.
Always remove the first stage regulator and relieve all residual gas pressure from the marker before disassembly.
Warning ! This user manual must accompany the product in the event of resale or new ownership. Should you be unsure at any stage you must seek expert advice.
Sie enthaelt wichtige Sicherheitsrichtlinen und - bestimmungen. Solten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalte dies Heftes nicht verstehen, lassen Sie sich bitte von einen Experten beraten. etha3
04 contents WELCOME SUB TITLE TO THE N3XTL3V3L
WELCOME TO PLANET ECLIPSE
Parts List
Setting Up
Inline Regulator
Switching The ETHA3 On/Off
Solenoid Assembly
LED Status Indicator
Gamma Core Bolt Assembly (68cal)
Velocity Adjustment
Frame Assembly
Trigger Adjustment
Clamping Feed Neck Assembly
Unloading The Marker
Two-Piece Grips
Storage And Transportation
Push On Purge System (POPS) Assembly
We Got Your Back
Tournament Lock Button
The Set-Up Mode
ETHA3 Circuit Board
Presets
Glossary Of Terms
Fault Finding Tables
SUPPORT
QUALITY
As an Eclipse customer you will have access to our worldwide technical support network that will help you with any technical problems from localised service centres to on-site* tech support.
All Eclipse products undergo meticulous checks by experienced specialists who care about the product that arrives at your door. Precision materials + high standards = a quality product.
WARRANTY *
STANDARD
All Eclipse Markers have 24 months limited warranty from the date of manufacture, or a minimum of 12 months with proof of purchase. Meaning we got your back from day one.
Your Eclipse marker is awesome and requires no after market parts however, for genuine Eclipse accessories and support please consult your local Eclipse Dealer for upgrade options.
* Conditions apply, see online policies for full details at planeteclipse.com/warranty Etha3
Extracted from the PDF. Read the full manual above, or download it.