PLANET ECLIPSE: EMF100 USER MANUAL / ENGLISH
SHAPED ROUND COMPATIBLE
02 WARNINGS
READ CAREFULLY BEFORE USE
THE PLANET ECLIPSE EMF100 IS NOT A TOY. PAINTBALL SAFETY RULES MUST BE FOLLOWED AT ALL TIMES.
areless or improper use of the EMF100, including failure to follow C instructions and warnings within this User Manual could cause serious injury or death.
Do not remove or deface any warnings attached to the EMF100.
aintball industry standard eye/face/ear and head protection P designed specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by the user and any person within range. Proper protection must be worn during assembly, cleaning and maintenance.
Hearing protection should be worn.
Never shoot at a person who is not wearing proper protection.
ever look directly into the barrel of the marker. Accidental N discharge into the eyes may cause permanent injury or death. Never look into the barrel or breech area of the EMF100 whilst the marker is switched on and able to fire.
Keep the EMF100 in SAFE mode until ready to shoot.
Treat every marker as if it is loaded and ready to fire.
Always fit a barrel-blocking device to the EMF100 when not in use.
03 03 WARNINGS
Always remove paintballs from the EMF100 when not in use.
Do not field strip or remove any parts while the marker is pressurised.
Persons under 18 years of age must have adult supervision when using or handling the EMF100.
o not pressurise the EMF100 without all the components of the D marker correctly installed, as high-pressure gas may be emitted.
Use only professional paintball fields where codes of safety are strictly enforced.
Do not fire the EMF100 without the bolt correctly installed.
Use compressed air/nitrogen only. Do not use any other compressed gas or pressurised liquid including CO2.
Never put your finger or any foreign objects into the paintball feed tube or magazine well of the EMF100.
lways follow instructions, warnings and guidelines given with any A first stage regulator you use with the EMF100.
Never allow pressurised gas to come into contact with any part of your body.
Use the calibre of paintballs or shaped rounds that are correct for your marker calibre (0.68ca).
Always measure your marker’s velocity before playing paintball, using a suitable chronograph.
Never shoot at velocities in excess of 300 feet (91.44 metres) per second, or at velocities greater than local or national laws allow.
Any installations, modifications or repairs should be carried out by a qualified individual at a licensed and insured paintball facility.
Always remove the first stage regulator and relieve all residual gas pressure from the EMF100 before disassembly.
Always remove the first stage regulator and relieve all residual gas pressure from the EMF100 for transport and storage.
Always follow guidelines given with your first stage regulator for safe transportation and storage.
Always store the EMF100 in a secure place.
Observe all local and national laws, regulations and guidelines.
WARNING!
This user manual must accompany the product in the event of resale or new ownership. Should you be unsure at any stage you must seek expert advice.
This Users Manual is in English. It contains important safety guidelines and instructions. Should you be unsure at any stage, or unable to understand the contents of this manual you must seek expert advice. Le mode d’emploi est en Anglais. Il contient des instructions et mesures de sécurité importantes. En cas de doute, ou s’il vous est impossible de comprendre le contenu du monde d’emploi, demandez conseil à un expert. Este manual de usuarios (operarios) Usarios está en Inglés.Contiene importantes normas de seguridad e instrucciones. Si no está seguro de algùn punto o no entiende los contenidos de este manual debe consultar con un experto. Diese Bedienungs - und Benutzeranleitung ist in Englisch. Sie enthålt wichtige Sicherheitsrichtlinen und bestimmungen. Solten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalte dies Heftes nicht verstehen, lassen Sie sich bitte von einen Experten beraten.
WARNING
04 CONTENTS
QUICK START (06 - 30)
MAINTENANCE (31 - 33)
Setting up the EMF100 - MagFed Setting up the EMF100 - Hopper Fed The EMF100 safety button Changing between MagFed and Hopper Fed Inserting the magazine Removing the magazine Loading / Reloading Changing magazine springs Attaching a PAL loader system Attaching a generic loader Attaching a front shroud Accessory mounting Attaching a stock Velocity adjustment Detents Unloading the EMF100 - MagFed Unloading the EMF100 - Hopper Fed Storage and transportation
Parts list EMF100 inline regulator Three-way assembly Bolt assembly (68cal) Push On Purge System Frame assembly Feedneck and PAL plunger Two-piece grips Magazine
T O G E W UR YO CK!!! BA
On-line maintenance videos Fault-finding tables
Our promise Index Notes Warranty Registration Card Notes
FOLLOW OUR OFFICIAL PLANET ECLIPSE SOCIAL MEDIA CHANNELS TO KEEP UP TO DATE WITH OUR TECH SUPPORT EVENTS CALENDAR.
O SE PR P I L L C TS AL NET E N A E L V P E F LL AT RMY O NTBA RE TH U S E OUR A TTEND PAI AK R ARE TO M SA E D K L R R A TECH S, O PSE M T ALL TIME HE W I T L R C E E OV UR S, A ND YO CYLINDER A U YO LL S. ON A G NARIO N I E C S FIR E L GAM IN AL
Extracted from the PDF. Read the full manual above, or download it.