BT (Battle Tested) TM-15 Manual - English

13. General Maintenance

14. Assembly/Disassembly Instructions

15. Storage and Transportation

16. Troubleshooting Guide

17. Diagrams and Parts List

WARRANTY

(Inside Back Cover)

NEITHER BT PAINTBALL DESIGNS, INC. NOR ANY OF ITS PRODUCTS ARE AFFILIATED WITH TIPPMANN SPORTS, LLC. B T P A I N T B A L L . C O M

For manuals and warranty details, go to: paintballsolutions.com For manuals in other languages, (where applicable), go to:paintballsolutions.com ©2009 BT Paintball Designs, Inc. The BT Shield, “Battle Tested” and “TM-15” are trademarks of BT Paintball Designs, Inc. All rights reserved.

1. Rules for Safe Marker Handling IMPORTANT: Never carry your TM-15 uncased when not on a playing field. The non-playing public and law enforcement personnel may not be able to distinguish between a paintball marker and firearm. For your own safety and to protect the image of the sport, always carry your TM-15 in a suitable marker case or in the box it came in. • Treat every marker as if it were loaded. • Never look down the barrel of a paintball marker. • Keep your finger OFF the trigger until ready to shoot. • Never point the marker at anything you don’t wish to shoot. • Keep the marker on “safe” until ready to shoot. • Keep the barrel blocking device in/on the marker’s barrel when not shooting. • Always remove paintballs and air source before disassembly. • After removing air source, point marker in safe direction and discharge until marker is degassed. • Store the marker unloaded and degassed in a secure place. • Follow warnings listed on the air source for handling and storage. • Do not shoot at fragile objects such as windows. • Every person within range must wear eye, face, and ear protection designed specifically to stop paintballs and meeting ASTM standard F1776. • Always measure your marker’s velocity before playing paintball and never shoot at velocities in excess of 91.44 meters (300 feet-per-second).

READ OWNERS MANUAL BEFORE USING. 2. Introduction and Specifications Congratulations on your selection of the TM-15 paintball marker. The TM15 is made to provide you with many years of reliable performance. We are honored that you have chosen the TM-15 as your marker of choice and hope you enjoy using this high quality product. The patented Valve design, Slip Stream™ Solenoid, Hall Effect Sensor Trigger, and Four Position Selector Switch set new standards for marker tech-

nology. The TM-15 is precision engineered from magnesium alloy, aircraftgrade aluminum, and composite materials. We expect you to play hard and play frequently and the TM-15 was built with this in mind. The TM-15 operates on low pressure. The main operating pressure is 180–200 PSI. The pressure can be nominally adjusted and monitored visually via the gauge on the bottomline regulator. There is no secondary regulator to worry about. TM-15 Specifications Model- TM-15 Barrel- 14" Ported Barrel Caliber- .68 Action- Semi Auto, PSP Burst, and NXL Full Auto Air source- Compressed Air Battery- One 9-Volt (Alkaline Only) Cycle Rate- Up to 20 BPS Shell Material- Magnesium Alloy Accuracy Range- 150ft + Included with your TM-15 - 14" Barrel (.691 bore) - Allen Wrenches - Spare Parts Kit - Barrel Blocking Device - One 9-Volt Battery - Manual - One BT Rip-Clip™ Adapter & Adapter Screw Kit, for use with the TM RipClip™ only. (TM Rip-Clip™ not included)

3. Battery Replacement and Life Indicator The TM-15 requires a single 9-volt alkaline battery as the electronic power source. The use of long life batteries is recommended. The battery is installed by removing the magazine and inserting a 9-Volt battery into the magazine.