OpEraTiON maNual READ THIS MANUAL CAREFULLY BEFORE USING YOUR ETEK EGO.
WARNING: ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES. Warnings for safe Etek Ego handling: • The Etek Ego is not a toy. • Careless or improper use, including failure to follow instructions and warnings within this User Manual and attached to the Etek Ego could cause death or serious injury. • Do not remove or deface any warnings attached to the Etek Ego. • Paintball industry standard eye/face/ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by user and any person within range. • Persons under 18 years of age must have adult supervision when using or handling the Etek Ego. • Observe all local and national laws, regulations and guidelines. • Use only professional paintball fields where codes of safety are strictly enforced. • Use compressed air/nitrogen only. Do not use Co2 • Always follow instructions, warnings and guidelines given with any first stage regulator you use with the Etek Ego. • Use 0.68 calibre paintballs only. • Keep the Etek Ego switched off until ready to shoot. • Treat every marker as if it is loaded.
• Do not fire the Etek Ego without the bolt in the breech, as highpressure gas will be emitted. • Do not fire the Etek Ego without the bolt pin locked securely in place. • Never look into the barrel or breech area of the Etek Ego whilst the marker is switched on and able to fire. • Never put your finger or any foreign objects into the paintball feed tube of the Etek Ego. • Never allow pressurised gas to come into contact with any part of your body. • Always switch off the Etek Ego when not in use. • Always fit a barrel-blocking device to the Etek Ego when not in use on the field of play. • Always remove all paintballs from the Etek Ego when not in use on the field of play. • Always remove the first stage regulator and relieve all residual gas pressure from the Etek Ego before disassembly. • The Etek Ego can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed. Always discharge the marker in a safe direction to relieve this residual gas pressure. • Always remove the first stage regulator and relieve all residual gas pressure from the Etek Ego for transport and storage.
• Never point the Etek Ego at anything you do not intend to shoot.
• Always follow guidelines given with your first stage regulator for safe transportation and storage.
• Do not shoot at persons at close range.
• Always store the Etek Ego in a secure place.
• Always measure your markers velocity before playing paintball, using a suitable chronograph. • Never shoot at velocities in excess of 300 feet (91.44 meters) per second, or at velocities greater than local or national laws allow.
NOTE: This user manual must accompany the product in the event of resale or new ownership. should you be unsure at any stage you must seek expert advice (See service centers)
ORIENTATION This section names the component parts of the Etek Ego Marker. This section is essential reading for everyone.
> GET TO KNOW YOUR etek EGO > THE etek EGO control CONSOLE
QUICK SET-UP This section provides details on how to get up and running quickly with your Etek Ego. This section is essential reading for everyone.
> Installing a battery > Switching On the Etek Ego. > Switching Off the Etek Ego. > Firing the Etek Ego. > Using the Etek Break-Beam Sensor System
USING YOUR EGO This section provides more detailed information on how to use and interact with the Etek Ego via its user interface.
> Setting up > Installing a Preset Air System > Installing an Adjustable Air System > Attaching a loader > Switching on > THE CONTROL CONSOLE > UNDERSTANDING THE BBSS OPERATION > Adjusting Velocity > Adjusting the LPR Pressure
WARNING
ADVANCED SET-UP This section contains in-depth information on setting up the Etek Ego. > Setting the trigger > the tournament lock > The Set-Up Menu > the Modifying Parameter > the Mode Parameter > Maximum Rate Of Fire (capped modes) > Maximum Rate Of Fire (BBSS disabled) > Dwell > debounce > the Ball Detection Time > THE RESET PARAMETER
MAINTENANCE This section acts as a guide to performing routine maintenance. > Cleaning the Break-Beam Sensor System > Stripping and cleaning the Inline Regulator > Stripping and cleaning the LPR > Cleaning and lubricating the rammer > How to strip the Etek EgO > Assembling the Etek Ego > Cleaning the Bolt > Stripping and cleaning the Solenoid
CONTENTS VIsIT www.PlAneTeclIPse.coM VIsIT www.PlAneTeclIPse.coM
FAULT FINDING This section provides information on how to resolve any problems that might arise with your Etek Ego.
SERVICE CENTRES This section provides information on the location of your nearest Etek Ego Service Centre.
PARTS LIST This section provides a table of components that make up the Eclipse Ego. WARRANTY CARD Tear-out product registration card to be completed and returned to Planet Etek. Alternatively register online at www.planeteclipse.com
ACCESSORIES Available upgrade / repair kits for your Etek Ego.
• This Users Manual is in English. • It contains important safety guidelines and Instructions. • Should you be unsure at any stage, or unable to understand the contents within this manual you must seek expert advice. • Le mode d'emploi est en Anglais. • Ilcontient des instructions et mesures de sécurité importantes. • En cas de doute, ou s'il vous est impossible de comprendre le contenu du monde d'emploi, demandez conseil à un expert. • Este manual de (operarios y) usarios està en Inglés. • Contiene importantes normas de seguridad e instrucciones. • Si no esta seguro de algùn punto o no entiende los conteindos de este manual debe conultar con un experto. • Diese Bedienungs - und Benutzeranleitung ist in Englisch. • Sie enthålt wichtige Sicherheitsrichtlinen und - bestimmungen. • Solten Sie sich in irgendeiner Weise un sicher sein. Oder den inhalte dies heftes nicht versthen…
The first 1033 words, extracted from the PDF. Read the full manual above, or download it.