Proto Paintball USA 10637 Scripps Summit Ct. San Diego, CA 92131 ®
P 858-536-5183 F 858-536-5191 EUROPE Dye House, 7-8 Commerce Way Croydon, Surrey, CR0 4XA, United Kingdom P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339 ASIA No. 253, Guojhong Rd., Dali City Taichung County 412, Taiwan (R.O.C.) P +886 (0) 4-2407-9135 F +886 (0) 4-2407-2090 www.protopaintball.com www.dyematrix.com Copyright ©2010 DYE Precision, Inc. The stylized “proto” logo and the “P” logo are either registered trademarks, trademarks, or design trademarks of DYE Precision, Inc. DYE Precision, Inc. U.S. Patent # 5,613,483. OTHER U.S. AND INT’L PATENTS PENDING. Covered by one or more of the following U.S. Patents, 5,613,483; 5,881,707; 5,967,133; 6,035,843 and 6,474,326.
S L G™ O W N E R ’ s M A N U A L www .
protopaint
TA B L E O F C O N T E N T S
- Important safety instructions and guidelines page 02
- Quick start up guide page 04
- SLG™ BOARD SETTINGS AND FUNCTIONS page 06
- Trigger adjustments page 1 1
Included with your PROTO SLG™
- SLG™ Marker - Allen tool set including 0.05”, 1⁄16”, 5⁄64”, 3⁄32”, 1⁄8”, 5⁄32”, 3⁄16” and 1⁄4”. - 1⁄4 oz. Slick Lube™ - Parts Kit - Barrel Sock - Owner’s Manual - Warranty Card - 9V Battery
- SLG™ BOLT ASSEMBLY AND MAINTENANCE page 1 2
- SLG™ BOLT O-RING LIST page 1 5
- FEED NECK ADJUSTMENT page 16
- Airport adjustment page 1 8
- Velocity adjustment page 20
- hyper3™ Regulator ADJUSTMENT AND MAINTENANCE page 2 1
- ANTI CHOP EYES and BALL DETENTS page 22
- Trouble Shooting page 24
The SLG™ comes with the tools required to perform general maintenance and setting up. For a complete service, the following tools are required: - #0 Phillips head screw driver - A sharp pick to remove O-rings
- EXPLODED VIEW page 28
- Warranty and legal information page 29
www . protopaint
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES
• The SLG™ marker is not a toy. Misuse may cause serious injury or death. • Please read, understand and follow the directions in the SLG™ owner’s manual. • Eye protection that is designed specifically for paintball and meets ASTM/CE standards must be worn by user and persons within range. • Recommend 18 years or older to purchase. Person under 18 must have adult supervision. • Do not put your finger inside the breech of the SLG™. Moving bolt can cause a serious injury. • Always treat the SLG™ marker as if it were loaded and able to fire. • Only use compressed air, nitrogen gas or CO2 in the SLG™ marker. • Do not exceed 850 psi input pressure. • Only use .68 caliber paintballs that meet ASTM/CE standards. • Ensure all air lines and fittings are tightened and secured before gassing up the SLG™. • Never shoot the SLG™ marker at velocities in excess of 300 feet per second, or at velocities greater than local or national laws allow.
• Always chronograph the SLG™ marker before playing paintball. • Never look into the barrel or breech area of the SLG™ when the marker is switched on and able to fire. • Compressed gas is dangerous, do not allow compressed gas to come in contact with your skin or try to stop a leak by covering it with your hand. • Always fit a barrel blocking device to your SLG™ when not in use on the field of play. • The owner’s manual and any related warnings or instructions should always accompany the product for reference or in the event of resale and new ownership. • Do not point the SLG™ marker at anything that you do not intend to shoot. • Do not shoot at people, animals, houses, cars or anything not related to the sport of paintball. • Do not fire the SLG™ without the bolt screwed in completely. • If you read these instructions and do not fully understand them or are unsure of your ability to make necessary adjustments properly, call DYE Precision or your local pro shop for help. www . protopaint
Extracted from the PDF. Read the full manual above, or download it.