Dye Rail '10 Manual - English

DYE Precision, Inc. U.S. Patent # 5,613,483. OTHER U.S. AND INT’L PATENTS PENDING. Covered by one or more of the following U.S. Patents, 5,613,483; 5,881,707; 5,967,133; 6,035,843 and 6,474,326.

O W N E R ’ S W .

M A N U A L A

T A B L E O F CO N T E N T S

- IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES PAGE 02

- QUICK START UP GUIDE PAGE 04

- RAIL™ BOARD SETTINGS AND FUNCTIONS PAGE 06

INCLUDED WITH YOUR PROTO MATRIX RAIL™

MATRIX Marker Allen tool set including 0.05”, 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16” and 1/4”. 1/2 oz. DYE Slick Lube™ Parts Kit Barrel Sock Owner’s Manual Warranty Card 9V Battery

- TRIGGER ADJUSTMENTS PAGE 14

- RAIL™ BOLT ASSEMBLY AND MAINTENANCE PAGE 16

- RAIL™ BOLT O-RING LIST PAGE 19

- FEED NECK ADJUSTMENT PAGE 20

- AIRPORT ADJUSTMENTS

- HYPER3™ REGULATOR ADJUSTMENT AND MAINTENANCE PAGE 24

- VELOCITY ADJUSTMENT PAGE 24

- ANTI CHOP EYES AND BALL DETENTS PAGE 26

The RAIL™ comes with the tools required to perform general maintenance and setting up.

- TROUBLE SHOOTING PAGE 28

- EXPLODED VIEW PAGE 32

For a complete service the following tools are required 3/8” allen key 5/16” allen key #0 Phillips head screw driver A sharp pick to remove O-rings

- WARRANTY AND LEGAL INFORMATION PAGE 33

B A L L . C O

IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES

• The RAIL™ marker is not a toy. Misuse may cause serious injury or death. • Please read, understand and follow the directions in the RAIL™ owner’s manual.

• Never look into the barrel or breech area of the RAIL™ when the marker is switched on and able to fire.

• Eye protection that is designed specifically for paintball and meets ASTM/CE standards must be worn by user and persons within range.

• Compressed gas is dangerous, do not allow compressed gas to come in contact with your skin or try to stop a leak by covering it with your hand.

• Recommend 18 years or older to purchase. Person under 18 must have adult supervision.

• Always fit a barrel blocking device to your RAIL™ when not in use on the field of play.

• Always treat the RAIL™ marker as if it were loaded and able to fire.

• The owner’s manual and any related warnings or instructions should always accompany the product for reference or in the event of resale and new ownership.

• Only use compressed air or nitrogen gas in the RAIL™ marker. DO NOT USE CO2. • Do not exceed 850 psi input pressure. • Only use .68 caliber paintballs that meet ASTM/CE standards. • Ensure all air lines and fittings are tightened and secured before gassing up the RAIL™. • Always chronograph the RAIL™ marker before playing paintball. • Never shoot the RAIL™ marker at velocities in excess of 300 feet per second, or at velocities greater than local or national laws allow.

• Do not point the RAIL™ marker at anything that you do not intend to shoot. • Do not shoot at people, animals, houses, cars or anything not related to the sport of paintball. • Do not fire the RAIL™ without the bolt screwed in completely. • If you read these instructions and do not fully understand them or are unsure of your ability to make necessary adjustments properly, call DYE Precision or your local pro shop for help.