dYe Precision, Inc. USA 10637 Scripps Summit Ct. San Diego, CA 92131 P 858-536-5183 f 858-536-5191 GERMANY Albert Einstein Str. 2 B 77656 Offenburg, Germany P +49 (0)781 639 349 91 ASIA No. 253, Guojhong Rd., Dali Dist. Taichung City 412, Taiwan (R.O.C.) P +886 (0) 4-2407-9135 f +886 (0) 4-2407-2090 dyepaintball.com Copyright ©2016 DYE Precision, Inc. The stylized “proto” logo, the “P” logo, and MaXXed RIZE logo are either registered trademarks, trademarks, or design trademarks of DYE Precision, Inc. DYE Precision, Inc. U.S. Patent # 5,613,483, 7,594,503; 7,765,998. OTHER U.S. AND INT’L PATENTS PENDING. Covered by one or more of the following U.S. Patents, 5,613,483; 5,881,707; 5,967,133; 6,035,843 and 6,474,326. For a complete list of patents visit www.dyeprecision.com/patents Made in Taiwan
MAxxED
R I Z E™ O W N E R ’ S D
MANUAL
TAbLE OF CONTENTS
- IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES PAGE 02
- QUICk START UP GUIDE PAGE 04
INCLUDED WITh YOUR MAxxED RIZE™
MAXXED RIZE™ Marker 14“ 2pc Proto Barrel Allen tool set including 0.05”, 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16” and 1/4”. 1/4 oz. DYE Slick Lube™ Parts Kit Barrel Cover Owner’s Manual Warranty Card 9V Battery The MAXXED RIZE™ comes with the tools required to perform general maintenance and setting up. For a complete service the following tools are required: C-clip pliers #0 Phillips head screw driver A sharp pick to remove O-rings
- RIZE™ bOARD SETTINGS AND FUNCTIONS PAGE 06
- TRIGGER ADjUSTMENTS PAGE 13
- RIZE™ bOLT ASSEMbLY AND MAINTENANCE PAGE 14
- RIZE™ bOLT O-RING LIST PAGE 17
- FEED NECk ADjUSTMENT PAGE 18
- hYPER3™ REGULATOR ADjUSTMENT AND MAINTENANCE PAGE 20
- vELOCITY ADjUSTMENT PAGE 20
- ANTI ChOP EYES AND bALL DETENTS PAGE 22
- ON/OFF AIRPORT ADjUSTMENTS PAGE 24
- TROUbLE ShOOTING PAGE 25
- ExPLODED vIEW PAGE 28
- WARRANTY AND LEGAL INFORMATION PAGE 29
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES
• The RIZE™ marker is not a toy. Misuse may cause serious injury or death. • Please read, understand and follow the directions in the RIZE owner’s manual.
• Eye protection that is designed specifically for paintball and meets ASTM/CE standards must be worn by user and persons within range. • Recommend 18 years or older to purchase. Person under 18 must have adult supervision. • Always treat the RIZE™ marker as if it were loaded and able to fire. • Do not exceed 850 psi input pressure. • Only use .68 caliber paintballs that meet ASTM/CE standards. • Ensure all air lines and fittings are tightened and secured before gassing up the RIZE™. • Always chronograph the RIZE™ marker before playing paintball. • Never shoot the RIZE™ marker at velocities in excess of 300 feet per second, or at velocities greater than local or national laws allow.
• Compressed gas is dangerous, do not allow compressed gas to come in contact with your skin or try to stop a leak by covering it with your hand. • Always fit a barrel blocking device to your RIZE™ when not in use on the field of play. • The owner’s manual and any related warnings or instructions should always accompany the product for reference or in the event of resale and new ownership. • Do not point the RIZE™ marker at anything that you do not intend to shoot. • Do not shoot at people, animals, houses, cars or anything not related to the sport of paintball. • Do not fire the RIZE™ without the bolt screwed in completely. • If you read these instructions and do not fully understand them or are unsure of your ability to make necessary adjustments properly, call DYE Precision or your local pro shop for help.
• Never look into the barrel or breech area of the RIZE™ when the marker is switched on and able to fire.
Extracted from the PDF. Read the full manual above, or download it.