DLX PREMIUM M ARK ER
LUXE D E TA I L E D O PE R AT O R’ s M A N UA L
1.1 Quick Start • • • 4 •
1.2 INSTALLING THE BARREL BLOCKER • • • 7 •
1.3 SELECTING AND INSTALLING A LOADER • • • 7 • 1.4 HANDLING THE LiPo BATTERY • • • 7 •
2.1 ABOUT compressed air • • • 10 •
2.2 INSTALLING AN AIR SYSTEM • • • 10 • 2.3 FEATHERTOUCH™ • • • 11 •
2.4 REGULATOR GRIP PANEL • • • 11 •
3.1 Luxe® BARREL SYSTEM • • • 13 • 3.2 ADJUSTING VELOCITY • • • 14 •
3.3 DEGASSING THE SYSTEM • • • 14 •
3.4 ADJUSTING THE TRIGGER • • • 15 •
3.5 LiPo RECHARGEABLE BATTERY • • • 16 •
3.6 REPLACING OR CHARGING THE BATTERY • • • 17 •
4.1 INTRODUCTION TO PROGRAMMING • • • 18 • 4.2 NAVIGATION MODES • • • 19 •
ORIENTATION Welcome to the Luxe® experience. Please read this section thoroughly before you use your Luxe®, to learn about important safety and operation procedures.
4.4 RESET TO FACTORY DEFAULTS • • • 19 • 4.5 USB INTERFACE • • • 19 •
4.6 FIRING MODES and settings • • • 20 •
4.7 MENU settings • • • 22 •
5.1 Luxe® POWER CORE • • • 24 •
5.2 BALL DETENTS & Vision™ EYES • • • 26 •
AIR Your Luxe® relies on the power of high-pressure compressed air for fast, quiet and consistent operation. Proper air system handling is extremely important for your safety.
6.1 INTRODUCTION • • • 28 •
HARDWARE The physical aspects of operating and adjusting your new Luxe® have been streamlined to get you in the game fast. This section will inform you about trigger and velocity adjustment as well as barrel tuning and battery maintenance.
THIS IS NOT A TOY. LUXE® ELECTROPNEUMATIC .68 CALIBER PAINTBALL MARKER. Misuse/careless use may cause serious injury or death. Eye protection in compliance with ASTM Specification F1776, with temple, ear and face protection must be worn by anyone within range of the Luxe®. Must be at least
4.3 ADDITIONAL POWER BUTTON FUNCTIONS • • • 19 •
6.2 SERVICING THE VERTICAL REGULATOR • • • 30 • 6.3 BALL DETENT ASSEMBLIES • • • 32 • 6.4 GRIP FRAME REMOVAL • • • 33 •
6.5 VISION AND SOLENOID VALVE REMOVAL • • • 34 • 6.6 THE LUXE® ICE ADVANTAGE • • • 36 •
6.7 QUICK-STRIP PLUG DISASSEMBLY • • • 38 • 6.8 TROUBLESHOOTING • • • 40 •
6.9 LIMITED WARRANTY • • • 41 •
SOFTWARE Your Luxe® has a computer on board to provide precise control of its operation. Fortunately you won't need to be a computer expert to use it. Voice menus and a joystick interface put complete control at your fingertips.
MAINTENANCE Regular maintenance is necessary to keep your Luxe® in peak operating condition. Tool-free access to the Luxe® Power Core and ball detents make this a quick and simple process.
ADVANCED
MAINTENANCE Should anything go wrong with your marker, your Certified Luxe® Dealer is ready and able to provide complete warranty support without the hassle or wait of shipping your marker. For the more more technically inclined, advanced maintenance guides cover more complex service procedures.
18 years old to purchase, 14 years old to use or operate with adult supervision, 10 years or older to operate on insured paintball fields meeting ASTM-standard F1777-97. Thoroughly read entire operating manual before using. DLX TECHNOLOGY GROUP, 100 STATION STREET, LOYALHANNA , PA . 15661
ORIENTATION 1.1 QUICK START
WELCOME TO THE LUXE® EXPERIENCE. Follow these simple steps to get your new Luxe® marker up and running in no time.
Connector Orientation
Tab on the Bottom
STEP ONE CHARGE THE BATTERY (INCLUDED)
Make sure the Luxe®’s internal Lithium-Polymer battery is fully charged. Remove the rubber grip from your Luxe® and connect the charger to the charging port on the front of the grip frame before plugging the charger into a domestic electrical outlet. The L-shaped slot on the charger's SATA connector only fits in one direction - make sure it is oriented correctly. The included charger will operate on either 110 or 240 volt standard AC power. The LED on the charger will glow solid red while charging, and solid green when the battery is fully charged. Do not use the included USB/SATA adapter for charging.
STEP TWO REINSTALL THE GRIP
REINSTALL the Luxe®’s RUBBER GRIP by first sliding its tabs into the slots on either side of the grip frame, then secure it in place with the four grip screws.
STEP THREE AFFIX THE BARREL BLOCKER (INCLUDED)
Assemble the Luxe® barrel (see Hardware 3.4) and screw it into your Luxe®. Slide the included barrel blocker over the barrel and secure its cord as far back on the Luxe® body as possible, cinching it tight. The barrel blocker is a critical piece of paintball safety equipment—nearly as important as paintball goggles. The barrel blocker must be fully seated on the marker's muzzle and secured in place with its strap any time the marker is stored or handled in an area where people are not properly protected by paintball goggles or paintball field netting.
STEP FOUR FILL & INSTALL YOUR AIR TANK (SOLD SEPARATELY)
YOUR Luxe® is designed to operate properly with high pressure compressed air (HPA—also commonly referred to in paintball as nitrogen or nitro) as its power source. Have your air system filled, following its manufacturer’s directions. Pull the Luxe® bottom-line charging handle out and forward to the off position, then screw the air system into the back of the ASA.
STEP FIVE INSTALL YOUR LOADER (SOLD SEPARATELY)
The anti-chop Vision™ system in your Luxe® will allow it to work with any loader. Best performance and highest rate of fire however, will only be possible with a high performance force-feed loader system. Open the marker's locking feedneck by pulling the lock lever away from the neck, then insert the loader and secure it in place by folding the lever back to its locked position. Loader necks vary in size from brand to brand. If the loader does not fit securely or the lock lever does not easily close, see Orientation 1.3 in this manual for feedneck clamp adjustment instructions.
STEP SIX TURN ON AIR
The first 1074 words, extracted from the PDF. Read the full manual above, or download it.