INSTRUCTION MANUAL Version 2.1 Indian Creek Design BushMaster series Model B2K Copyright 1993…. 2003 All Rights Reserved
No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Indian Creek Design, Inc. Trademark Notices: * Panther VTS is a registered trademark of Indian Creek Design, Inc. * Panther II VTS is a trademark of Indian Creek Design, Inc. * Puma is a trademark of Indian Creek Design, Inc. * Bobcat is a trademark of Indian Creek Design, Inc. * Thunder CAT is a trademark of Indian Creek Design, Inc. * Desert FOX is a trademark of Indian Creek Design, Inc. * 45/68 Magnum VTS is a trademark of Indian Creek Design, Inc. * BushMaster 2000 is a trademark of Indian Creek Design, Inc. * B2K is a trademark of Indian Creek Design, Inc. * B2K2 is a trademark of Indian Creek Design, Inc. * BKO is a trademark of Indian Creek Design, Inc. Notice is hereby given that this manual is part of the article owned in whole by Indian Creek Design, Inc., known as indicated in this manual and drawings. All rights of manufacture and reproduction of such articles or any part thereof are reserved by Indian Creek Design, Inc. Neither said article nor any part thereof may be manufactured or reproduced except by written authorization from Indian Creek Design, Inc. All proprietary rights and information are the sole property of Indian Creek Design, Inc.
STATEMENT OF LIABILITY Indian Creek Design, Inc., delivers this air gun with the understanding that Indian Creek Design, Inc., assumes no responsibility for its resale or safe handling. It can be considered a dangerous weapon if mishandled, abused, or the safety instructions are ignored. Indian Creek Design, Inc., assumes no responsibility for physical injury or property damage resulting from its use. Indian Creek Design, Inc., makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability or fitness for a particular purpose. The information in this document is subject to change without notice. Indian Creek Design, Inc., assumes no responsibility for any errors that may appear in this document.
WARNING: This is not a toy. Misuse may cause serious injury or death. Eye protection designed for paintball use must be worn by the user and any person within range. It is to be used by adults only. It is to be used on safety certified fields only. Obey all local, state and federal laws. Follow the rules of safe paintball gun handling. Read all instructions before use.
B2K OVERVIEW
OPERATION
The B2K is a quality marking instrument specially designed to meet the needs of the professional style tournament player. The B2K is an electronic solenoid actuated computer controlled marking device. The major components of the B2K are machined from solid, aircraft-grade aluminum, and then hard anodized per military specifications. No castings are used in the construction of the B2K, thereby providing the end user with a high-quality, precision-engineered marking instrument.
Read the entire manual before you prepare your B2K for firing. Safety and safe gun handling are the most important aspects of paintball sports. Please practice each of the following steps with an unloaded gun before attempting to charge your gun with compressed air and paint pellets. Do not load compressed air and paint pellets into your B2K until you feel completely confident with your ability to handle your B2K safely.
Paintball markers get a lot of abuse. Indian Creek Design, Inc., has built the B2K with this in mind. All internal parts, wear and contact surfaces have been heat treated or hard anodized. The toughest and most resilient materials and components have been used in the design of this instrument. The B2K uses a single standard 9-volt battery for operation. The circuitry is a microprocessor based digital controller. The B2K does not need tools in order to field-striped. Removing the field-strip link-pin of the bolt enables the removal of the entire bolt assembly. The B2K offers low-pressure operation. The main operating pressure is 180-220 PSI nominally adjusted to visually via the gauge on the primary (input) regulator. The secondary pressure is factory pre-set and regulated to 85-95 PSI. Gas usage is controlled through these 2 internal regulators. The unique feature of this gun is the regulator adjustment. This allows precise adjustment for the velocity control of the gun and for gas efficiency.
Keep your finger out of the trigger guard and away from the trigger; point the muzzle of the gun in a safe direction at all times. Keep the gun turned off until ready to operate. The B2K does not have a mechanical safety, only an on-off switch! Always keep your B2K pointed in a safe direction. Always use a barrel plug. Installing the 9 volt Power Source The B2K requires a single 9-volt battery as the electronic power source. The use of long life batteries is recommended. The 9-volt battery is located in the grip behind the trigger and below the on-off switch. The battery is accessed through the grip panel located on the left side of the gun.
The B2K comes with a removable barrel system. This feature allows the user to select a barrel that is most suitable for the playing conditions. All barrels are mirror-honed with a, step-bore and straight and spiral tip porting and stock length is 12".
Remove the 2 screws that hold the grip panel in place. Connect the battery to the terminal and place the battery inside the frame carefully being sure that the black and red wires to the terminal are toward the top. Make sure that there are no abrupt kinks and the wires are comfortably placed, do not force them into place. Replace the grip panel and 2 screws. If you need to remove the complete battery frame and grip follow these instructions. Before removing the tray, remove the grip frame side panel on the left side, exposing the CPU and battery. To remove the tray, use a 7/64 allen wrench and remove the four 6-32X1"…
The first 1011 words, extracted from the PDF. Read the full manual above, or download it.