• Unload the paintball marker (See Step 5B). • Put the paintball marker “On Safe” (See Step 2A). • If the CO2 source you are using has an on/off valve, turn it to the “Off Position”. Otherwise, with the paintball marker pointed in a SAFE DIRECTION, slowly unscrew the CO2 source. NOTE: You will experience a slight discharge of CO2 gas upon removal of the CO2 source: this is normal. Step 4. Cocking the Paintball Marker • Put the paintball marker “On Safe” (See Step 2A). • Point the paintball marker in a SAFE DIRECTION. • Pull the COCKING KNOB all the way back until you hear a click and the HAMMER is locked into position.
BONE DADDY (DMS01) BONE DADDY GT (DMS02) BONE DADDY RG (DMS03)
WARNING: Make sure the HAMMER ASSEMBLY is completely locked into position. If you release the COCKING KNOB without the HAMMER first being locked into position, the paintball marker can fire. Step 5. Loading and Unloading Paintballs
.68 Caliber CO2 Paintball Markers
WARNING: Use .68 caliber paintballs only. Never reuse ammunition. Use of any other ammunition can cause injury to you and/or others, or damage to the paintball marker.
OWNER’S MANUAL READ ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS PAINTBALL MARKER Incluye instrucciones en español al reverso
Diablo Marketing LLC Rts. 5 & 20, P.O. Box 308 East Bloomfield, NY 14443 DMS01-515
WARNING: This is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically for paintball must be worn by the user and any person within range. Recommend 18 years or older to purchase. Users under 18 must have adult supervision. Read all instructions before using. BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF THIS PAINTBALL MARKER. Please read this owner’s manual completely. And remember, this paintball marker is not a toy. Always carefully follow the safety instructions found in this owner’s manual and keep this manual in a safe place for future use. If you have any questions regarding your new paintball marker, please contact Diablo Marketing LLC, Customer Service at 1-800-724-7486 or 585-657-6161. STEPS FOR SAFE SHOOTING Step 1. Learning the Parts of Your New Paintball Marker Step 2. Operating the Safety Step 3. Installing and Removing the CO2 Source Step 4. Cocking the Paintball Marker Step 5. Loading and Unloading Paintballs
Step 6. Velocity Adjustment Step 7. Regulator Adjustment (not all models) Step 8. Aiming and Firing Safely Step 9. Maintaining Your Paintball Marker Step 10. Reviewing Safety
Step 1. Learning the Parts of Your New Paintball Marker Learning the names of the parts of your new paintball marker will help you to understand your owner’s manual (Fig. 1A, 1B & 1C). Use this manual to increase your enjoyment of this paintball marker. POWER FEED PORT CONNECTION
BALL LOCK
RECEIVER
BARREL
COCKING KNOB MUZZLE VELOCITY KNOB VOLUMIZER SAFETY GRIP FRAME
GAS ADAPTER TRIGGER MODEL DMS01
TRIGGER GUARD
Fig. 1A POWER FEED PORT CONNECTION
RAISED SIGHT RAIL
COCKING KNOB
MUZZLE
VELOCITY KNOB VOLUMIZER
GRIP FRAME
FOREGRIP
SAFETY
GAS ADAPTER
HOSE MODEL DMS02
TRIGGER
POWER FEED PORT CONNECTION
RECEIVER COCKING KNOB
EXPANSION CHAMBER
TRIGGER TRIGGER GUARD GAS ADAPTER WITH REGULATOR
HOSE MODEL DMS03
Fig. 1C Step 2. Operating the Safety
WARNING: Keep the paintball marker in the “ON SAFE” position until you are actually ready to shoot. Then push the SAFETY to the “OFF SAFE” position. A. To Put the Paintball Marker “ON SAFE:” • Locate the SAFETY above the TRIGGER. • Push the SAFETY from the left side all the way in. (Fig. 2) The SAFETY is not on unless it is pushed all the way in and the red circle around the SAFETY is not showing. The paintball marker will not fire when “On Safe”. Even when the SAFETY is “On Safe”, you should continue to handle the paintball marker safely. Do not ever point the paintball marker at anything you do not intend to shoot. • Place the BARREL GLOVE over the barrel (Fig. 3) B. To Take the Paintball Marker “OFF SAFE”: • Remove the BARREL GLOVE. • Push the SAFETY from the right side all the way in. (Fig. 2) • The paintball marker is ready to fire when “Off Safe”. When you can see the red circle around the SAFETY, the paintball marker is “Off Safe” and can be fired. Step 3. Installing and Removing the CO2 Source
PUSH IN FROM LEFT FOR “ON SAFE”
PUSH IN FROM RIGHT FOR “OFF SAFE”
WARNING: Keep hands away from escaping CO2 gas. It can cause frostbite if allowed to come in contact with skin. If the CO2 source you are using has an on/off valve, make sure it is in the “OFF POSITION” before attempting to remove it from the paintball marker. Do not expose the CO2 source to heat or store the CO2 source at temperatures above 130°F (54°C). Always follow the manufacturer’s warnings listed on the CO2 source for handling and storage. A. Installing the CO2 Source • Make sure the BARREL GLOVE is placed over the barrel (See Fig. 3) • Put the paintball marker “On Safe” (See Step 2A). • Screw the CO2 source into the GAS ADAPTER. • Tighten the CO2 source onto the GAS ADAPTER until you feel a solid stop. • If the CO2 source you are using has an on/off valve, turn the valve to the “On Position”. The paintball marker is now fully charged. NOTE: Do not store your paintball marker with the CO2 source attached. B. Removing the CO2 Source NOTE: Always remove the CO2 source before disassembling your paintball marker.
PULL TIGHT
BARREL GLOVE
SQUEEZE
A. Loading Paintballs • Make sure the BARREL GLOVE is placed over the BARREL (See Fig. 3) • Put the paintball marker “On Safe.” (See Step 2A) • Point the paintball marker in a SAFE DIRECTION. • Attach a PAINTBALL HOPPER onto the POWER FEED PORT. • Fill the PAINTBALL HOPPER with paintballs. • Rotate the BALL LOCK to allow paintballs to feed into the RECEIVER. B. Unloading the Paintballs VELOCITY KNOB • Put the paintball marker “On Safe”. (See Step 2A) DECREASE VELOCITY • Empty or remove the PAINTBALL HOPPER. (TURN KNOB COUNTER • Unscrew the BARREL and remove any paintballs from the BARREL, RECEIVER…
The first 1049 words, extracted from the PDF. Read the full manual above, or download it.