W W W . D A N G E R O U S P O W E R . C O M
WARNING
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES!
1. The DP G3 Spec-R is NOT A TOY. Treat it with the same respect and care you would a firearm.
7. Only use compressed air or nitrogen. DO NOT USE CO2!
14. Never put any body parts or foreign objects into the breech or feed tube.
2. Carelessness, misuse, and failure to adhere to the warning and guidelines printed in this Owner’s Manual may result in property damage, injury, or death. User assumes all risks associated with use of the DP G3 Spec-R.
8. Only use high quality, .68 caliber paintballs.
15. Always use the supplied barrel cover when your G3 Spec-R is not in use at the field. Doing so will help secure the safety of yourself and those around you.
3. Always ensure that proper safety gear - eyes, face, ear, and head protection - conforming to ASTM standard F1776 (USA) or CE (Europe) are worn at all times when paintballs are within range. 4. Persons under the age of 18 must have adult supervision at all times during use of the G3 Spec-R, or any paintball firing device. 5. Observe all local and national laws regarding rules and regulations. 6. The G3 Spec-R should only be used on a permitted and regulated paintball field where safety rules and guidelines are strictly enforced.
9. Never point your G3 Spec-R at an unintended target. 10. Always treat your G3 Spec-R as if it were loaded. 11. Keep your G3 Spec-R turned OFF until ready to use. 12. Always measure the velocity of paintballs from your G3 Spec-R with a suitable chronograph device before play. 13. Never look down the barrel or breech area of the G3 Spec-R without first ensuring that the marker is switched to the OFF position, with NO AIR in the marker. NOTE- SEE NOTE ON PAGE 3 FOR DIRECTIONS ON REMOVING RESIDUAL AIR FROM A POWERED ‘OFF” MARKER.
16. Never allow pressurized gas to come into contact with your body. Serious harm, injury, or death may occur. 17. When not in use, always turn your G3 Spec-R to the OFF position. 18. Promptly remove any paintballs from your G3 Spec-R when not in use. 19. Always remember to remove residual air from your G3 Spec-R before attempting maintenance or service.
NOTE- POWERING ‘ OFF’ THE MARKER WILL NOT AUTOMATICALLY REMOVE RESIDUAL AIR. TO SAFELY REMOVE RESIDUAL AIR, PLEASE DO THE FOLLOWING: A. Remove loader and paintballs from marker. B. Turn Eye Sensors to the OFF position. C. Point marker in a safe direction. D. Fire marker until all residual gas is removed.
21. Always store your G3 Spec-R in a safe place. 22. Do not discard the Owner’s Manual. In the event of transfer or resale, this guide must accompany the marker. 23. When in doubt, ALWAYS seek expert advice by contacting a reputable airsmith familiar with paintball markers, or by contacting DP Engineering’s Customer Service Staff.
20. Always remember to remove residual air from your G3 Spec-R before storage or transportation.
Extracted from the PDF. Read the full manual above, or download it.