ARMAGEDDONtm BY AIR AMERICA, INC.
Congratulations! You have purchased the most advanced high-pressure Air/Nitrogen Paintball system available to the Paintball World. Your Air America® ARMAGEDDONtm is engineered to provide a lifetime of performance and reliability, far exceeding the most rigid demands of the International tournament-level pro player. The ARMAGEDDONtm is a single stage regulator; Micro™ precision machined in Stainless Steel and high strength, tempered alloy Aluminum, designed to accept input working pressures up to 4500 PSI. With a 200 to 1100 PSI output pressure range, the ARMAGEDDONtm is totally compatible with virtually all of the markers currently used in the sport of Paintball. The ARMAGEDDONtm delivers unmatched tournament-level performance, high & low side pressure safeties, ambidextrous input/output hose and gauge positioning, fractional on-gun slide mounting rail adjustment, precision input and output gauges matched with the Military, Airline, and Space program, tried and proven, high pressure Composite Wrapped Bottles.
ARMAGEDDONtm ON-GUN CONFIGURATION In place of the 'cradle', used on the Air America®, 320™ and Raptor® series, the ARMAGEDDONtm uses the identical mounting rail system used on the Air America® Apocalypse™. The first step in mounting your ARMAGEDDONtm is to attach the mounting rail to the pistol grip of your marker. The rail is configured to use two 10-32 Allen screws with a center-to-center spacing of 3/4”. This is the standard thread and spacing found on AutoMags and Autocockers, as well as other popular markers. If your marker is equipped with a 'Lone Star' type M16 grip, contact your local dealer or Air America® for the appropriate adapter block. When the mounting rail has been secured, slide your ARMAGEDDONtm onto the dovetail portion of the rail. The rail can be installed with the long end facing either forward or to the rear. You can now position your ARMAGEDDONtm at the optimum point for your arm length and shooting style. A light to medium torque on the rail set-screw will secure your ARMAGEDDONtm in your selected position. Once your system has been mounted on the marker, attach the output hose from the regulated output port male quick disconnect fitting on the Aluminum Body of your ARMAGEDDONtm, to your marker, to complete the on-gun installation.
High Pressure Inlet Male Q/Fill™ Fitting
Mounting Rail
Regulated Output Port or Gauge
High Pressure: Bottle Pressure Status Gauge Regulated Pressure Burst Disk
Regulated Pressure Adjustment Set Screw Turn Set Screw: Clockwise to increase Regulated Output Pressure Counter Clock to Decrease Regulated Output Pressure
Split Ring Retainer
Note: Safety Caution! Do not install or use substandard non-rated fittings on your ARMAGEDDONtm or marker.
CHARGING THE SYSTEM Your ARMAGEDDONtm can be charged/filled, on or off your marker, totally independent of the Aluminum Body portion of the ARMAGEDDONtm that is secured to the pistol grip of your marker. The Air America® 4500 psi pressure rated Stainless Steel male quick disconnect Q/Fill™; quick fill assembly, is the male quick disconnect fitting closest to the bottle on the Stainless Steel 'Arm' of your ARMAGEDDONtm, opposite the bottle/tank/cylinder high pressure status gauge. The Stainless Steel 'Arm' is non-removable from your bottle/tank/cylinder. Do not attempt to remove the 'Arm' from your bottle/tank/cylinder. The Air America® 4500 psi pressure rated Stainless Steel male quick disconnect Q/fill™ is the standard Q/fill™ fitting used on all Air America® systems. If you have your own fill station, with a suitably rated Female fitting that is compatible with the Air America® Q/Fill™ male adapter, connect the rated Female quick disconnect to the ARMAGEDDONtm and follow the fill directions that pertain to your fill station. The fill operation for your ARMAGEDDONtm is identical to the procedure used with all other Air America® systems.
INITIAL ADJUSTMENTS Your ARMAGEDDONtm left the factory set for a regulated output pressure of 700 psi. With the introduction of the new 'Super Guns' and the popularity of custom modified markers, your marker may require a regulated output delivery pressure ranging from 150 to 1000 psi. The regulated output delivery pressure setting for your marker will depend on the performance requirements of your marker and the modifications made to your marker. Note: Check with your corresponding owner's manual, factory tech support staff or Airsmith, if in doubt regarding questions of performance pressures and tuning procedures for your marker. The regulated output delivery pressure is adjusted with the small 10/32 adjusting set screw located in the threaded Stainless Steel shaft on the front of the Aluminum Main Body of the ARMAGEDDONtm. You will need a suitable Allen key for this operation. Turning the set screw in, clockwise, as you face the front of your ARMAGEDDONtm, increases the regulated output pressure, turning the set screw out, counter-clockwise, reduces the regulated output pressure. Adjust the regulated output pressure set screw in 1/4-turn increments as you increase, or decrease, the regulated output pressure to your marker. NOTE: As you adjust the pressure setting cycle your marker several times, after each adjustment, to allow your marker to adjust to the new setting.
SERVICING YOUR ARMAGEDDONtm The ARMAGEDDONtm has been engineered to require an absolute minimum of service/maintenance. The following section has been included for those individuals who prefer to do their own service/maintenance. Your ARMAGEDDONtm can be completely disassembled using only a set of Allen keys; complete disassembly is rarely required. The basic components contained within the Aluminum Body of the ARMAGEDDONtm are the Regulated Outlet Pressure Gauge, Regulated Outlet Pressure Male Fitting, Regulated Outlet Pressure Burst Disk, Piston, Regulated Outlet Pressure Adjustment Strut and Set Screw, Piston Seal Carrier, MainSpring and Split Ring Retainer. The basic…
The first 914 words, extracted from the PDF. Read the full manual above, or download it.