Dye Proto SLG Manual - English

O W N E R ’ S W

M A N U A L B

TA B L E O F CO N T E N T S

- IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES PAGE 02

- QUICK START UP GUIDE PAGE 04

- SLG™ BOARD SETTINGS AND FUNCTIONS PAGE 06

- TRIGGER ADJUSTMENTS PAGE 1 1

INCLUDED WITH YOUR PROTO SLG™

- SLG™ Marker - Allen tool set including 0.50, 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16” and 1/4”. - 1/4 oz. Slick Lube™ - Parts Kit - Barrel Sock - Owner’s Manual - Warranty Card - 9V Battery

- SLG™ BOLT ASSEMBLY AND MAINTENANCE PAGE 12

The SLG™ comes with the tools required to perform general maintenance and setting up. For a complete service, the following tools are required: - 5/16” allen key - #0 Phillips head screw driver - A sharp pick to remove O-rings

- TROUBLE SHOOTING PAGE 24

W W W . P R O T O P A I N T B A L L . C O M

- SLG™ BOLT O-RING LIST PAGE 15

- FEED NECK ADJUSTMENT PAGE 16

- AIRPORT ADJUSTMENTS PAGE 18

- VELOCITY ADJUSTMENT PAGE 20

- HYPER3™ REGULATOR ADJUSTMENT AND MAINTENANCE PAGE 21

- ANTI CHOP EYES AND BALL DETENTS PAGE 22

- EXPLODED VIEW PAGE 28

- WARRANTY AND LEGAL INFORMATION PAGE 29

IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES

• The SLG™ marker is not a toy. Misuse may cause serious injury or death. • Please read, understand and follow the directions in the SLG™ owner’s manual.

• Never look into the barrel or breech area of the SLG™ when the marker is switched on and able to fire.

• Eye protection that is designed specifically for paintball and meets ASTM/CE standards must be worn by user and persons within range.

• Compressed gas is dangerous, do not allow compressed gas to come in contact with your skin or try to stop a leak by covering it with your hand.

• Recommend 18 years or older to purchase. Person under 18 must have adult supervision.

• Always fit a barrel blocking device to your SLG™ when not in use on the field of play.

• Always treat the SLG™ marker as if it were loaded and able to fire.

• The owner’s manual and any related warnings or instructions should always accompany the product for reference or in the event of resale and new ownership.

• Only use compressed air or nitrogen gas in the SLG™ marker. DO NOT USE CO2. • Do not exceed 850 psi input pressure. • Only use .68 caliber paintballs that meet ASTM/CE standards. • Ensure all air lines and fittings are tightened and secured before gassing up the SLG™. • Always chronograph the SLG™ marker before playing paintball. • Never shoot the SLG™ marker at velocities in excess of 300 feet per second, or at velocities greater than local or national laws allow.

• Do not point the SLG™ marker at anything that you do not intend to shoot. • Do not shoot at people, animals, houses, cars or anything not related to the sport of paintball. • Do not fire the SLG™ without the bolt screwed in completely. • If you read these instructions and do not fully understand them or are unsure of your ability to make necessary adjustments properly, call DYE Precision or your local pro shop for help.