Sci-Fi Board Manual For J4 Torque Software v0.9
Attention: A Paintball Marker is NOT a toy. Misuse can result in injury or death. Please understand the operation of this board before using it. Test your marker using safe practices to ensure proper board settings. Always make sure your board uses settings approved by the paintball field or event. ALWAYS wear eye protection that is specifically designed for paintball & conforms to the ASTM / CE standards.
There is a software update available for your board! Visit the www.SciFi-Paintball.com to download the latest board software. The update can be installed a from a PC via usb.
FIRING READY MODE:
Solenoid Socket
Photo-Eye & HES Socket
Red/Green/Blue LED Power ON: Tap Button Power OFF: Hold Button for 5 Seconds Enter Menu: Hold Button for 3 seconds
Eye Off: Hold Button 1 Second Eye On: Hold Button 1 Second
Turn on board: Tap Top Button The board boots up with a rainbow cycle of led colors, then enters FIRING MODE The marker is now ready to fire A PURPLE led will flash every 8 seconds while in firing mode
Turn off board: Hold Top Button for 5 seconds
RED led is solid Turn off the Photo-Eye: Hold Bottom Button for 1 second
YELLOW led flashes once Turn on the Photo-Eye: Hold Bottom Button for 1 second
GREEN led flashes once
Battery Sockets
Extracted from the PDF. Read the full manual above, or download it.